include/configs/bubinga.h

   1 /*
   2  * (C) Copyright 2000-2005
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * board/config.h - configuration options, board specific
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 /*
  32  * High Level Configuration Options
  33  * (easy to change)
  34  */
  35
  36 #define CONFIG_405EP            1       /* This is a PPC405 CPU         */
  37 #define CONFIG_4xx              1       /* ...member of PPC4xx family   */
  38 #define CONFIG_BUBINGA          1       /* ...on a BUBINGA board        */
  39
  40 #define CONFIG_SYS_TEXT_BASE    0xFFFC0000
  41
  42 /*
  43  * Include common defines/options for all AMCC eval boards
  44  */
  45 #define CONFIG_HOSTNAME         bubinga
  46 #include "amcc-common.h"
  47
  48 #define CONFIG_BOARD_EARLY_INIT_F 1     /* Call board_early_init_f      */
  49
  50 #define CONFIG_SYS_CLK_FREQ     33333333 /* external frequency to pll   */
  51
  52 #define CONFIG_NO_SERIAL_EEPROM
  53 /*#undef CONFIG_NO_SERIAL_EEPROM*/
  54 /*----------------------------------------------------------------------------*/
  55 #ifdef CONFIG_NO_SERIAL_EEPROM
  56
  57 /*
  58 !-------------------------------------------------------------------------------
  59 ! Defines for entry options.
  60 ! Note: Because the 405EP SDRAM controller does not support ECC, ECC DIMMs that
  61 !       are plugged in the board will be utilized as non-ECC DIMMs.
  62 !-------------------------------------------------------------------------------
  63 */
  64 #define        AUTO_MEMORY_CONFIG
  65 #define        DIMM_READ_ADDR 0xAB
  66 #define        DIMM_WRITE_ADDR 0xAA
  67
  68 /*
  69 !-------------------------------------------------------------------------------
  70 ! PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI,
  71 ! assuming a 33MHz input clock to the 405EP from the C9531.
  72 !-------------------------------------------------------------------------------
  73 */
  74 #define PLLMR0_DEFAULT   PLLMR0_266_133_66
  75 #define PLLMR1_DEFAULT   PLLMR1_266_133_66
  76
  77 #endif
  78 /*----------------------------------------------------------------------------*/
  79
  80 /*
  81  * Define here the location of the environment variables (FLASH or NVRAM).
  82  * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
  83  *       supported for backward compatibility.
  84  */
  85 #if 1
  86 #define CONFIG_ENV_IS_IN_FLASH     1    /* use FLASH for environment vars       */
  87 #else
  88 #define CONFIG_ENV_IS_IN_NVRAM  1       /* use NVRAM for environment vars       */
  89 #endif
  90
  91 /*
  92  * Default environment variables
  93  */
  94 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  95         CONFIG_AMCC_DEF_ENV                                             \
  96         CONFIG_AMCC_DEF_ENV_PPC                                         \
  97         CONFIG_AMCC_DEF_ENV_NOR_UPD                                     \
  98         "kernel_addr=fff80000\0"                                        \
  99         "ramdisk_addr=fff90000\0"                                       \
 100         ""
 101
 102 #define CONFIG_PHY_ADDR         1       /* PHY address                  */
 103 #define CONFIG_HAS_ETH0
 104 #define CONFIG_HAS_ETH1
 105 #define CONFIG_PHY1_ADDR        2       /* EMAC1 PHY address            */
 106
 107 #define CONFIG_RTC_DS174x       1       /* use DS1743 RTC in Bubinga    */
 108
 109 /*
 110  * Commands additional to the ones defined in amcc-common.h
 111  */
 112 #define CONFIG_CMD_DATE
 113 #define CONFIG_CMD_PCI
 114 #define CONFIG_CMD_SDRAM
 115 #define CONFIG_CMD_SNTP
 116
 117 #define CONFIG_SPD_EEPROM      1       /* use SPD EEPROM for setup    */
 118
 119 /*
 120  * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
 121  * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
 122  * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD value.
 123  * The Linux BASE_BAUD define should match this configuration.
 124  *    baseBaud = cpuClock/(uartDivisor*16)
 125  * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
 126  * set Linux BASE_BAUD to 403200.
