include/configs/at91sam9261ek.h

   1 /*
   2  * (C) Copyright 2007-2008
   3  * Stelian Pop <stelian@popies.net>
   4  * Lead Tech Design <www.leadtechdesign.com>
   5  *
   6  * Configuation settings for the AT91SAM9261EK board.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 /* ARM asynchronous clock */
  15 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768           /* slow clock xtal */
  16 #define CONFIG_SYS_AT91_MAIN_CLOCK      18432000        /* 18.432 MHz crystal */
  17
  18 #ifdef CONFIG_AT91SAM9G10
  19 #define CONFIG_AT91SAM9G10EK            /* It's an Atmel AT91SAM9G10 EK*/
  20 #else
  21 #define CONFIG_AT91SAM9261EK            /* It's an Atmel AT91SAM9261 EK*/
  22 #endif
  23
  24 #include <asm/hardware.h>
  25
  26 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  27 #define CONFIG_SETUP_MEMORY_TAGS
  28 #define CONFIG_INITRD_TAG
  29
  30 #define CONFIG_SKIP_LOWLEVEL_INIT
  31
  32 #define CONFIG_DISPLAY_CPUINFO
  33
  34 #define CONFIG_OF_LIBFDT
  35
  36 #define CONFIG_SYS_GENERIC_BOARD
  37
  38 #define CONFIG_ATMEL_LEGACY
  39 #define CONFIG_SYS_TEXT_BASE            0x21f00000
  40
  41 /*
  42  * Hardware drivers
  43  */
  44
  45 /* gpio */
  46 #define CONFIG_AT91_GPIO
  47 #define CONFIG_AT91_GPIO_PULLUP         1
  48
  49 /* serial console */
  50 #define CONFIG_ATMEL_USART
  51 #define CONFIG_USART_BASE               ATMEL_BASE_DBGU
  52 #define CONFIG_USART_ID                 ATMEL_ID_SYS
  53 #define CONFIG_BAUDRATE                 115200
  54
  55 /* LCD */
  56 #define CONFIG_LCD
  57 #define LCD_BPP                         LCD_COLOR8
  58 #define CONFIG_LCD_LOGO
  59 #undef LCD_TEST_PATTERN
  60 #define CONFIG_LCD_INFO
  61 #define CONFIG_LCD_INFO_BELOW_LOGO
  62 #define CONFIG_SYS_WHITE_ON_BLACK
  63 #define CONFIG_ATMEL_LCD
  64 #ifdef CONFIG_AT91SAM9261EK
  65 #define CONFIG_ATMEL_LCD_BGR555
  66 #endif
  67
  68 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  69
  70 /* LED */
  71 #define CONFIG_AT91_LED
  72 #define CONFIG_RED_LED          AT91_PIN_PA23   /* this is the power led */
  73 #define CONFIG_GREEN_LED        AT91_PIN_PA13   /* this is the user1 led */
  74 #define CONFIG_YELLOW_LED       AT91_PIN_PA14   /* this is the user2 led */
  75
  76 #define CONFIG_BOOTDELAY        3
  77
  78 /*
  79  * BOOTP options
  80  */
  81 #define CONFIG_BOOTP_BOOTFILESIZE
  82 #define CONFIG_BOOTP_BOOTPATH
  83 #define CONFIG_BOOTP_GATEWAY
  84 #define CONFIG_BOOTP_HOSTNAME
  85
  86 /*
  87  * Command line configuration.
  88  */
  89 #include <config_cmd_default.h>
  90 #undef CONFIG_CMD_BDI
  91 #undef CONFIG_CMD_FPGA
  92 #undef CONFIG_CMD_IMI
  93 #undef CONFIG_CMD_IMLS
  94 #undef CONFIG_CMD_LOADS
  95 #undef CONFIG_CMD_SOURCE
  96
  97 #define CONFIG_CMD_PING
  98 #define CONFIG_CMD_DHCP
  99 #define CONFIG_CMD_NAND
 100 #define CONFIG_CMD_USB
 101
 102 /* SDRAM */
 103 #define CONFIG_NR_DRAM_BANKS            1
 104 #define CONFIG_SYS_SDRAM_BASE           0x20000000
 105 #define CONFIG_SYS_SDRAM_SIZE           0x04000000
 106 #define CONFIG_SYS_INIT_SP_ADDR \
 107         (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
 108
 109 /* DataFlash */
 110 #define CONFIG_ATMEL_DATAFLASH_SPI
 111 #define CONFIG_HAS_DATAFLASH
 112 #define CONFIG_SYS_MAX_DATAFLASH_BANKS          2
 113 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0     0xC0000000      /* CS0 */
 114 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3     0xD0000000      /* CS3 */
 115 #define AT91_SPI_CLK                            15000000
 116 #define DATAFLASH_TCSS                          (0x1a << 16)
 117 #define DATAFLASH_TCHS                          (0x1 << 24)
 118
 119 /* NAND flash */
 120 #ifdef CONFIG_CMD_NAND
 121 #define CONFIG_NAND_ATMEL
 122 #define CONFIG_SYS_MAX_NAND_DEVICE              1
 123 #define CONFIG_SYS_NAND_BASE                    0x40000000
 124 #define CONFIG_SYS_NAND_DBW_8
 125 /* our ALE is AD22 */
 126 #define CONFIG_SYS_NAND_MASK_ALE                (1 << 22)
 127 /* our CLE is AD21 */
 128 #define CONFIG_SYS_NAND_MASK_CLE                (1 << 21)
 129 #define CONFIG_SYS_NAND_ENABLE_PIN              AT91_PIN_PC14
 130 #define CONFIG_SYS_NAND_READY_PIN               AT91_PIN_PC15
 131
 132 #endif
 133
 134 /* NOR flash - no real flash on this board */
