include/configs/aristainetos-common.h

   1 /*
   2  * (C) Copyright 2015
   3  * (C) Copyright 2014
   4  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
   5  *
   6  * Based on:
   7  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   8  *
   9  * Configuration settings for the Freescale i.MX6Q SabreSD board.
  10  *
  11  * SPDX-License-Identifier:     GPL-2.0+
  12  */
  13 #ifndef __ARISTAINETOS_COMMON_CONFIG_H
  14 #define __ARISTAINETOS_COMMON_CONFIG_H
  15
  16 #include "mx6_common.h"
  17
  18 #define CONFIG_MACH_TYPE        4501
  19 #define CONFIG_MMCROOT          "/dev/mmcblk0p1"
  20
  21 /* Size of malloc() pool */
  22 #define CONFIG_SYS_MALLOC_LEN           (64 * SZ_1M)
  23
  24 #define CONFIG_MXC_UART
  25
  26 /* MMC Configs */
  27 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  28
  29 #define CONFIG_FEC_MXC
  30 #define CONFIG_MII
  31 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  32 #define CONFIG_ETHPRIME                 "FEC"
  33 #define CONFIG_FEC_MXC_PHYADDR          0
  34
  35 #define CONFIG_PHYLIB
  36 #define CONFIG_PHY_MICREL
  37
  38 #define CONFIG_SPI_FLASH_MTD
  39 #define CONFIG_MXC_SPI
  40 #define CONFIG_SF_DEFAULT_SPEED         20000000
  41 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  42 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
  43
  44 /* Command definition */
  45 #define CONFIG_CMD_BMODE
  46
  47 #define CONFIG_EXTRA_ENV_SETTINGS \
  48         "script=u-boot.scr\0" \
  49         "fit_file=/boot/system.itb\0" \
  50         "loadaddr=0x12000000\0" \
  51         "fit_addr_r=0x14000000\0" \
  52         "uboot=/boot/u-boot.imx\0" \
  53         "uboot_sz=d0000\0" \
  54         "rescue_sys_addr=f0000\0" \
  55         "rescue_sys_length=f10000\0" \
  56         "panel=lb07wv8\0" \
  57         "splashpos=m,m\0" \
  58         "console=" CONSOLE_DEV "\0" \
  59         "fdt_high=0xffffffff\0"   \
  60         "initrd_high=0xffffffff\0" \
  61         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
  62         "set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
  63                 "default ${board_type}\0" \
  64         "get_env=mw ${loadaddr} 0 0x20000;" \
  65                 "mmc rescan;" \
  66                 "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
  67                 "env import -t ${loadaddr}\0" \
  68         "default_env=mw ${loadaddr} 0 0x20000;" \
  69                 "env export -t ${loadaddr} serial# ethaddr eth1addr " \
  70                 "board_type panel;" \
  71                 "env default -a;" \
  72                 "env import -t ${loadaddr}\0" \
  73         "loadbootscript=" \
  74                 "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  75         "bootscript=echo Running bootscript from mmc ...; " \
  76                 "source\0" \
  77         "mmcpart=1\0" \
  78         "mmcdev=0\0" \
  79         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  80         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  81                 "root=${mmcroot}\0" \
  82         "mmcboot=echo Booting from mmc ...; " \
  83                 "run mmcargs addmtd addmisc set_fit_default;" \
  84                 "bootm ${fit_addr_r}\0" \
  85         "mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
  86                 "${fit_file}\0" \
  87         "mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
  88                 "${uboot}\0" \
  89         "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
  90                 "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
  91                 "setexpr uboot_maxsize ${uboot_sz} - 400;" \
  92                 "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
  93                 "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
  94                 "sf write ${loadaddr} 400 ${filesize};" \
  95                 "sf read ${cmp_buf} 400 ${uboot_sz};" \
  96                 "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
  97         "ubiboot=echo Booting from ubi ...; " \
  98                 "run ubiargs addmtd addmisc set_fit_default;" \
  99                 "bootm ${fit_addr_r}\0" \
 100         "rescueargs=setenv bootargs console=${console},${baudrate} " \
 101                 "root=/dev/ram rw\0 " \
 102         "rescueboot=echo Booting rescue system from NOR ...; " \
 103                 "run rescueargs addmtd addmisc set_fit_default;" \
 104                 "bootm ${fit_addr_r}\0" \
 105         "rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
 106                 "${rescue_sys_length}; imi ${fit_addr_r}\0" \
 107         CONFIG_EXTRA_ENV_BOARD_SETTINGS
 108
 109 #define CONFIG_BOOTCOMMAND \
 110         "mmc dev ${mmcdev};" \
 111         "if mmc rescan; then " \
 112                 "if run loadbootscript; then " \
 113                         "run bootscript; " \
 114                 "else " \
 115                         "if run mmc_load_fit; then " \
 116                                 "run mmcboot; " \
