include/configs/bf533-stamp.h

   1 /*
   2  * U-boot - Configuration file for BF533 STAMP board
   3  */
   4
   5 #ifndef __CONFIG_BF533_STAMP_H__
   6 #define __CONFIG_BF533_STAMP_H__
   7
   8 #include <asm/config-pre.h>
   9
  10
  11 /*
  12  * Processor Settings
  13  */
  14 #define CONFIG_BFIN_CPU             bf533-0.3
  15 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
  16
  17
  18 /*
  19  * Clock Settings
  20  *      CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
  21  *      SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
  22  */
  23 /* CONFIG_CLKIN_HZ is any value in Hz                                   */
  24 #define CONFIG_CLKIN_HZ                 11059200
  25 /* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN             */
  26 /*                                                1 = CLKIN / 2         */
  27 #define CONFIG_CLKIN_HALF               0
  28 /* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass     */
  29 /*                                                1 = bypass PLL        */
  30 #define CONFIG_PLL_BYPASS               0
  31 /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL              */
  32 /* Values can range from 0-63 (where 0 means 64)                        */
  33 #define CONFIG_VCO_MULT                 45
  34 /* CCLK_DIV controls the core clock divider                             */
  35 /* Values can be 1, 2, 4, or 8 ONLY                                     */
  36 #define CONFIG_CCLK_DIV                 1
  37 /* SCLK_DIV controls the system clock divider                           */
  38 /* Values can range from 1-15                                           */
  39 #define CONFIG_SCLK_DIV                 6 /* note: 1.2 boards can go faster */
  40
  41
  42 /*
  43  * Memory Settings
  44  */
  45 #define CONFIG_MEM_ADD_WDTH     11
  46 #define CONFIG_MEM_SIZE         128
  47
  48 #define CONFIG_EBIU_SDRRC_VAL   0x268
  49 #define CONFIG_EBIU_SDGCTL_VAL  0x911109
  50
  51 #define CONFIG_EBIU_AMGCTL_VAL  0xFF
  52 #define CONFIG_EBIU_AMBCTL0_VAL 0xBBC3BBC3
  53 #define CONFIG_EBIU_AMBCTL1_VAL 0x99B39983
  54
  55 #define CONFIG_SYS_MONITOR_LEN  (256 * 1024)
  56 #define CONFIG_SYS_MALLOC_LEN   (384 * 1024)
  57
  58
  59 /*
  60  * Network Settings
  61  */
  62 #define ADI_CMDS_NETWORK        1
  63 #define CONFIG_NET_MULTI
  64 #define CONFIG_SMC91111 1
  65 #define CONFIG_SMC91111_BASE    0x20300300
  66 #define SMC91111_EEPROM_INIT() \
  67         do { \
  68                 bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF1 | PF0); \
  69                 bfin_write_FIO_FLAG_C(PF1); \
  70                 bfin_write_FIO_FLAG_S(PF0); \
  71                 SSYNC(); \
  72         } while (0)
  73 #define CONFIG_HOSTNAME         bf533-stamp
  74 /* Uncomment next line to use fixed MAC address */
  75 /* #define CONFIG_ETHADDR       02:80:ad:20:31:b8 */
  76
  77
  78 /*
  79  * Flash Settings
  80  */
  81 #define CONFIG_FLASH_CFI_DRIVER
  82 #define CONFIG_SYS_FLASH_BASE           0x20000000
  83 #define CONFIG_SYS_FLASH_CFI
  84 #define CONFIG_SYS_FLASH_CFI_AMD_RESET
  85 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  86 #define CONFIG_SYS_MAX_FLASH_SECT       67
  87
  88
  89 /*
  90  * SPI Settings
  91  */
  92 #define CONFIG_BFIN_SPI
  93 #define CONFIG_ENV_SPI_MAX_HZ   30000000
  94 #define CONFIG_SF_DEFAULT_SPEED 30000000
  95 #define CONFIG_SPI_FLASH
  96 #define CONFIG_SPI_FLASH_ALL
  97
  98
  99 /*
 100  * Env Storage Settings
 101  */
 102 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
 103 #define CONFIG_ENV_IS_IN_SPI_FLASH
 104 #define CONFIG_ENV_OFFSET       0x10000
 105 #define CONFIG_ENV_SIZE         0x2000
 106 #define CONFIG_ENV_SECT_SIZE    0x10000
 107 #else
 108 #define CONFIG_ENV_IS_IN_FLASH
 109 #define CONFIG_ENV_OFFSET       0x4000
 110 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 111 #define CONFIG_ENV_SIZE         0x2000
 112 #define CONFIG_ENV_SECT_SIZE    0x2000
 113 #endif
 114 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
 115 #define ENV_IS_EMBEDDED
 116 #else
 117 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 118 #endif
 119 #ifdef ENV_IS_EMBEDDED
 120 /* WARNING - the following is hand-optimized to fit within
 121  * the sector before the environment sector. If it throws
 122  * an error during compilation remove an object here to get
 123  * it linked after the configuration sector.
