]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/at91-sama5_common.h
Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig
[people/ms/u-boot.git] / include / configs / at91-sama5_common.h
1 /*
2 * Common part of configuration settings for the AT91 SAMA5 board.
3 *
4 * Copyright (C) 2015 Atmel Corporation
5 * Josh Wu <josh.wu@atmel.com>
6 *
7 * SPDX-License-Identifier: GPL-2.0+
8 */
9
10 #ifndef __AT91_SAMA5_COMMON_H
11 #define __AT91_SAMA5_COMMON_H
12
13 #include <asm/hardware.h>
14
15 #define CONFIG_SYS_TEXT_BASE 0x26f00000
16
17 /* ARM asynchronous clock */
18 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768
19 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
20
21 #define CONFIG_ARCH_CPU_INIT
22
23 #ifndef CONFIG_SPL_BUILD
24 #define CONFIG_SKIP_LOWLEVEL_INIT
25 #endif
26
27 #define CONFIG_ENV_VARS_UBOOT_CONFIG
28
29 /* general purpose I/O */
30 #ifndef CONFIG_DM_GPIO
31 #define CONFIG_AT91_GPIO
32 #endif
33
34
35 /*
36 * BOOTP options
37 */
38 #define CONFIG_BOOTP_BOOTFILESIZE
39 #define CONFIG_BOOTP_BOOTPATH
40 #define CONFIG_BOOTP_GATEWAY
41 #define CONFIG_BOOTP_HOSTNAME
42
43 /*
44 * Command line configuration.
45 */
46
47 #ifdef CONFIG_SYS_USE_MMC
48
49 #ifdef CONFIG_ENV_IS_IN_MMC
50 /* Use raw reserved sectors to save environment */
51 #define CONFIG_ENV_OFFSET 0x2000
52 #define CONFIG_ENV_SIZE 0x1000
53 #define CONFIG_SYS_MMC_ENV_DEV 0
54 #else
55 /* u-boot env in sd/mmc card */
56 #define CONFIG_ENV_IS_IN_FAT
57 #define FAT_ENV_INTERFACE "mmc"
58 #define FAT_ENV_DEVICE_AND_PART "0"
59 #define FAT_ENV_FILE "uboot.env"
60 #define CONFIG_ENV_SIZE 0x4000
61 #endif
62
63 #define CONFIG_BOOTCOMMAND "if test ! -n ${dtb_name}; then " \
64 "setenv dtb_name at91-${board_name}.dtb; " \
65 "fi; " \
66 "fatload mmc 0:1 0x21000000 ${dtb_name}; " \
67 "fatload mmc 0:1 0x22000000 zImage; " \
68 "bootz 0x22000000 - 0x21000000"
69 #define CONFIG_BOOTARGS \
70 "console=ttyS0,115200 earlyprintk " \
71 "root=/dev/mmcblk0p2 rw rootwait"
72 #else
73 #define CONFIG_BOOTARGS \
74 "console=ttyS0,115200 earlyprintk " \
75 "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
76 "256K(env),256k(env_redundant),256k(spare)," \
77 "512k(dtb),6M(kernel)ro,-(rootfs) " \
78 "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
79
80 #ifdef CONFIG_SYS_USE_NANDFLASH
81 /* u-boot env in nand flash */
82 #define CONFIG_ENV_OFFSET 0xc0000
83 #define CONFIG_ENV_OFFSET_REDUND 0x100000
84 #define CONFIG_ENV_SIZE 0x20000
85 #define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \
86 "nand read 0x22000000 0x200000 0x600000;" \
87 "bootz 0x22000000 - 0x21000000"
88 #elif CONFIG_SYS_USE_SERIALFLASH
89 /* u-boot env in serial flash, by default is bus 0 and cs 0 */
90 #define CONFIG_ENV_IS_IN_SPI_FLASH
91 #define CONFIG_ENV_OFFSET 0x6000
92 #define CONFIG_ENV_SIZE 0x2000
93 #define CONFIG_ENV_SECT_SIZE 0x1000
94 #define CONFIG_BOOTCOMMAND "sf probe 0; " \
95 "sf read 0x21000000 0x60000 0xc000; " \
96 "sf read 0x22000000 0x6c000 0x394000; " \
97 "bootz 0x22000000 - 0x21000000"
98 #endif
99
100 #endif
101
102 #define CONFIG_SYS_CBSIZE 256
103 #define CONFIG_SYS_MAXARGS 16
104 #define CONFIG_SYS_LONGHELP
105 #define CONFIG_CMDLINE_EDITING
106 #define CONFIG_AUTO_COMPLETE
107
108 /* Size of malloc() pool */
109 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
110
111 #endif