include/configs/bct-brettl2.h

   1 /*
   2  * U-boot - Configuration file for BF536 brettl2 board
   3  */
   4
   5 #ifndef __CONFIG_BCT_BRETTL2_H__
   6 #define __CONFIG_BCT_BRETTL2_H__
   7
   8 #include <asm/config-pre.h>
   9
  10
  11 /*
  12  * Processor Settings
  13  */
  14 #define CONFIG_BFIN_CPU             bf536-0.3
  15 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
  16
  17
  18 /*
  19  * Clock Settings
  20  *      CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
  21  *      SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
  22  */
  23 /* CONFIG_CLKIN_HZ is any value in Hz                                   */
  24 #define CONFIG_CLKIN_HZ                 16384000
  25 /* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN             */
  26 /*                                                1 = CLKIN / 2         */
  27 #define CONFIG_CLKIN_HALF               0
  28 /* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass     */
  29 /*                                                1 = bypass PLL        */
  30 #define CONFIG_PLL_BYPASS               0
  31 /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL              */
  32 /* Values can range from 0-63 (where 0 means 64)                        */
  33 #define CONFIG_VCO_MULT                 24
  34 /* CCLK_DIV controls the core clock divider                             */
  35 /* Values can be 1, 2, 4, or 8 ONLY                                     */
  36 #define CONFIG_CCLK_DIV                 1
  37 /* SCLK_DIV controls the system clock divider                           */
  38 /* Values can range from 1-15                                           */
  39 #define CONFIG_SCLK_DIV                 3
  40 #define CONFIG_VR_CTL_VAL       (VLEV_110 | GAIN_20 | FREQ_1000)
  41
  42
  43 /*
  44  * Memory Settings
  45  */
  46 #define CONFIG_MEM_ADD_WDTH     9
  47 #define CONFIG_MEM_SIZE         32
  48
  49
  50 /*
  51  * SDRAM Settings
  52  */
  53 #define CONFIG_EBIU_SDRRC_VAL   0x07f6
  54 #define CONFIG_EBIU_SDGCTL_VAL  0x9111cd
  55
  56 #define CONFIG_EBIU_AMGCTL_VAL  (AMBEN_ALL)
  57 #define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
  58 #define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
  59
  60 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024)
  61 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024)
  62
  63
  64 /*
  65  * Network Settings
  66  */
  67 #ifndef __ADSPBF534__
  68 #define ADI_CMDS_NETWORK        1
  69 #define CONFIG_BFIN_MAC         1
  70 #define CONFIG_NETCONSOLE       1
  71 #define CONFIG_HOSTNAME         brettl2
  72 #define CONFIG_IPADDR           192.168.233.224
  73 #define CONFIG_GATEWAYIP        192.168.233.1
  74 #define CONFIG_SERVERIP         192.168.233.53
  75 #define CONFIG_ROOTPATH         "/romfs/brettl2"
  76 /* Uncomment next line to use fixed MAC address */
  77 /* #define CONFIG_ETHADDR       02:80:ad:20:31:e8 */
  78 #define CONFIG_LIB_RAND
  79 #endif
  80
  81
  82 /*
  83  * Flash Settings
  84  */
  85 #define CONFIG_FLASH_CFI_DRIVER
  86 #define CONFIG_SYS_FLASH_CFI
  87 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
  88 #define CONFIG_SYS_FLASH_PROTECTION
  89 #define CONFIG_SYS_FLASH_BASE                   0x20000000
  90 #define CONFIG_SYS_MAX_FLASH_BANKS              1
  91 #define CONFIG_SYS_MAX_FLASH_SECT               135
  92
  93
  94 /*
  95  * Env Storage Settings
  96  */
  97 #define CONFIG_ENV_IS_IN_FLASH 1
  98 #define CONFIG_ENV_OFFSET       0x4000
  99 #define CONFIG_ENV_SIZE         0x2000
 100 #define CONFIG_ENV_SECT_SIZE    0x12000
 101
 102 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
 103 #define ENV_IS_EMBEDDED
 104 #else
 105 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 106 #endif
 107
 108 #ifdef ENV_IS_EMBEDDED
 109 /* WARNING - the following is hand-optimized to fit within
 110  * the sector before the environment sector. If it throws
 111  * an error during compilation remove an object here to get
 112  * it linked after the configuration sector.
 113  */
 114 # define LDS_BOARD_TEXT \
 115         arch/blackfin/lib/built-in.o (.text*); \
 116         arch/blackfin/cpu/built-in.o (.text*); \
 117         . = DEFINED(env_offset) ? env_offset : .; \
 118         common/env_embedded.o (.text*);
 119 #endif
 120
 121
 122 /*
 123  * I2C Settings
 124  */
 125 #define CONFIG_SYS_I2C
 126 #define CONFIG_SYS_I2C_ADI
 127
 128
 129 /*
 130  * Misc Settings
 131  */
 132 #define CONFIG_BOOTDELAY        1
 133 #define CONFIG_LOADADDR         0x800000
 134 #define CONFIG_MISC_INIT_R
 135 #define CONFIG_UART_CONSOLE     0
 136 #define CONFIG_BAUDRATE         115200
 137 #define CONFIG_MTD_DEVICE
 138 #define CONFIG_MTD_PARTITIONS
 139 #define CONFIG_SYS_HUSH_PARSER
 140
 141 /*
 142  * Pull in common ADI header for remaining command/environment setup
 143  */
 144 #include <configs/bfin_adi_common.h>
 145
 146 /* disable unnecessary features */
 147 #undef CONFIG_BOOTM_RTEMS
 148 #undef CONFIG_BZIP2
 149 #undef CONFIG_KALLSYMS
 150
 151 #endif