]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/bcm28155_ap.h
ns16550: move CONFIG_SYS_NS16550 to Kconfig
[people/ms/u-boot.git] / include / configs / bcm28155_ap.h
1 /*
2 * Copyright 2013 Broadcom Corporation.
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7 #ifndef __BCM28155_AP_H
8 #define __BCM28155_AP_H
9
10 #include <linux/sizes.h>
11 #include <asm/arch/sysmap.h>
12
13 /* CPU, chip, mach, etc */
14 #define CONFIG_KONA
15 #define CONFIG_SKIP_LOWLEVEL_INIT
16
17 /*
18 * Memory configuration
19 */
20 #define CONFIG_SYS_TEXT_BASE 0xae000000
21
22 #define CONFIG_SYS_SDRAM_BASE 0x80000000
23 #define CONFIG_SYS_SDRAM_SIZE 0x80000000
24 #define CONFIG_NR_DRAM_BANKS 1
25
26 #define CONFIG_SYS_MALLOC_LEN SZ_4M /* see armv7/start.S. */
27 #define CONFIG_STACKSIZE SZ_256K
28
29 /* GPIO Driver */
30 #define CONFIG_KONA_GPIO
31
32 /* MMC/SD Driver */
33 #define CONFIG_SDHCI
34 #define CONFIG_MMC_SDMA
35 #define CONFIG_KONA_SDHCI
36 #define CONFIG_MMC
37 #define CONFIG_GENERIC_MMC
38
39 #define CONFIG_SYS_SDIO_BASE0 SDIO1_BASE_ADDR
40 #define CONFIG_SYS_SDIO_BASE1 SDIO2_BASE_ADDR
41 #define CONFIG_SYS_SDIO_BASE2 SDIO3_BASE_ADDR
42 #define CONFIG_SYS_SDIO_BASE3 SDIO4_BASE_ADDR
43 #define CONFIG_SYS_SDIO0_MAX_CLK 48000000
44 #define CONFIG_SYS_SDIO1_MAX_CLK 48000000
45 #define CONFIG_SYS_SDIO2_MAX_CLK 48000000
46 #define CONFIG_SYS_SDIO3_MAX_CLK 48000000
47 #define CONFIG_SYS_SDIO0 "sdio1"
48 #define CONFIG_SYS_SDIO1 "sdio2"
49 #define CONFIG_SYS_SDIO2 "sdio3"
50 #define CONFIG_SYS_SDIO3 "sdio4"
51
52 /* I2C Driver */
53 #define CONFIG_SYS_I2C
54 #define CONFIG_SYS_I2C_KONA
55 #define CONFIG_SYS_SPD_BUS_NUM 3 /* Start with PMU bus */
56 #define CONFIG_SYS_MAX_I2C_BUS 4
57 #define CONFIG_SYS_I2C_BASE0 BSC1_BASE_ADDR
58 #define CONFIG_SYS_I2C_BASE1 BSC2_BASE_ADDR
59 #define CONFIG_SYS_I2C_BASE2 BSC3_BASE_ADDR
60 #define CONFIG_SYS_I2C_BASE3 PMU_BSC_BASE_ADDR
61
62 /* Timer Driver */
63 #define CONFIG_SYS_TIMER_RATE 32000
64 #define CONFIG_SYS_TIMER_COUNTER (TIMER_BASE_ADDR + 4) /* STCLO offset */
65
66 /* Init functions */
67 #define CONFIG_MISC_INIT_R /* board's misc_init_r function */
68
69 /* Some commands use this as the default load address */
70 #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
71
72 /* No mtest functions as recommended */
73
74 /*
75 * This is the initial SP which is used only briefly for relocating the u-boot
76 * image to the top of SDRAM. After relocation u-boot moves the stack to the
77 * proper place.
