include/configs/bcm_ep_board.h

   1 /*
   2  * Copyright 2014 Broadcom Corporation.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __BCM_EP_BOARD_H
   8 #define __BCM_EP_BOARD_H
   9
  10 #include <asm/arch/configs.h>
  11
  12 #define CONFIG_SKIP_LOWLEVEL_INIT
  13
  14 /*
  15  * Memory configuration
  16  * (these must be defined elsewhere)
  17  */
  18 #ifndef CONFIG_SYS_TEXT_BASE
  19 #error  CONFIG_SYS_TEXT_BASE must be defined!
  20 #endif
  21 #ifndef CONFIG_SYS_SDRAM_BASE
  22 #error  CONFIG_SYS_SDRAM_BASE must be defined!
  23 #endif
  24 #ifndef CONFIG_SYS_SDRAM_SIZE
  25 #error  CONFIG_SYS_SDRAM_SIZE must be defined!
  26 #endif
  27
  28 #define CONFIG_NR_DRAM_BANKS            1
  29
  30 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
  31 #define CONFIG_STACKSIZE                (256 * 1024)
  32
  33 /* Some commands use this as the default load address */
  34 #define CONFIG_SYS_LOAD_ADDR            CONFIG_SYS_SDRAM_BASE
  35
  36 /*
  37  * This is the initial SP which is used only briefly for relocating the u-boot
  38  * image to the top of SDRAM. After relocation u-boot moves the stack to the
  39  * proper place.
  40  */
  41 #define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SYS_TEXT_BASE
  42
  43 /* allow to overwrite serial and ethaddr */
  44 #define CONFIG_ENV_OVERWRITE
  45
  46 /* Serial Info */
  47 #define CONFIG_SYS_NS16550_SERIAL
  48
  49 #define CONFIG_BAUDRATE                 115200
  50
  51 #define CONFIG_ENV_SIZE                 0x2000
  52 #define CONFIG_ENV_IS_NOWHERE
  53
  54 #define CONFIG_SYS_NO_FLASH     /* Not using NAND/NOR unmanaged flash */
  55
  56 /* console configuration */
  57 #define CONFIG_SYS_CBSIZE               1024    /* Console buffer size */
  58 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
  59                         sizeof(CONFIG_SYS_PROMPT) + 16) /* Printbuffer size */
  60 #define CONFIG_SYS_MAXARGS              64
  61 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  62
  63 /*
  64  * One partition type must be defined for part.c
  65  * This is necessary for the fatls command to work on an SD card
  66  * for example.
  67  */
  68 #define CONFIG_DOS_PARTITION
  69
  70 /* version string, parser, etc */
  71 #define CONFIG_AUTO_COMPLETE
  72 #define CONFIG_CMDLINE_EDITING
  73 #define CONFIG_COMMAND_HISTORY
  74 #define CONFIG_SYS_LONGHELP
  75
  76 #define CONFIG_CRC32_VERIFY
  77 #define CONFIG_MX_CYCLIC
  78
  79 /* Commands */
  80 #define CONFIG_FAT_WRITE
  81
  82 /* SHA hashing */
  83 #define CONFIG_CMD_HASH
  84 #define CONFIG_HASH_VERIFY
  85 #define CONFIG_SHA1
  86 #define CONFIG_SHA256
  87
  88 /* Enable Time Command */
  89
  90 /* Misc utility code */
  91 #define CONFIG_BOUNCE_BUFFER
  92 #define CONFIG_CRC32_VERIFY
  93
  94 #endif /* __BCM_EP_BOARD_H */