include/configs/at91sam9m10g45ek.h

   1 /*
   2  * (C) Copyright 2007-2008
   3  * Stelian Pop <stelian@popies.net>
   4  * Lead Tech Design <www.leadtechdesign.com>
   5  *
   6  * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES).
   7  *
   8  * See file CREDITS for list of people who contributed to this
   9  * project.
  10  *
  11  * This program is free software; you can redistribute it and/or
  12  * modify it under the terms of the GNU General Public License as
  13  * published by the Free Software Foundation; either version 2 of
  14  * the License, or (at your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  24  * MA 02111-1307 USA
  25  */
  26
  27 #ifndef __CONFIG_H
  28 #define __CONFIG_H
  29
  30 #include <asm/hardware.h>
  31
  32 #define CONFIG_AT91_LEGACY
  33 #define CONFIG_ATMEL_LEGACY             /* required until (g)pio is fixed */
  34
  35 /* ARM asynchronous clock */
  36 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
  37 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
  38 #define CONFIG_SYS_HZ                   1000
  39
  40 #define CONFIG_AT91SAM9M10G45EK
  41 #define CONFIG_AT91FAMILY
  42 #define CONFIG_ARCH_CPU_INIT
  43 #undef CONFIG_USE_IRQ                   /* we don't need IRQ/FIQ stuff  */
  44
  45 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs      */
  46 #define CONFIG_SETUP_MEMORY_TAGS
  47 #define CONFIG_INITRD_TAG
  48 #define CONFIG_SKIP_LOWLEVEL_INIT
  49 #define CONFIG_BOARD_EARLY_INIT_F
  50 #define CONFIG_DISPLAY_CPUINFO
  51
  52 /* general purpose I/O */
  53 #define CONFIG_ATMEL_LEGACY             /* required until (g)pio is fixed */
  54 #define CONFIG_AT91_GPIO
  55 #define CONFIG_AT91_GPIO_PULLUP 1       /* keep pullups on peripheral pins */
  56
  57 /* serial console */
  58 #define CONFIG_ATMEL_USART
  59 #define CONFIG_USART_BASE               ATMEL_BASE_DBGU
  60 #define CONFIG_USART_ID                 ATMEL_ID_SYS
  61
  62 /*
  63  * This needs to be defined for the OHCI code to work but it is defined as
  64  * ATMEL_ID_UHPHS in the CPU specific header files.
  65  */
  66 #define ATMEL_ID_UHP            ATMEL_ID_UHPHS
  67
  68 /*
  69  * Specify the clock enable bit in the PMC_SCER register.
  70  */
  71 #define ATMEL_PMC_UHP           AT91SAM926x_PMC_UHP
  72
  73 /* LCD */
  74 #define CONFIG_LCD
  75 #define LCD_BPP                         LCD_COLOR8
  76 #define CONFIG_LCD_LOGO
  77 #undef LCD_TEST_PATTERN
  78 #define CONFIG_LCD_INFO
  79 #define CONFIG_LCD_INFO_BELOW_LOGO
  80 #define CONFIG_SYS_WHITE_ON_BLACK
  81 #define CONFIG_ATMEL_LCD
  82 #define CONFIG_ATMEL_LCD_RGB565
  83 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  84 /* board specific(not enough SRAM) */
  85 #define CONFIG_AT91SAM9G45_LCD_BASE             0x73E00000
  86
  87 /* LED */
  88 #define CONFIG_AT91_LED
  89 #define CONFIG_RED_LED          AT91_PIN_PD31   /* this is the user1 led */
  90 #define CONFIG_GREEN_LED        AT91_PIN_PD0    /* this is the user2 led */
  91
  92 #define CONFIG_BOOTDELAY        3
  93
  94 /*
  95  * BOOTP options
  96  */
  97 #define CONFIG_BOOTP_BOOTFILESIZE
  98 #define CONFIG_BOOTP_BOOTPATH
  99 #define CONFIG_BOOTP_GATEWAY
 100 #define CONFIG_BOOTP_HOSTNAME
 101
 102 /*
 103  * Command line configuration.