78 */
79 #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
80
81 /* Serial Info */
82 #define CONFIG_SYS_NS16550_SERIAL
83 /* Post pad 3 bytes after each reg addr */
84 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
85 #define CONFIG_SYS_NS16550_CLK 13000000
86 #define CONFIG_CONS_INDEX 1
87 #define CONFIG_SYS_NS16550_COM1 0x3e000000
88
89 #define CONFIG_BAUDRATE 115200
90
91 #define CONFIG_ENV_SIZE 0x10000
92 #define CONFIG_ENV_IS_NOWHERE
93
94 #define CONFIG_SYS_NO_FLASH /* Not using NAND/NOR unmanaged flash */
95
96 /* console configuration */
97 #define CONFIG_SYS_CBSIZE 1024 /* Console buffer size */
98 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
99 sizeof(CONFIG_SYS_PROMPT) + 16) /* Printbuffer size */
100 #define CONFIG_SYS_MAXARGS 64
101 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
102
103 /*
104 * One partition type must be defined for part.c
105 * This is necessary for the fatls command to work on an SD card
106 * for example.
107 */
108 #define CONFIG_DOS_PARTITION
109 #define CONFIG_EFI_PARTITION
110
111 /* version string, parser, etc */
112 #define CONFIG_VERSION_VARIABLE
113 #define CONFIG_AUTO_COMPLETE
114 #define CONFIG_SYS_HUSH_PARSER
115 #define CONFIG_CMDLINE_EDITING
116 #define CONFIG_SYS_LONGHELP
117
118 #define CONFIG_CRC32_VERIFY
119 #define CONFIG_MX_CYCLIC
120
121 /* Initial upstream - boot to cmd prompt only */
122 #define CONFIG_BOOTCOMMAND ""
123
124 /* Commands */
125 #define CONFIG_CMD_ASKENV
126 #define CONFIG_CMD_CACHE
127 #define CONFIG_CMD_FAT
128 #define CONFIG_CMD_I2C
129 #define CONFIG_CMD_MMC
130 #define CONFIG_CMD_BOOTZ
131 #define CONFIG_FAT_WRITE
132
133
134 /* Fastboot and USB OTG */
135 #define CONFIG_USB_FUNCTION_FASTBOOT
136 #define CONFIG_CMD_FASTBOOT
137 #define CONFIG_FASTBOOT_FLASH
138 #define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
139 #define CONFIG_SYS_CACHELINE_SIZE 64
140 #define CONFIG_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - SZ_1M)
141 #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE
142 #define CONFIG_USB_GADGET
143 #define CONFIG_USB_GADGET_DUALSPEED
144 #define CONFIG_USB_GADGET_VBUS_DRAW 0
145 #define CONFIG_USB_GADGET_S3C_UDC_OTG
146 #define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
147 #define CONFIG_USB_GADGET_DOWNLOAD
148 #define CONFIG_USBID_ADDR 0x34052c46
149 #define CONFIG_G_DNL_VENDOR_NUM 0x18d1 /* google */
150 #define CONFIG_G_DNL_PRODUCT_NUM 0x0d02 /* nexus one */
151 #define CONFIG_G_DNL_MANUFACTURER "Broadcom Corporation"
152
153 /* Fastboot and USB OTG */
154 #define CONFIG_USB_FUNCTION_FASTBOOT
155 #define CONFIG_CMD_FASTBOOT
156 #define CONFIG_FASTBOOT_FLASH
157 #define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
158 #define CONFIG_SYS_CACHELINE_SIZE 64
159 #define CONFIG_USB_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - SZ_1M)
160 #define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE
161 #define CONFIG_USB_GADGET
162 #define CONFIG_USB_GADGET_DUALSPEED
163 #define CONFIG_USB_GADGET_VBUS_DRAW 0
164 #define CONFIG_USB_GADGET_S3C_UDC_OTG
165 #define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
166 #define CONFIG_USB_GADGET_DOWNLOAD
167 #define CONFIG_USBID_ADDR 0x34052c46
168 #define CONFIG_G_DNL_VENDOR_NUM 0x18d1 /* google */
169 #define CONFIG_G_DNL_PRODUCT_NUM 0x0d02 /* nexus one */
170 #define CONFIG_G_DNL_MANUFACTURER "Broadcom Corporation"
171
172 #endif /* __BCM28155_AP_H */