include/configs/atstk1006.h

   1 /*
   2  * Copyright (C) 2005-2006 Atmel Corporation
   3  *
   4  * Configuration settings for the ATSTK1002 CPU daughterboard
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include <asm/arch/hardware.h>
  12
  13 #define CONFIG_AVR32
  14 #define CONFIG_AT32AP
  15 #define CONFIG_AT32AP7000
  16 #define CONFIG_ATSTK1006
  17 #define CONFIG_ATSTK1000
  18
  19 /*
  20  * Timer clock frequency. We're using the CPU-internal COUNT register
  21  * for this, so this is equivalent to the CPU core clock frequency
  22  */
  23 #define CONFIG_SYS_HZ                           1000
  24
  25 /*
  26  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  27  * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
  28  * PLL frequency.
  29  * (CONFIG_SYS_OSC0_HZ * CONFIG_SYS_PLL0_MUL) / CONFIG_SYS_PLL0_DIV = PLL MHz
  30  */
  31 #define CONFIG_PLL
  32 #define CONFIG_SYS_POWER_MANAGER
  33 #define CONFIG_SYS_OSC0_HZ                      20000000
  34 #define CONFIG_SYS_PLL0_DIV                     1
  35 #define CONFIG_SYS_PLL0_MUL                     7
  36 #define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16
  37 /*
  38  * Set the CPU running at:
  39  * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz
  40  */
  41 #define CONFIG_SYS_CLKDIV_CPU                   0
  42 /*
  43  * Set the HSB running at:
  44  * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz
  45  */
  46 #define CONFIG_SYS_CLKDIV_HSB                   1
  47 /*
  48  * Set the PBA running at:
  49  * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz
  50  */
  51 #define CONFIG_SYS_CLKDIV_PBA                   2
  52 /*
  53  * Set the PBB running at:
  54  * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz
  55  */
  56 #define CONFIG_SYS_CLKDIV_PBB                   1
  57
  58 /* Reserve VM regions for SDRAM and NOR flash */
  59 #define CONFIG_SYS_NR_VM_REGIONS                2
  60
  61 /*
  62  * The PLLOPT register controls the PLL like this:
  63  *   icp = PLLOPT<2>
  64  *   ivco = PLLOPT<1:0>
  65  *
  66  * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
  67  */
  68 #define CONFIG_SYS_PLL0_OPT                     0x04
  69
  70 #define CONFIG_USART_BASE               ATMEL_BASE_USART1
  71 #define CONFIG_USART_ID                 1
  72
  73 /* User serviceable stuff */
  74 #define CONFIG_DOS_PARTITION
  75
  76 #define CONFIG_CMDLINE_TAG
  77 #define CONFIG_SETUP_MEMORY_TAGS
  78 #define CONFIG_INITRD_TAG
  79
  80 #define CONFIG_STACKSIZE                (2048)
  81
  82 #define CONFIG_BAUDRATE                 115200
  83 #define CONFIG_BOOTARGS                                                 \
  84         "console=ttyS0 root=mtd3 fbmem=2400k"
  85
  86 #define CONFIG_BOOTCOMMAND                                              \
  87         "fsload; bootm $(fileaddr)"
  88
  89 /*
  90  * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
  91  * data on the serial line may interrupt the boot sequence.
  92  */
  93 #define CONFIG_BOOTDELAY                1
  94 #define CONFIG_AUTOBOOT
  95 #define CONFIG_AUTOBOOT_KEYED
  96 #define CONFIG_AUTOBOOT_PROMPT          \
  97         "Press SPACE to abort autoboot in %d seconds\n", bootdelay
  98 #define CONFIG_AUTOBOOT_DELAY_STR       "d"
  99 #define CONFIG_AUTOBOOT_STOP_STR        " "
 100
 101 /*
 102  * After booting the board for the first time, new ethernet addresses
 103  * should be generated and assigned to the environment variables
 104  * "ethaddr" and "eth1addr". This is normally done during production.