 104  */
 105 #include <config_cmd_default.h>
 106 #undef CONFIG_CMD_BDI
 107 #undef CONFIG_CMD_FPGA
 108 #undef CONFIG_CMD_IMI
 109 #undef CONFIG_CMD_IMLS
 110 #undef CONFIG_CMD_LOADS
 111
 112 #define CONFIG_CMD_PING
 113 #define CONFIG_CMD_DHCP
 114 #define CONFIG_CMD_NAND
 115 #define CONFIG_CMD_USB
 116
 117 /* SDRAM */
 118 #define CONFIG_NR_DRAM_BANKS            1
 119 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_CS6
 120 #define CONFIG_SYS_SDRAM_SIZE           0x08000000
 121
 122 #define CONFIG_SYS_INIT_SP_ADDR \
 123         (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
 124
 125 /* No NOR flash */
 126 #define CONFIG_SYS_NO_FLASH
 127
 128 /* NAND flash */
 129 #ifdef CONFIG_CMD_NAND
 130 #define CONFIG_NAND_ATMEL
 131 #define CONFIG_SYS_MAX_NAND_DEVICE              1
 132 #define CONFIG_SYS_NAND_BASE                    ATMEL_BASE_CS3
 133 #define CONFIG_SYS_NAND_DBW_8
 134 /* our ALE is AD21 */
 135 #define CONFIG_SYS_NAND_MASK_ALE                (1 << 21)
 136 /* our CLE is AD22 */
 137 #define CONFIG_SYS_NAND_MASK_CLE                (1 << 22)
 138 #define CONFIG_SYS_NAND_ENABLE_PIN              AT91_PIN_PC14
 139 #define CONFIG_SYS_NAND_READY_PIN               AT91_PIN_PC8
 140
 141 #endif
 142
 143 /* Ethernet */
 144 #define CONFIG_MACB
 145 #define CONFIG_RMII
 146 #define CONFIG_NET_RETRY_COUNT          20
 147 #define CONFIG_RESET_PHY_R
 148
 149 /* USB */
 150 #define CONFIG_USB_ATMEL
 151 #define CONFIG_USB_OHCI_NEW
 152 #define CONFIG_DOS_PARTITION
 153 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 154 #define CONFIG_SYS_USB_OHCI_REGS_BASE   ATMEL_BASE_HCI
 155 #define CONFIG_SYS_USB_OHCI_SLOT_NAME   "at91sam9g45"
 156 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      2
 157 #define CONFIG_USB_STORAGE
 158
 159 #define CONFIG_SYS_LOAD_ADDR            0x22000000      /* load address */
 160
 161 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
 162 #define CONFIG_SYS_MEMTEST_END          0x23e00000
 163
 164 /* bootstrap + u-boot + env in nandflash */
 165 #define CONFIG_ENV_IS_IN_NAND
 166 #define CONFIG_ENV_OFFSET               0x60000
 167 #define CONFIG_ENV_OFFSET_REDUND        0x80000
 168 #define CONFIG_ENV_SIZE                 0x20000
 169
 170 #define CONFIG_BOOTCOMMAND      "nand read 0x70000000 0x100000 0x200000;" \
 171         "bootm 0x70000000"
 172 #define CONFIG_BOOTARGS                                                 \
 173         "console=ttyS0,115200 earlyprintk "                             \
 174         "root=/dev/mtdblock5 "                                          \
 175         "mtdparts=atmel_nand:128k(bootstrap)ro,"                        \
 176         "256k(uboot)ro,128k(env1)ro,128k(env2)ro,"                      \
 177         "2M@1M(linux),-(root) "                                         \
 178         "rw rootfstype=jffs2"
 179
 180 #define CONFIG_BAUDRATE                 115200
 181 #define CONFIG_SYS_BAUDRATE_TABLE       {115200 , 19200, 38400, 57600, 9600 }
 182
 183 #define CONFIG_SYS_PROMPT               "U-Boot> "
 184 #define CONFIG_SYS_CBSIZE               256
 185 #define CONFIG_SYS_MAXARGS              16
 186 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 187 #define CONFIG_SYS_LONGHELP
 188 #define CONFIG_CMDLINE_EDITING
 189 #define CONFIG_AUTO_COMPLETE
 190 #define CONFIG_SYS_HUSH_PARSER
 191 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 192
 193 /*
 194  * Size of malloc() pool
 195  */
 196 #define CONFIG_SYS_MALLOC_LEN           ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
 197
 198 #define CONFIG_STACKSIZE        (32*1024)       /* regular stack */
 199
 200 #ifdef CONFIG_USE_IRQ
 201 #error CONFIG_USE_IRQ not supported
 202 #endif
 203
 204 #endif