]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/at91-sama5_common.h
configs: Re-sync almost all of cmd/Kconfig
[people/ms/u-boot.git] / include / configs / at91-sama5_common.h
1 /*
2 * Common part of configuration settings for the AT91 SAMA5 board.
3 *
4 * Copyright (C) 2015 Atmel Corporation
5 * Josh Wu <josh.wu@atmel.com>
6 *
7 * SPDX-License-Identifier: GPL-2.0+
8 */
9
10 #ifndef __AT91_SAMA5_COMMON_H
11 #define __AT91_SAMA5_COMMON_H
12
13 #include <asm/hardware.h>
14
15 #define CONFIG_SYS_CACHELINE_SIZE 32
16
17 #define CONFIG_SYS_TEXT_BASE 0x26f00000
18
19 /* ARM asynchronous clock */
20 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768
21 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
22
23 #define CONFIG_ARCH_CPU_INIT
24
25 #ifndef CONFIG_SPL_BUILD
26 #define CONFIG_SKIP_LOWLEVEL_INIT
27 #endif
28
29 #define CONFIG_BOARD_EARLY_INIT_F
30 #define CONFIG_DISPLAY_CPUINFO
31
32 #define CONFIG_ENV_VARS_UBOOT_CONFIG
33 #define CONFIG_CMD_BOOTZ
34
35 /* general purpose I/O */
36 #define CONFIG_AT91_GPIO
37
38 #define CONFIG_BOOTDELAY 3
39
40 /*
41 * BOOTP options
42 */
43 #define CONFIG_BOOTP_BOOTFILESIZE
44 #define CONFIG_BOOTP_BOOTPATH
45 #define CONFIG_BOOTP_GATEWAY
46 #define CONFIG_BOOTP_HOSTNAME
47
48 /*
49 * Command line configuration.
50 */
51
52 #ifdef CONFIG_SYS_USE_MMC
53
54 #ifdef CONFIG_ENV_IS_IN_MMC
55 /* Use raw reserved sectors to save environment */
56 #define CONFIG_ENV_OFFSET 0x2000
57 #define CONFIG_ENV_SIZE 0x1000
58 #define CONFIG_SYS_MMC_ENV_DEV 0
59 #else
60 /* u-boot env in sd/mmc card */
61 #define CONFIG_ENV_IS_IN_FAT
62 #define CONFIG_FAT_WRITE
63 #define FAT_ENV_INTERFACE "mmc"
64 #define FAT_ENV_DEVICE_AND_PART "0"
65 #define FAT_ENV_FILE "uboot.env"
66 #define CONFIG_ENV_SIZE 0x4000
67 #endif
68
69 #define CONFIG_BOOTCOMMAND "if test ! -n ${dtb_name}; then " \
70 "setenv dtb_name at91-${board_name}.dtb; " \
71 "fi; " \
72 "fatload mmc 0:1 0x21000000 ${dtb_name}; " \
73 "fatload mmc 0:1 0x22000000 zImage; " \
74 "bootz 0x22000000 - 0x21000000"
75 #define CONFIG_BOOTARGS \
76 "console=ttyS0,115200 earlyprintk " \
77 "root=/dev/mmcblk0p2 rw rootwait"
78 #else
79 #define CONFIG_BOOTARGS \
80 "console=ttyS0,115200 earlyprintk " \
81 "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
82 "256K(env),256k(env_redundent),256k(spare)," \
83 "512k(dtb),6M(kernel)ro,-(rootfs) " \
84 "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
85
86 #ifdef CONFIG_SYS_USE_NANDFLASH
87 /* u-boot env in nand flash */
88 #define CONFIG_ENV_IS_IN_NAND
89 #define CONFIG_ENV_OFFSET 0xc0000
90 #define CONFIG_ENV_OFFSET_REDUND 0x100000
91 #define CONFIG_ENV_SIZE 0x20000
92 #define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \
93 "nand read 0x22000000 0x200000 0x600000;" \
94 "bootz 0x22000000 - 0x21000000"
95 #elif CONFIG_SYS_USE_SERIALFLASH
96 /* u-boot env in serial flash, by default is bus 0 and cs 0 */
97 #define CONFIG_ENV_IS_IN_SPI_FLASH
98 #define CONFIG_ENV_OFFSET 0x6000
99 #define CONFIG_ENV_SIZE 0x2000
100 #define CONFIG_ENV_SECT_SIZE 0x1000
101 #define CONFIG_BOOTCOMMAND "sf probe 0; " \
102 "sf read 0x21000000 0x60000 0xc000; " \
103 "sf read 0x22000000 0x6c000 0x394000; " \
104 "bootz 0x22000000 - 0x21000000"
105 #endif
106
107 #endif
108
109 #define CONFIG_BAUDRATE 115200
110
111 #define CONFIG_SYS_CBSIZE 256
112 #define CONFIG_SYS_MAXARGS 16
113 #define CONFIG_SYS_LONGHELP
114 #define CONFIG_CMDLINE_EDITING
115 #define CONFIG_AUTO_COMPLETE
116
117 /* Size of malloc() pool */
118 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
119
120 #endif