 124  */
 125 # define LDS_BOARD_TEXT \
 126         arch/blackfin/lib/libblackfin.o (.text*); \
 127         arch/blackfin/cpu/libblackfin.o (.text*); \
 128         . = DEFINED(env_offset) ? env_offset : .; \
 129         common/env_embedded.o (.text*);
 130 #endif
 131
 132
 133 /*
 134  * I2C Settings
 135  */
 136 #define CONFIG_SOFT_I2C
 137 #define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF3
 138 #define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF2
 139
 140
 141 /*
 142  * Compact Flash / IDE / ATA Settings
 143  */
 144
 145 /* Enabled below option for CF support */
 146 /* #define CONFIG_STAMP_CF */
 147 #if defined(CONFIG_STAMP_CF)
 148 #define CONFIG_MISC_INIT_R
 149 #define CONFIG_DOS_PARTITION    1
 150 #undef  CONFIG_IDE_8xx_DIRECT           /* no pcmcia interface required */
 151 #undef  CONFIG_IDE_LED                  /* no led for ide supported */
 152 #undef  CONFIG_IDE_RESET                /* no reset for ide supported */
 153
 154 #define CONFIG_SYS_IDE_MAXBUS           1
 155 #define CONFIG_SYS_IDE_MAXDEVICE        (CONFIG_SYS_IDE_MAXBUS * 1)
 156
 157 #define CONFIG_SYS_ATA_BASE_ADDR        0x20200000
 158 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 159
 160 #define CONFIG_SYS_ATA_DATA_OFFSET      0x0020  /* data I/O */
 161 #define CONFIG_SYS_ATA_REG_OFFSET       0x0020  /* normal register accesses */
 162 #define CONFIG_SYS_ATA_ALT_OFFSET       0x0007  /* alternate registers */
 163
 164 #define CONFIG_SYS_ATA_STRIDE           2
 165
 166 #undef CONFIG_EBIU_AMBCTL1_VAL
 167 #define CONFIG_EBIU_AMBCTL1_VAL 0x99B3ffc2
 168 #endif
 169
 170
 171 /*
 172  * Misc Settings
 173  */
 174 #define CONFIG_RTC_BFIN
 175 #define CONFIG_UART_CONSOLE     0
 176
 177 /* FLASH/ETHERNET uses the same async bank */
 178 #define SHARED_RESOURCES        1
 179
 180 /* define to enable boot progress via leds */
 181 /* #define CONFIG_SHOW_BOOT_PROGRESS */
 182
 183 /* define to enable run status via led */
 184 /* #define CONFIG_STATUS_LED */
 185 #ifdef CONFIG_STATUS_LED
 186 #define CONFIG_GPIO_LED
 187 #define CONFIG_BOARD_SPECIFIC_LED
 188 /* use LED0 to indicate booting/alive */
 189 #define STATUS_LED_BOOT 0
 190 #define STATUS_LED_BIT GPIO_PF2
 191 #define STATUS_LED_STATE STATUS_LED_ON
 192 #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4)
 193 /* use LED1 to indicate crash */
 194 #define STATUS_LED_CRASH 1
 195 #define STATUS_LED_BIT1 GPIO_PF3
 196 #define STATUS_LED_STATE1 STATUS_LED_ON
 197 #define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
 198 /* #define STATUS_LED_BIT2 GPIO_PF4 */
 199 #endif
 200
 201 /* define to enable splash screen support */
 202 /* #define CONFIG_VIDEO */
 203
 204
 205 /*
 206  * Pull in common ADI header for remaining command/environment setup
 207  */
 208 #include <configs/bfin_adi_common.h>
 209
 210 #endif