include/configs/bf518f-ezbrd.h

   1 /*
   2  * U-Boot - Configuration file for BF518F EZBrd board
   3  */
   4
   5 #ifndef __CONFIG_BF518F_EZBRD_H__
   6 #define __CONFIG_BF518F_EZBRD_H__
   7
   8 #include <asm/config-pre.h>
   9
  10 /*
  11  * Processor Settings
  12  */
  13 #define CONFIG_BFIN_CPU             bf518-0.0
  14 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_PARA
  15
  16 /*
  17  * Clock Settings
  18  *      CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
  19  *      SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
  20  */
  21 /* CONFIG_CLKIN_HZ is any value in Hz                                   */
  22 #define CONFIG_CLKIN_HZ                 25000000
  23 /* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN             */
  24 /*                                                1 = CLKIN / 2         */
  25 #define CONFIG_CLKIN_HALF               0
  26 /* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass     */
  27 /*                                                1 = bypass PLL        */
  28 #define CONFIG_PLL_BYPASS               0
  29 /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL              */
  30 /* Values can range from 0-63 (where 0 means 64)                        */
  31 #define CONFIG_VCO_MULT                 16
  32 /* CCLK_DIV controls the core clock divider                             */
  33 /* Values can be 1, 2, 4, or 8 ONLY                                     */
  34 #define CONFIG_CCLK_DIV                 1
  35 /* SCLK_DIV controls the system clock divider                           */
  36 /* Values can range from 1-15                                           */
  37 #define CONFIG_SCLK_DIV                 5
  38
  39 /*
  40  * Memory Settings
  41  */
  42 /* This board has a 64meg MT48H32M16 */
  43 #define CONFIG_MEM_ADD_WDTH     10
  44 #define CONFIG_MEM_SIZE         64
  45
  46 #define CONFIG_EBIU_SDRRC_VAL   0x0096
  47 #define CONFIG_EBIU_SDGCTL_VAL  (SCTLE | CL_3 | PASR_ALL | TRAS_6 | TRP_3 | TRCD_3 | TWR_2 | PSS)
  48
  49 #define CONFIG_EBIU_AMGCTL_VAL  (AMCKEN | AMBEN_ALL)
  50 #define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_15 | B1RAT_15 | B1HT_3 | B1RDYPOL | B0WAT_15 | B0RAT_15 | B0HT_3 | B0RDYPOL)
  51 #define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_15 | B3RAT_15 | B3HT_3 | B3RDYPOL | B2WAT_15 | B2RAT_15 | B2HT_3 | B2RDYPOL)
  52
  53 #define CONFIG_SYS_MONITOR_LEN  (512 * 1024)
  54 #define CONFIG_SYS_MALLOC_LEN   (384 * 1024)
  55
  56 /*
  57  * Network Settings
  58  */
  59 #if !defined(__ADSPBF512__) && !defined(__ADSPBF514__)
  60 #define ADI_CMDS_NETWORK        1
  61 #define CONFIG_BFIN_MAC
  62 #define CONFIG_BFIN_MAC_PINS \
  63         { \
  64         P_MII0_ETxD0, \
  65         P_MII0_ETxD1, \
  66         P_MII0_ETxD2, \
  67         P_MII0_ETxD3, \
  68         P_MII0_ETxEN, \
  69         P_MII0_TxCLK, \
  70         P_MII0_PHYINT, \
  71         P_MII0_COL, \
  72         P_MII0_ERxD0, \
  73         P_MII0_ERxD1, \
  74         P_MII0_ERxD2, \
  75         P_MII0_ERxD3, \
  76         P_MII0_ERxDV, \
  77         P_MII0_ERxCLK, \
  78         P_MII0_CRS, \
  79         P_MII0_MDC, \
  80         P_MII0_MDIO, \
  81         0 }
  82 #define CONFIG_NETCONSOLE       1
  83 #endif
  84 #define CONFIG_HOSTNAME         bf518f-ezbrd
  85 #define CONFIG_PHY_ADDR         3
  86
  87 /*
  88  * Flash Settings
  89  */
  90 #define CONFIG_FLASH_CFI_DRIVER
  91 #define CONFIG_SYS_FLASH_BASE           0x20000000
  92 #define CONFIG_SYS_FLASH_CFI
  93 #define CONFIG_SYS_FLASH_PROTECTION
  94 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  95 #define CONFIG_SYS_MAX_FLASH_SECT       71
  96
  97 /*
  98  * SPI Settings
  99  */
 100 #define CONFIG_BFIN_SPI
 101 #define CONFIG_ENV_SPI_MAX_HZ   30000000
 102 #define CONFIG_SF_DEFAULT_SPEED 30000000
 103
 104 /*
 105  * Env Storage Settings
 106  */
 107 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
 108 #define CONFIG_ENV_IS_IN_SPI_FLASH
 109 #define CONFIG_ENV_OFFSET       0x10000
 110 #define CONFIG_ENV_SIZE         0x2000
 111 #define CONFIG_ENV_SECT_SIZE    0x10000
 112 #else
 113 #define CONFIG_ENV_IS_IN_FLASH
 114 #define CONFIG_ENV_OFFSET       0x4000
 115 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 116 #define CONFIG_ENV_SIZE         0x2000
 117 #define CONFIG_ENV_SECT_SIZE    0x2000
 118 #endif
 119 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 120
 121 /*
 122  * I2C Settings
 123  */
 124 #define CONFIG_SYS_I2C
 125 #define CONFIG_SYS_I2C_ADI
 126
 127 /*
 128  * SDH Settings
 129  */
 130 #if !defined(__ADSPBF512__)
 131 #define CONFIG_GENERIC_MMC
 132 #define CONFIG_MMC
 133 #define CONFIG_BFIN_SDH
 134 #endif
 135
 136 /*
 137  * Misc Settings
 138  */
 139 #define CONFIG_BOARD_EARLY_INIT_F
 140 #define CONFIG_MISC_INIT_R
 141 #define CONFIG_RTC_BFIN
 142 #define CONFIG_UART_CONSOLE     0
 143
 144 /*
 145  * Pull in common ADI header for remaining command/environment setup
 146  */
 147 #include <configs/bfin_adi_common.h>
 148
 149 #endif