]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/at91sam9rlek.h
arm64: ls2088ardb: Add distro secure boot support
[people/ms/u-boot.git] / include / configs / at91sam9rlek.h
1 /*
2 * (C) Copyright 2007-2008
3 * Stelian Pop <stelian@popies.net>
4 * Lead Tech Design <www.leadtechdesign.com>
5 *
6 * Configuation settings for the AT91SAM9RLEK board.
7 *
8 * SPDX-License-Identifier: GPL-2.0+
9 */
10
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13
14 #include <asm/hardware.h>
15
16 #define CONFIG_SYS_TEXT_BASE 0x21F00000
17
18 /* ARM asynchronous clock */
19 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
20 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* main clock xtal */
21
22 #define CONFIG_AT91SAM9RLEK 1 /* It's an AT91SAM9RLEK Board */
23
24 #define CONFIG_ARCH_CPU_INIT
25 #define CONFIG_SKIP_LOWLEVEL_INIT
26
27 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
28 #define CONFIG_SETUP_MEMORY_TAGS 1
29 #define CONFIG_INITRD_TAG 1
30
31 #define CONFIG_ATMEL_LEGACY
32
33 /*
34 * Hardware drivers
35 */
36
37 /* LCD */
38 #define LCD_BPP LCD_COLOR8
39 #define CONFIG_LCD_LOGO 1
40 #undef LCD_TEST_PATTERN
41 #define CONFIG_LCD_INFO 1
42 #define CONFIG_LCD_INFO_BELOW_LOGO 1
43 #define CONFIG_ATMEL_LCD 1
44 #define CONFIG_ATMEL_LCD_RGB565 1
45 /* Let board_init_f handle the framebuffer allocation */
46 #undef CONFIG_FB_ADDR
47
48 /*
49 * Command line configuration.
50 */
51
52 #define CONFIG_CMD_NAND 1
53
54 /* SDRAM */
55 #define CONFIG_NR_DRAM_BANKS 1
56 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
57 #define CONFIG_SYS_SDRAM_SIZE 0x04000000
58
59 #define CONFIG_SYS_INIT_SP_ADDR \
60 (ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
61
62 /* DataFlash */
63 #define CONFIG_ATMEL_DATAFLASH_SPI
64 #define CONFIG_HAS_DATAFLASH 1
65 #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
66 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
67 #define AT91_SPI_CLK 15000000
68 #define DATAFLASH_TCSS (0x1a << 16)
69 #define DATAFLASH_TCHS (0x1 << 24)
70
71 /* NAND flash */
72 #ifdef CONFIG_CMD_NAND
73 #define CONFIG_NAND_ATMEL
74 #define CONFIG_SYS_MAX_NAND_DEVICE 1
75 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
76 #define CONFIG_SYS_NAND_DBW_8 1
77 /* our ALE is AD21 */
78 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
79 /* our CLE is AD22 */
80 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
81 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PB6
82 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD17
83
84 #endif
85
86 /* Ethernet - not present */
87
88 /* USB - not supported */
89
90 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
91
92 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
93 #define CONFIG_SYS_MEMTEST_END 0x23e00000
94
95 #ifdef CONFIG_SYS_USE_DATAFLASH
96
97 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
98 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
99 #define CONFIG_ENV_OFFSET 0x4200
100 #define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
101 #define CONFIG_ENV_SIZE 0x4200
102 #define CONFIG_BOOTCOMMAND "cp.b 0xC0084000 0x22000000 0x210000; bootm"
103 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \
104 "root=/dev/mtdblock0 " \
105 "mtdparts=atmel_nand:-(root) "\
106 "rw rootfstype=jffs2"
107
108 #elif CONFIG_SYS_USE_NANDFLASH
109
110 /* bootstrap + u-boot + env + linux in nandflash */
111 #define CONFIG_ENV_OFFSET 0x120000
112 #define CONFIG_ENV_OFFSET_REDUND 0x100000
113 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
114 #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x600000; " \
115 "nand read 0x21000000 0x180000 0x80000; " \
116 "bootz 0x22000000 - 0x21000000"
117 #define CONFIG_BOOTARGS \
118 "console=ttyS0,115200 earlyprintk " \
119 "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
120 "256K(env),256k(env_redundant),256k(spare)," \
121 "512k(dtb),6M(kernel)ro,-(rootfs) " \
122 "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
123
124 #else /* CONFIG_SYS_USE_MMC */
125
126 /* bootstrap + u-boot + env + linux in mmc */
127 #define FAT_ENV_INTERFACE "mmc"
128 #define FAT_ENV_FILE "uboot.env"
129 #define FAT_ENV_DEVICE_AND_PART "0"
130 #define CONFIG_ENV_SIZE 0x4000
131 #define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91sam9rlek.dtb; " \
132 "fatload mmc 0:1 0x22000000 zImage; " \
133 "bootz 0x22000000 - 0x21000000"
134 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \
135 "mtdparts=atmel_nand:" \
136 "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
137 "root=/dev/mmcblk0p2 rw rootwait"
138 #endif
139
140 #define CONFIG_SYS_CBSIZE 256
141 #define CONFIG_SYS_MAXARGS 16
142 #define CONFIG_SYS_LONGHELP 1
143 #define CONFIG_CMDLINE_EDITING 1
144 #define CONFIG_AUTO_COMPLETE
145
146 /*
147 * Size of malloc() pool
148 */
149 #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
150
151 #endif