include/configs/bcm_ep_board.h

   1 /*
   2  * Copyright 2014 Broadcom Corporation.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __BCM_EP_BOARD_H
   8 #define __BCM_EP_BOARD_H
   9
  10 #include <asm/arch/configs.h>
  11
  12 #define CONFIG_SKIP_LOWLEVEL_INIT
  13
  14 #define CONFIG_SYS_CACHELINE_SIZE       64
  15
  16 /*
  17  * Memory configuration
  18  * (these must be defined elsewhere)
  19  */
  20 #ifndef CONFIG_SYS_TEXT_BASE
  21 #error  CONFIG_SYS_TEXT_BASE must be defined!
  22 #endif
  23 #ifndef CONFIG_SYS_SDRAM_BASE
  24 #error  CONFIG_SYS_SDRAM_BASE must be defined!
  25 #endif
  26 #ifndef CONFIG_SYS_SDRAM_SIZE
  27 #error  CONFIG_SYS_SDRAM_SIZE must be defined!
  28 #endif
  29
  30 #define CONFIG_NR_DRAM_BANKS            1
  31
  32 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
  33 #define CONFIG_STACKSIZE                (256 * 1024)
  34
  35 /* Some commands use this as the default load address */
  36 #define CONFIG_SYS_LOAD_ADDR            CONFIG_SYS_SDRAM_BASE
  37
  38 /*
  39  * This is the initial SP which is used only briefly for relocating the u-boot
  40  * image to the top of SDRAM. After relocation u-boot moves the stack to the
  41  * proper place.
  42  */
  43 #define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SYS_TEXT_BASE
  44
  45 /* allow to overwrite serial and ethaddr */
  46 #define CONFIG_ENV_OVERWRITE
  47
  48 /* Serial Info */
  49 #define CONFIG_SYS_NS16550_SERIAL
  50
  51 #define CONFIG_BAUDRATE                 115200
  52
  53 #define CONFIG_ENV_SIZE                 0x2000
  54 #define CONFIG_ENV_IS_NOWHERE
  55
  56 #define CONFIG_SYS_NO_FLASH     /* Not using NAND/NOR unmanaged flash */
  57
  58 /* console configuration */
  59 #define CONFIG_SYS_CBSIZE               1024    /* Console buffer size */
  60 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
  61                         sizeof(CONFIG_SYS_PROMPT) + 16) /* Printbuffer size */
  62 #define CONFIG_SYS_MAXARGS              64
  63 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  64
  65 /*
  66  * One partition type must be defined for part.c
  67  * This is necessary for the fatls command to work on an SD card
  68  * for example.
  69  */
  70 #define CONFIG_DOS_PARTITION
  71
  72 /* version string, parser, etc */
  73 #define CONFIG_VERSION_VARIABLE
  74 #define CONFIG_AUTO_COMPLETE
  75 #define CONFIG_SYS_HUSH_PARSER
  76 #define CONFIG_CMDLINE_EDITING
  77 #define CONFIG_COMMAND_HISTORY
  78 #define CONFIG_SYS_LONGHELP
  79
  80 #define CONFIG_CRC32_VERIFY
  81 #define CONFIG_MX_CYCLIC
  82
  83 /* Commands */
  84 #define CONFIG_CMD_ASKENV
  85 #define CONFIG_CMD_CACHE
  86 #define CONFIG_CMD_FAT
  87 #define CONFIG_FAT_WRITE
  88
  89 /* SHA hashing */
  90 #define CONFIG_CMD_HASH
  91 #define CONFIG_HASH_VERIFY
  92 #define CONFIG_SHA1
  93 #define CONFIG_SHA256
  94
  95 /* Enable Time Command */
  96 #define CONFIG_CMD_TIME
  97
  98 #define CONFIG_CMD_BOOTZ
  99
 100 /* Misc utility code */
 101 #define CONFIG_BOUNCE_BUFFER
 102 #define CONFIG_CRC32_VERIFY
 103
 104 #endif /* __BCM_EP_BOARD_H */