 105  */
 106 #define CONFIG_OVERWRITE_ETHADDR_ONCE
 107
 108 /*
 109  * BOOTP options
 110  */
 111 #define CONFIG_BOOTP_SUBNETMASK
 112 #define CONFIG_BOOTP_GATEWAY
 113
 114
 115 /*
 116  * Command line configuration.
 117  */
 118 #include <config_cmd_default.h>
 119
 120 #define CONFIG_CMD_ASKENV
 121 #define CONFIG_CMD_DHCP
 122 #define CONFIG_CMD_EXT2
 123 #define CONFIG_CMD_FAT
 124 #define CONFIG_CMD_JFFS2
 125 #define CONFIG_CMD_MMC
 126
 127 #undef CONFIG_CMD_FPGA
 128 #undef CONFIG_CMD_SETGETDCR
 129 #undef CONFIG_CMD_SOURCE
 130 #undef CONFIG_CMD_XIMG
 131
 132 #define CONFIG_ATMEL_USART
 133 #define CONFIG_MACB
 134 #define CONFIG_PORTMUX_PIO
 135 #define CONFIG_SYS_NR_PIOS                      5
 136 #define CONFIG_SYS_HSDRAMC
 137 #define CONFIG_MMC
 138 #define CONFIG_GENERIC_ATMEL_MCI
 139 #define CONFIG_GENERIC_MMC
 140
 141 #define CONFIG_SYS_DCACHE_LINESZ                32
 142 #define CONFIG_SYS_ICACHE_LINESZ                32
 143
 144 #define CONFIG_NR_DRAM_BANKS            1
 145
 146 #define CONFIG_SYS_FLASH_CFI
 147 #define CONFIG_FLASH_CFI_DRIVER
 148
 149 #define CONFIG_SYS_FLASH_BASE                   0x00000000
 150 #define CONFIG_SYS_FLASH_SIZE                   0x800000
 151 #define CONFIG_SYS_MAX_FLASH_BANKS              1
 152 #define CONFIG_SYS_MAX_FLASH_SECT               135
 153
 154 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 155 #define CONFIG_SYS_TEXT_BASE            0x00000000
 156
 157 #define CONFIG_SYS_INTRAM_BASE                  INTERNAL_SRAM_BASE
 158 #define CONFIG_SYS_INTRAM_SIZE                  INTERNAL_SRAM_SIZE
 159 #define CONFIG_SYS_SDRAM_BASE                   EBI_SDRAM_BASE
 160
 161 #define CONFIG_ENV_IS_IN_FLASH
 162 #define CONFIG_ENV_SIZE                 65536
 163 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
 164
 165 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
 166
 167 #define CONFIG_SYS_MALLOC_LEN                   (256*1024)
 168 #define CONFIG_SYS_DMA_ALLOC_LEN                (16384)
 169
 170 /* Allow 4MB for the kernel run-time image */
 171 #define CONFIG_SYS_LOAD_ADDR                    (EBI_SDRAM_BASE + 0x00400000)
 172 #define CONFIG_SYS_BOOTPARAMS_LEN               (16 * 1024)
 173
 174 /* Other configuration settings that shouldn't have to change all that often */
 175 #define CONFIG_SYS_PROMPT                       "U-Boot> "
 176 #define CONFIG_SYS_CBSIZE                       256
 177 #define CONFIG_SYS_MAXARGS                      16
 178 #define CONFIG_SYS_PBSIZE                       (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 179 #define CONFIG_SYS_LONGHELP
 180
 181 #define CONFIG_SYS_MEMTEST_START                EBI_SDRAM_BASE
 182 #define CONFIG_SYS_MEMTEST_END                  (CONFIG_SYS_MEMTEST_START + 0x3f00000)
 183 #define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
 184
 185 #endif /* __CONFIG_H */