 117                         "else " \
 118                                 "if run ubifs_load_fit; then " \
 119                                         "run ubiboot; " \
 120                                 "else " \
 121                                         "if run rescue_load_fit; then " \
 122                                                 "run rescueboot; " \
 123                                         "else " \
 124                                                 "echo RESCUE SYSTEM BOOT " \
 125                                                         "FAILURE;" \
 126                                         "fi; " \
 127                                 "fi; " \
 128                         "fi; " \
 129                 "fi; " \
 130         "else " \
 131                 "if run ubifs_load_fit; then " \
 132                         "run ubiboot; " \
 133                 "else " \
 134                         "if run rescue_load_fit; then " \
 135                                 "run rescueboot; " \
 136                         "else " \
 137                                 "echo RESCUE SYSTEM BOOT FAILURE;" \
 138                         "fi; " \
 139                 "fi; " \
 140         "fi"
 141
 142 #define CONFIG_ARP_TIMEOUT              200UL
 143
 144 /* Print Buffer Size */
 145 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 146
 147 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM
 148 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x100000)
 149 #define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
 150
 151 #define CONFIG_STACKSIZE                (128 * 1024)
 152
 153 /* Physical Memory Map */
 154 #define CONFIG_NR_DRAM_BANKS            1
 155 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 156
 157 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 158 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 159 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 160
 161 #define CONFIG_SYS_INIT_SP_OFFSET \
 162         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 163 #define CONFIG_SYS_INIT_SP_ADDR \
 164         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 165
 166 /* Environment organization */
 167 #define CONFIG_ENV_SIZE                 (12 * 1024)
 168 #define CONFIG_ENV_IS_IN_SPI_FLASH
 169 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 170 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 171 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 172 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 173 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 174 #define CONFIG_ENV_SECT_SIZE            (0x010000)
 175 #define CONFIG_ENV_OFFSET               (0x0d0000)
 176 #define CONFIG_ENV_OFFSET_REDUND        (0x0e0000)
 177
 178 #define CONFIG_SYS_FSL_USDHC_NUM        2
 179
 180 /* I2C */
 181 #define CONFIG_SYS_I2C
 182 #define CONFIG_SYS_I2C_MXC
 183 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 184 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 185 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 186 #define CONFIG_SYS_I2C_SPEED            100000
 187 #define CONFIG_SYS_I2C_SLAVE            0x7f
 188 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x00} }
 189
 190 /* NAND stuff */
 191 #define CONFIG_CMD_NAND
 192 #define CONFIG_CMD_NAND_TRIMFFS
 193 #define CONFIG_NAND_MXS
 194 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 195 #define CONFIG_SYS_NAND_BASE            0x40000000
 196 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 197 #define CONFIG_SYS_NAND_ONFI_DETECTION
 198
 199 /* DMA stuff, needed for GPMI/MXS NAND support */
 200 #define CONFIG_APBH_DMA
 201 #define CONFIG_APBH_DMA_BURST
 202 #define CONFIG_APBH_DMA_BURST8
 203
 204 /* RTC */
 205 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 206 #define CONFIG_SYS_RTC_BUS_NUM  2
 207 #define CONFIG_RTC_M41T11
 208 #define CONFIG_CMD_DATE
 209
 210 /* USB Configs */
 211 #define CONFIG_USB_EHCI
 212 #define CONFIG_USB_EHCI_MX6
 213 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 214 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
 215 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
 216 #define CONFIG_MXC_USB_FLAGS    0
 217
 218 /* UBI support */
 219 #define CONFIG_LZO
 220 #define CONFIG_CMD_MTDPARTS
 221 #define CONFIG_MTD_PARTITIONS
 222 #define CONFIG_MTD_DEVICE
 223 #define CONFIG_RBTREE
 224 #define CONFIG_CMD_UBIFS
 225
 226 #define CONFIG_HW_WATCHDOG
 227 #define CONFIG_IMX_WATCHDOG
 228
 229 /* Framebuffer */
 230 #define CONFIG_VIDEO_IPUV3
 231 /* check this console not needed, after test remove it */
 232 #define CONFIG_VIDEO_BMP_RLE8
 233 #define CONFIG_SPLASH_SCREEN
 234 #define CONFIG_SPLASH_SCREEN_ALIGN
 235 #define CONFIG_BMP_16BPP
 236 #define CONFIG_VIDEO_LOGO
 237 #define CONFIG_VIDEO_BMP_LOGO
 238 #define CONFIG_IPUV3_CLK 198000000
 239 #define CONFIG_IMX_VIDEO_SKIP
 240
 241 #define CONFIG_CMD_BMP
 242
 243 #define CONFIG_PWM_IMX
 244 #define CONFIG_IMX6_PWM_PER_CLK 66000000
 245
 246 #endif /* __ARISTAINETOS_COMMON_CONFIG_H */