]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/axs101.h
05d2d45b251ac5f48915deb6d0365d1a56e061a3
[people/ms/u-boot.git] / include / configs / axs101.h
1 /*
2 * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7 #ifndef _CONFIG_AXS101_H_
8 #define _CONFIG_AXS101_H_
9
10 /*
11 * CPU configuration
12 */
13 #define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ
14
15 #define ARC_FPGA_PERIPHERAL_BASE 0xE0000000
16 #define ARC_APB_PERIPHERAL_BASE 0xF0000000
17 #define ARC_DWMMC_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x15000)
18 #define ARC_DWGMAC_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x18000)
19
20 /*
21 * Memory configuration
22 */
23 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
24
25 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
26 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
27 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 /* 512 Mb */
28
29 #define CONFIG_SYS_INIT_SP_ADDR \
30 (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
31
32 #define CONFIG_SYS_MALLOC_LEN 0x200000 /* 2 MB */
33 #define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MB */
34 #define CONFIG_SYS_LOAD_ADDR 0x82000000
35
36 /*
37 * This board might be of different versions so handle it
38 */
39 #define CONFIG_BOARD_TYPES
40 #define CONFIG_BOARD_EARLY_INIT_F
41
42 /*
43 * NAND Flash configuration
44 */
45 #define CONFIG_SYS_NO_FLASH
46 #define CONFIG_SYS_NAND_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x16000)
47 #define CONFIG_SYS_MAX_NAND_DEVICE 1
48
49 /*
50 * UART configuration
51 */
52 #define CONFIG_DW_SERIAL
53 #define CONFIG_SYS_NS16550_SERIAL
54 #define CONFIG_SYS_NS16550_CLK 33333333
55 #define CONFIG_SYS_NS16550_MEM32
56 #define CONFIG_BAUDRATE 115200
57
58 /*
59 * I2C configuration
60 */
61 #define CONFIG_SYS_I2C
62 #define CONFIG_I2C_ENV_EEPROM_BUS 2
63 #define CONFIG_SYS_I2C_SPEED 100000
64 #define CONFIG_SYS_I2C_SPEED1 100000
65 #define CONFIG_SYS_I2C_SPEED2 100000
66 #define CONFIG_SYS_I2C_SLAVE 0
67 #define CONFIG_SYS_I2C_SLAVE1 0
68 #define CONFIG_SYS_I2C_SLAVE2 0
69 #define CONFIG_SYS_I2C_BASE 0xE001D000
70 #define CONFIG_SYS_I2C_BASE1 0xE001E000
71 #define CONFIG_SYS_I2C_BASE2 0xE001F000
72 #define CONFIG_SYS_I2C_BUS_MAX 3
73 #define IC_CLK 50
74
75 /*
76 * EEPROM configuration
77 */
78 #define CONFIG_SYS_I2C_EEPROM_ADDR (0xA8 >> 1)
79 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
80 #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1
81 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
82 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 64
83
84 /*
85 * SD/MMC configuration
86 */
87 #define CONFIG_MMC
88 #define CONFIG_GENERIC_MMC
89 #define CONFIG_DWMMC
90 #define CONFIG_DOS_PARTITION
91
92 /*
93 * Ethernet PHY configuration
94 */
95 #define CONFIG_MII
96 #define CONFIG_PHY_GIGE
97
98 /*
99 * USB 1.1 configuration
100 */
101 #define CONFIG_USB_OHCI_NEW
102 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
103
104 /*
105 * Commands still not supported in Kconfig
106 */
107 #define CONFIG_CMD_NAND
108
109 #define CONFIG_AUTO_COMPLETE
110 #define CONFIG_SYS_MAXARGS 16
111
112 /*
113 * Environment settings
114 */
115 #define CONFIG_ENV_IS_IN_EEPROM
116 #define CONFIG_ENV_SIZE 0x00200 /* 512 bytes */
117 #define CONFIG_ENV_OFFSET 0
118
119 /*
120 * Environment configuration
121 */
122 #define CONFIG_BOOTDELAY 3
123 #define CONFIG_BOOTFILE "uImage"
124 #define CONFIG_BOOTARGS "console=ttyS3,115200n8"
125 #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
126
127 /*
128 * Console configuration
129 */
130 #define CONFIG_SYS_LONGHELP
131 #define CONFIG_SYS_CBSIZE 256
132 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
133 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
134 sizeof(CONFIG_SYS_PROMPT) + 16)
135
136 /*
137 * Misc utility configuration
138 */
139 #define CONFIG_BOUNCE_BUFFER
140
141 #endif /* _CONFIG_AXS101_H_ */