include/configs/bf561-ezkit.h

   1 /*
   2  * U-boot - Configuration file for BF561 EZKIT board
   3  */
   4
   5 #ifndef __CONFIG_BF561_EZKIT_H__
   6 #define __CONFIG_BF561_EZKIT_H__
   7
   8 #include <asm/config-pre.h>
   9
  10
  11 /*
  12  * Processor Settings
  13  */
  14 #define CONFIG_BFIN_CPU             bf561-0.3
  15 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
  16
  17
  18 /*
  19  * Clock Settings
  20  *      CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
  21  *      SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
  22  */
  23 /* CONFIG_CLKIN_HZ is any value in Hz                                   */
  24 #define CONFIG_CLKIN_HZ                 30000000
  25 /* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN             */
  26 /*                                                1 = CLKIN / 2         */
  27 #define CONFIG_CLKIN_HALF               0
  28 /* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass     */
  29 /*                                                1 = bypass PLL        */
  30 #define CONFIG_PLL_BYPASS               0
  31 /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL              */
  32 /* Values can range from 0-63 (where 0 means 64)                        */
  33 #define CONFIG_VCO_MULT                 20
  34 /* CCLK_DIV controls the core clock divider                             */
  35 /* Values can be 1, 2, 4, or 8 ONLY                                     */
  36 #define CONFIG_CCLK_DIV                 1
  37 /* SCLK_DIV controls the system clock divider                           */
  38 /* Values can range from 1-15                                           */
  39 #define CONFIG_SCLK_DIV                 6
  40
  41
  42 /*
  43  * Memory Settings
  44  */
  45 #define CONFIG_MEM_ADD_WDTH     9
  46 #define CONFIG_MEM_SIZE         64
  47
  48 #define CONFIG_EBIU_SDRRC_VAL   0x306
  49 #define CONFIG_EBIU_SDGCTL_VAL  0x91114d
  50
  51 #define CONFIG_EBIU_AMGCTL_VAL  0x3F
  52 #define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
  53 #define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
  54
  55 #define CONFIG_SYS_MONITOR_LEN  (256 * 1024)
  56 #define CONFIG_SYS_MALLOC_LEN   (128 * 1024)
  57
  58
  59 /*
  60  * Network Settings
  61  */
  62 #define ADI_CMDS_NETWORK        1
  63 #define CONFIG_NET_MULTI
  64 #define CONFIG_SMC91111 1
  65 #define CONFIG_SMC91111_BASE    0x2C010300
  66 #define CONFIG_SMC_USE_32_BIT   1
  67 #define CONFIG_HOSTNAME         bf561-ezkit
  68 /* Uncomment next line to use fixed MAC address */
  69 /* #define CONFIG_ETHADDR       02:80:ad:20:31:e8 */
  70
  71
  72 /*
  73  * Flash Settings
  74  */
  75 #define CONFIG_SYS_FLASH_CFI
  76 #define CONFIG_FLASH_CFI_DRIVER
  77 #define CONFIG_SYS_FLASH_CFI_AMD_RESET
  78 #define CONFIG_SYS_FLASH_BASE           0x20000000
  79 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  80 #define CONFIG_SYS_MAX_FLASH_SECT       135
  81 /* The BF561-EZKIT uses a top boot flash */
  82 #define CONFIG_ENV_IS_IN_FLASH  1
  83 #define CONFIG_ENV_ADDR         0x20004000
  84 #define CONFIG_ENV_OFFSET       (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
  85 #define CONFIG_ENV_SIZE         0x2000
  86 #define CONFIG_ENV_SECT_SIZE    0x10000
  87 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
  88 #define ENV_IS_EMBEDDED
  89 #else
  90 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR
  91 #endif
  92 #ifdef ENV_IS_EMBEDDED
  93 /* WARNING - the following is hand-optimized to fit within
  94  * the sector before the environment sector. If it throws
  95  * an error during compilation remove an object here to get
  96  * it linked after the configuration sector.
  97  */
  98 # define LDS_BOARD_TEXT \
  99         arch/blackfin/cpu/traps.o               (.text .text.*); \
 100         arch/blackfin/cpu/interrupt.o   (.text .text.*); \
 101         arch/blackfin/cpu/serial.o              (.text .text.*); \
 102         common/dlmalloc.o               (.text .text.*); \
 103         lib/crc32.o             (.text .text.*); \
 104         lib/zlib.o              (.text .text.*); \
 105         board/bf561-ezkit/bf561-ezkit.o (.text .text.*); \
 106         . = DEFINED(env_offset) ? env_offset : .; \
 107         common/env_embedded.o           (.text .text.*);
 108 #endif
 109
 110
 111 /*
 112  * I2C Settings
 113  */
 114 #define CONFIG_SOFT_I2C
 115 #ifdef CONFIG_SOFT_I2C
 116 #define PF_SCL PF0
 117 #define PF_SDA PF1
 118 #define I2C_INIT \
 119         do { \
 120                 *pFIO0_DIR |= PF_SCL; \
 121                 SSYNC(); \
 122         } while (0)
 123 #define I2C_ACTIVE \
 124         do { \
 125                 *pFIO0_DIR |= PF_SDA; \
 126                 *pFIO0_INEN &= ~PF_SDA; \
 127                 SSYNC(); \
 128         } while (0)
 129 #define I2C_TRISTATE \
 130         do { \
 131                 *pFIO0_DIR &= ~PF_SDA; \
 132                 *pFIO0_INEN |= PF_SDA; \
 133                 SSYNC(); \
 134         } while (0)
 135 #define I2C_READ ((*pFIO0_FLAG_D & PF_SDA) != 0)
 136 #define I2C_SDA(bit) \
 137         do { \
 138                 if (bit) \
 139                         *pFIO0_FLAG_S = PF_SDA; \
 140                 else \
 141                         *pFIO0_FLAG_C = PF_SDA; \
 142                 SSYNC(); \
 143         } while (0)
 144 #define I2C_SCL(bit) \
 145         do { \
 146                 if (bit) \
 147                         *pFIO0_FLAG_S = PF_SCL; \
 148                 else \
 149                         *pFIO0_FLAG_C = PF_SCL; \
 150                 SSYNC(); \
 151         } while (0)
 152 #define I2C_DELAY               udelay(5)       /* 1/4 I2C clock duration */
 153
 154 #endif
 155
 156
 157 /*
 158  * Misc Settings
 159  */
 160 #define CONFIG_UART_CONSOLE     0
 161
 162
 163 /*
 164  * Pull in common ADI header for remaining command/environment setup
 165  */
 166 #include <configs/bfin_adi_common.h>
 167
 168 #endif