include/configs/bg0900.h

   1 /*
   2  * Copyright (C) 2013 Marek Vasut <marex@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6 #ifndef __CONFIGS_BG0900_H__
   7 #define __CONFIGS_BG0900_H__
   8
   9 /* System configurations */
  10 #define CONFIG_MX28                             /* i.MX28 SoC */
  11
  12 /* U-Boot Commands */
  13 #define CONFIG_SYS_NO_FLASH
  14 #include <config_cmd_default.h>
  15 #define CONFIG_DISPLAY_CPUINFO
  16 #define CONFIG_DOS_PARTITION
  17
  18 #define CONFIG_CMD_BOOTZ
  19 #define CONFIG_CMD_CACHE
  20 #define CONFIG_CMD_DHCP
  21 #define CONFIG_CMD_GPIO
  22 #define CONFIG_CMD_MII
  23 #define CONFIG_CMD_NAND
  24 #define CONFIG_CMD_NAND_TRIMFFS
  25 #define CONFIG_CMD_NET
  26 #define CONFIG_CMD_NFS
  27 #define CONFIG_CMD_PING
  28 #define CONFIG_CMD_SAVEENV
  29 #define CONFIG_CMD_SF
  30 #define CONFIG_CMD_SPI
  31
  32 /* Memory configuration */
  33 #define CONFIG_NR_DRAM_BANKS            1               /* 1 bank of DRAM */
  34 #define PHYS_SDRAM_1                    0x40000000      /* Base address */
  35 #define PHYS_SDRAM_1_SIZE               0x10000000      /* Max 256 MB RAM */
  36 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  37
  38 /* Environment */
  39 #define CONFIG_ENV_SIZE                 (16 * 1024)
  40 #define CONFIG_ENV_OVERWRITE
  41 #define CONFIG_ENV_IS_NOWHERE
  42
  43 /* FEC Ethernet on SoC */
  44 #ifdef  CONFIG_CMD_NET
  45 #define CONFIG_FEC_MXC
  46 #define CONFIG_NET_MULTI
  47 #endif
  48
  49 /* SPI */
  50 #ifdef CONFIG_CMD_SPI
  51 #define CONFIG_DEFAULT_SPI_BUS          2
  52 #define CONFIG_DEFAULT_SPI_CS           0
  53 #define CONFIG_DEFAULT_SPI_MODE         SPI_MODE_0
  54
  55 /* SPI FLASH */
  56 #ifdef CONFIG_CMD_SF
  57 #define CONFIG_SPI_FLASH
  58 #define CONFIG_SPI_FLASH_BAR
  59 #define CONFIG_SPI_FLASH_STMICRO
  60 #define CONFIG_SF_DEFAULT_BUS           2
  61 #define CONFIG_SF_DEFAULT_CS            0
  62 #define CONFIG_SF_DEFAULT_SPEED         40000000
  63 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  64
  65 #define CONFIG_ENV_SPI_BUS              2
  66 #define CONFIG_ENV_SPI_CS               0
  67 #define CONFIG_ENV_SPI_MAX_HZ           40000000
  68 #define CONFIG_ENV_SPI_MODE             SPI_MODE_0
  69 #endif
  70
  71 #endif
  72
  73 /* Boot Linux */
  74 #define CONFIG_BOOTDELAY        3
  75 #define CONFIG_BOOTFILE         "uImage"
  76 #define CONFIG_BOOTARGS         "console=ttyAMA0,115200"
  77 #define CONFIG_BOOTCOMMAND      "bootm"
  78 #define CONFIG_LOADADDR         0x42000000
  79 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
  80
  81 /* Extra Environment */
  82 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  83         "update_spi_firmware_filename=u-boot.sb\0"                      \
  84         "update_spi_firmware_maxsz=0x80000\0"                           \
  85         "update_spi_firmware="  /* Update the SPI flash firmware */     \
  86                 "if sf probe 2:0 ; then "                               \
  87                 "if tftp ${update_spi_firmware_filename} ; then "       \
  88                 "sf erase 0x0 +${filesize} ; "                          \
  89                 "sf write ${loadaddr} 0x0 ${filesize} ; "               \
  90                 "fi ; "                                                 \
  91                 "fi\0"
  92
  93 /* The rest of the configuration is shared */
  94 #include <configs/mxs.h>
  95
  96 #endif /* __CONFIGS_BG0900_H__ */