 135 #define CONFIG_SYS_NO_FLASH
 136
 137 /* Ethernet */
 138 #define CONFIG_DRIVER_DM9000
 139 #define CONFIG_DM9000_BASE              0x30000000
 140 #define DM9000_IO                       CONFIG_DM9000_BASE
 141 #define DM9000_DATA                     (CONFIG_DM9000_BASE + 4)
 142 #define CONFIG_DM9000_USE_16BIT
 143 #define CONFIG_DM9000_NO_SROM
 144 #define CONFIG_NET_RETRY_COUNT          20
 145 #define CONFIG_RESET_PHY_R
 146
 147 /* USB */
 148 #define CONFIG_USB_ATMEL
 149 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 150 #define CONFIG_USB_OHCI_NEW
 151 #define CONFIG_DOS_PARTITION
 152 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 153 #define CONFIG_SYS_USB_OHCI_REGS_BASE           0x00500000      /* AT91SAM9261_UHP_BASE */
 154 #ifdef CONFIG_AT91SAM9G10EK
 155 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "at91sam9g10"
 156 #else
 157 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "at91sam9261"
 158 #endif
 159 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      2
 160 #define CONFIG_USB_STORAGE
 161 #define CONFIG_CMD_FAT
 162
 163 #define CONFIG_SYS_LOAD_ADDR                    0x22000000      /* load address */
 164
 165 #define CONFIG_SYS_MEMTEST_START                CONFIG_SYS_SDRAM_BASE
 166 #define CONFIG_SYS_MEMTEST_END                  0x23e00000
 167
 168 #ifdef CONFIG_SYS_USE_DATAFLASH_CS0
 169
 170 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
 171 #define CONFIG_ENV_IS_IN_DATAFLASH
 172 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
 173 #define CONFIG_ENV_OFFSET       0x4200
 174 #define CONFIG_ENV_ADDR         (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
 175 #define CONFIG_ENV_SIZE         0x4200
 176 #define CONFIG_BOOTCOMMAND      "cp.b 0xC0084000 0x22000000 0x210000; bootm"
 177 #define CONFIG_BOOTARGS         "console=ttyS0,115200 "                 \
 178                                 "root=/dev/mtdblock0 "                  \
 179                                 "mtdparts=atmel_nand:-(root) "          \
 180                                 "rw rootfstype=jffs2"
 181
 182 #elif CONFIG_SYS_USE_DATAFLASH_CS3
 183
 184 /* bootstrap + u-boot + env + linux in dataflash on CS3 */
 185 #define CONFIG_ENV_IS_IN_DATAFLASH
 186 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + 0x8400)
 187 #define CONFIG_ENV_OFFSET       0x4200
 188 #define CONFIG_ENV_ADDR         (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + CONFIG_ENV_OFFSET)
 189 #define CONFIG_ENV_SIZE         0x4200
 190 #define CONFIG_BOOTCOMMAND      "cp.b 0xD0084000 0x22000000 0x210000; bootm"
 191 #define CONFIG_BOOTARGS         "console=ttyS0,115200 "                 \
 192                                 "root=/dev/mtdblock0 "                  \
 193                                 "mtdparts=atmel_nand:-(root) "          \
 194                                 "rw rootfstype=jffs2"
 195
 196 #else /* CONFIG_SYS_USE_NANDFLASH */
 197
 198 /* bootstrap + u-boot + env + linux in nandflash */
 199 #define CONFIG_ENV_IS_IN_NAND
 200 #define CONFIG_ENV_OFFSET               0xc0000
 201 #define CONFIG_ENV_OFFSET_REDUND        0x100000
 202 #define CONFIG_ENV_SIZE         0x20000         /* 1 sector = 128 kB */
 203 #define CONFIG_BOOTCOMMAND      "nand read 0x22000000 0x200000 0x300000; bootm"
 204 #define CONFIG_BOOTARGS                                                 \
 205         "console=ttyS0,115200 earlyprintk "                             \
 206         "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"          \
 207         "256k(env),256k(env_redundant),256k(spare),"                    \
 208         "512k(dtb),6M(kernel)ro,-(rootfs) "                             \
 209         "root=/dev/mtdblock7 rw rootfstype=jffs2"
 210 #endif
 211
 212 #define CONFIG_SYS_PROMPT               "U-Boot> "
 213 #define CONFIG_SYS_CBSIZE               256
 214 #define CONFIG_SYS_MAXARGS              16
 215 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 216 #define CONFIG_SYS_LONGHELP
 217 #define CONFIG_CMDLINE_EDITING
 218 #define CONFIG_AUTO_COMPLETE
 219
 220 /*
 221  * Size of malloc() pool
 222  */
 223 #define CONFIG_SYS_MALLOC_LEN           ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
 224
 225 #endif