include/configs/ap_sh4a_4a.h

   1 /*
   2  * Configuation settings for the Alpha Project AP-SH4A-4A board
   3  *
   4  * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __AP_SH4A_4A_H
  10 #define __AP_SH4A_4A_H
  11
  12 #define CONFIG_CPU_SH7734       1
  13 #define CONFIG_AP_SH4A_4A       1
  14 #define CONFIG_400MHZ_MODE      1
  15 /* #define CONFIG_533MHZ_MODE   1 */
  16
  17 #define CONFIG_SYS_TEXT_BASE 0x8BFC0000
  18
  19 #define CONFIG_DISPLAY_BOARDINFO
  20 #undef  CONFIG_SHOW_BOOT_PROGRESS
  21
  22 /* Ether */
  23 #define CONFIG_SH_ETHER 1
  24 #define CONFIG_SH_ETHER_USE_PORT (0)
  25 #define CONFIG_SH_ETHER_PHY_ADDR (0x0)
  26 #define CONFIG_SH_ETHER_PHY_MODE (PHY_INTERFACE_MODE_GMII)
  27 #define CONFIG_SH_ETHER_SH7734_MII (0x02) /* GMII */
  28 #define CONFIG_BITBANGMII
  29 #define CONFIG_BITBANGMII_MULTI
  30
  31 /* undef to save memory */
  32 #define CONFIG_SYS_LONGHELP
  33 /* Monitor Command Prompt */
  34 /* Buffer size for input from the Console */
  35 #define CONFIG_SYS_CBSIZE               256
  36 /* Buffer size for Console output */
  37 #define CONFIG_SYS_PBSIZE               256
  38 /* max args accepted for monitor commands */
  39 #define CONFIG_SYS_MAXARGS              16
  40 /* Buffer size for Boot Arguments passed to kernel */
  41 #define CONFIG_SYS_BARGSIZE     512
  42 /* List of legal baudrate settings for this board */
  43 #define CONFIG_SYS_BAUDRATE_TABLE       { 115200 }
  44
  45 /* SCIF */
  46 #define CONFIG_SCIF                     1
  47 #define CONFIG_CONS_SCIF4       1
  48
  49 /* Suppress display of console information at boot */
  50
  51 /* SDRAM */
  52 #define CONFIG_SYS_SDRAM_BASE   (0x88000000)
  53 #define CONFIG_SYS_SDRAM_SIZE   (64 * 1024 * 1024)
  54 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
  55
  56 #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
  57 #define CONFIG_SYS_MEMTEST_END   (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE)
  58 /* Enable alternate, more extensive, memory test */
  59 #undef  CONFIG_SYS_ALT_MEMTEST
  60 /* Scratch address used by the alternate memory test */
  61 #undef  CONFIG_SYS_MEMTEST_SCRATCH
  62
  63 /* Enable temporary baudrate change while serial download */
  64 #undef  CONFIG_SYS_LOADS_BAUD_CHANGE
  65
  66 /* FLASH */
  67 #define CONFIG_FLASH_CFI_DRIVER 1
  68 #define CONFIG_SYS_FLASH_CFI
  69 #undef  CONFIG_SYS_FLASH_QUIET_TEST
  70 #define CONFIG_SYS_FLASH_EMPTY_INFO
  71 #define CONFIG_SYS_FLASH_BASE   (0xA0000000)
  72 #define CONFIG_SYS_MAX_FLASH_SECT       512
  73
  74 /* if you use all NOR Flash , you change dip-switch. Please see Manual. */
  75 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  76 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
  77
  78 /* Timeout for Flash erase operations (in ms) */
  79 #define CONFIG_SYS_FLASH_ERASE_TOUT     (3 * 1000)
  80 /* Timeout for Flash write operations (in ms) */
  81 #define CONFIG_SYS_FLASH_WRITE_TOUT     (3 * 1000)
  82 /* Timeout for Flash set sector lock bit operations (in ms) */
  83 #define CONFIG_SYS_FLASH_LOCK_TOUT      (3 * 1000)
  84 /* Timeout for Flash clear lock bit operations (in ms) */
  85 #define CONFIG_SYS_FLASH_UNLOCK_TOUT    (3 * 1000)
  86
  87 /*
  88  * Use hardware flash sectors protection instead
  89  * of U-Boot software protection
  90  */
  91 #undef  CONFIG_SYS_FLASH_PROTECTION
  92 #undef  CONFIG_SYS_DIRECT_FLASH_TFTP
  93
  94 /* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
  95 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE)
  96 /* Monitor size */
  97 #define CONFIG_SYS_MONITOR_LEN  (256 * 1024)
  98 /* Size of DRAM reserved for malloc() use */
  99 #define CONFIG_SYS_MALLOC_LEN   (256 * 1024)
 100 #define CONFIG_SYS_BOOTMAPSZ    (8 * 1024 * 1024)
 101
 102 /* ENV setting */
 103 #define CONFIG_ENV_OVERWRITE    1
 104 #define CONFIG_ENV_SECT_SIZE    (128 * 1024)
 105 #define CONFIG_ENV_SIZE         (CONFIG_ENV_SECT_SIZE)
 106 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 107 /* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
 108 #define CONFIG_ENV_OFFSET       (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
 109 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SECT_SIZE)
 110
 111 /* Board Clock */
 112 #if defined(CONFIG_400MHZ_MODE)
 113 #define CONFIG_SYS_CLK_FREQ 50000000
 114 #else
 115 #define CONFIG_SYS_CLK_FREQ 44444444
 116 #endif
 117 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
 118 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
 119 #define CONFIG_SYS_TMU_CLK_DIV      4
 120
 121 #endif  /* __AP_SH4A_4A_H */