include/configs/bcm_ep_board.h

   1 /*
   2  * Copyright 2014 Broadcom Corporation.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __BCM_EP_BOARD_H
   8 #define __BCM_EP_BOARD_H
   9
  10 #include <asm/arch/configs.h>
  11
  12 #define CONFIG_SKIP_LOWLEVEL_INIT
  13
  14 #define CONFIG_SYS_GENERIC_BOARD
  15
  16 /*
  17  * Memory configuration
  18  * (these must be defined elsewhere)
  19  */
  20 #ifndef CONFIG_SYS_TEXT_BASE
  21 #error  CONFIG_SYS_TEXT_BASE must be defined!
  22 #endif
  23 #ifndef CONFIG_SYS_SDRAM_BASE
  24 #error  CONFIG_SYS_SDRAM_BASE must be defined!
  25 #endif
  26 #ifndef CONFIG_SYS_SDRAM_SIZE
  27 #error  CONFIG_SYS_SDRAM_SIZE must be defined!
  28 #endif
  29
  30 #define CONFIG_NR_DRAM_BANKS            1
  31
  32 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
  33 #define CONFIG_STACKSIZE                (256 * 1024)
  34
  35 /* Some commands use this as the default load address */
  36 #define CONFIG_SYS_LOAD_ADDR            CONFIG_SYS_SDRAM_BASE
  37
  38 /* No mtest functions as recommended */
  39 #undef CONFIG_CMD_MEMORY
  40
  41 /*
  42  * This is the initial SP which is used only briefly for relocating the u-boot
  43  * image to the top of SDRAM. After relocation u-boot moves the stack to the
  44  * proper place.
  45  */
  46 #define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SYS_TEXT_BASE
  47
  48 /* allow to overwrite serial and ethaddr */
  49 #define CONFIG_ENV_OVERWRITE
  50
  51 /* Serial Info */
  52 #define CONFIG_SYS_NS16550
  53 #define CONFIG_SYS_NS16550_SERIAL
  54
  55 #define CONFIG_BAUDRATE                 115200
  56
  57 #define CONFIG_ENV_SIZE                 0x2000
  58 #define CONFIG_ENV_IS_NOWHERE
  59
  60 #define CONFIG_SYS_NO_FLASH     /* Not using NAND/NOR unmanaged flash */
  61
  62 /* console configuration */
  63 #define CONFIG_SYS_CBSIZE               1024    /* Console buffer size */
  64 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
  65                         sizeof(CONFIG_SYS_PROMPT) + 16) /* Printbuffer size */
  66 #define CONFIG_SYS_MAXARGS              64
  67 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  68
  69 /*
  70  * One partition type must be defined for part.c
  71  * This is necessary for the fatls command to work on an SD card
  72  * for example.
  73  */
  74 #define CONFIG_DOS_PARTITION
  75
  76 /* version string, parser, etc */
  77 #define CONFIG_VERSION_VARIABLE
  78 #define CONFIG_AUTO_COMPLETE
  79 #define CONFIG_SYS_HUSH_PARSER
  80 #define CONFIG_CMDLINE_EDITING
  81 #define CONFIG_COMMAND_HISTORY
  82 #define CONFIG_SYS_LONGHELP
  83
  84 #define CONFIG_CRC32_VERIFY
  85 #define CONFIG_MX_CYCLIC
  86
  87 /* Commands */
  88 #include <config_cmd_default.h>
  89
  90 #define CONFIG_CMD_ASKENV
  91 #define CONFIG_CMD_CACHE
  92 #define CONFIG_CMD_FAT
  93 #define CONFIG_FAT_WRITE
  94
  95 /* Enable devicetree support */
  96 #define CONFIG_OF_LIBFDT
  97
  98 /* SHA hashing */
  99 #define CONFIG_CMD_HASH
 100 #define CONFIG_HASH_VERIFY
 101 #define CONFIG_SHA1
 102 #define CONFIG_SHA256
 103
 104 /* Enable Time Command */
 105 #define CONFIG_CMD_TIME
 106
 107 #define CONFIG_CMD_BOOTZ
 108
 109 /* Misc utility code */
 110 #define CONFIG_BOUNCE_BUFFER
 111 #define CONFIG_CRC32_VERIFY
 112
 113 #endif /* __BCM_EP_BOARD_H */