 127  */
 128 #define CONFIG_CONS_INDEX       1       /* Use UART0                    */
 129 #undef  CONFIG_SYS_EXT_SERIAL_CLOCK           /* external serial clock */
 130 #undef  CONFIG_SYS_405_UART_ERRATA_59         /* 405GP/CR Rev. D silicon */
 131 #define CONFIG_SYS_BASE_BAUD       691200
 132
 133 /*-----------------------------------------------------------------------
 134  * I2C stuff
 135  *-----------------------------------------------------------------------
 136  */
 137 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0           400000
 138
 139 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} }   /* avoid i2c probe hangup (?) */
 140 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   6       /* 24C02 requires 5ms delay */
 141
 142 #if defined(CONFIG_CMD_EEPROM)
 143 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50    /* I2C boot EEPROM (24C02W)     */
 144 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1       /* Bytes of address             */
 145 #endif
 146
 147 /*-----------------------------------------------------------------------
 148  * PCI stuff
 149  *-----------------------------------------------------------------------
 150  */
 151 #define PCI_HOST_ADAPTER 0              /* configure ar pci adapter     */
 152 #define PCI_HOST_FORCE  1               /* configure as pci host        */
 153 #define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
 154
 155 #define CONFIG_PCI                      /* include pci support          */
 156 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
 157 #define CONFIG_PCI_HOST PCI_HOST_FORCE  /* select pci host function     */
 158 #define CONFIG_PCI_PNP                  /* do pci plug-and-play         */
 159                                         /* resource configuration       */
 160 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
 161
 162 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8   /* AMCC */
 163 #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe   /* Whatever */
 164 #define CONFIG_SYS_PCI_CLASSCODE       0x0600  /* PCI Class Code: bridge/host  */
 165 #define CONFIG_SYS_PCI_PTM1LA  0x00000000      /* point to sdram               */
 166 #define CONFIG_SYS_PCI_PTM1MS  0x80000001      /* 2GB, enable hard-wired to 1  */
 167 #define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
 168 #define CONFIG_SYS_PCI_PTM2LA  0x00000000      /* disabled                     */
 169 #define CONFIG_SYS_PCI_PTM2MS  0x00000000      /* disabled                     */
 170 #define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
 171
 172 /*-----------------------------------------------------------------------
 173  * External peripheral base address
 174  *-----------------------------------------------------------------------
 175  */
 176 #define CONFIG_SYS_KEY_REG_BASE_ADDR    0xF0100000
 177 #define CONFIG_SYS_IR_REG_BASE_ADDR     0xF0200000
 178 #define CONFIG_SYS_FPGA_REG_BASE_ADDR   0xF0300000
 179
 180 /*-----------------------------------------------------------------------
 181  * Start addresses for the final memory configuration
 182  * (Set up by the startup code)
 183  */
 184 #define CONFIG_SYS_SRAM_BASE            0xFFF00000
 185 #define CONFIG_SYS_SRAM_SIZE            (256 << 10)
 186 #define CONFIG_SYS_FLASH_BASE           0xFFF80000
 187
 188 /*-----------------------------------------------------------------------
 189  * FLASH organization
 190  */
 191 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks           */
 192 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* max number of sectors on one chip    */
 193
 194 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms)      */
 195 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms)      */
 196
 197 #define CONFIG_SYS_FLASH_ADDR0         0x5555
 198 #define CONFIG_SYS_FLASH_ADDR1         0x2aaa
 199 #define CONFIG_SYS_FLASH_WORD_SIZE     unsigned char
 200
 201 #ifdef CONFIG_ENV_IS_IN_FLASH
 202 #define CONFIG_ENV_SECT_SIZE    0x10000 /* size of one complete sector  */
 203 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
 204 #define CONFIG_ENV_SIZE         0x4000  /* Total Size of Environment Sector     */
 205
 206 /* Address and size of Redundant Environment Sector     */
 207 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
 208 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 209 #endif /* CONFIG_ENV_IS_IN_FLASH */
 210
 211 /*-----------------------------------------------------------------------
 212  * NVRAM organization
 213  */
 214 #define CONFIG_SYS_NVRAM_BASE_ADDR      0xf0000000      /* NVRAM base address   */
 215 #define CONFIG_SYS_NVRAM_SIZE           0x1ff8          /* NVRAM size   */
 216
 217 #ifdef CONFIG_ENV_IS_IN_NVRAM
 218 #define CONFIG_ENV_SIZE         0x0ff8          /* Size of Environment vars     */
 219 #define CONFIG_ENV_ADDR         \
 220         (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE)      /* Env  */
 221 #endif
 222
 223 /*
 224  * Init Memory Controller:
 225  *
 226  * BR0/1 and OR0/1 (FLASH)
 227  */
 228
 229 #define FLASH_BASE0_PRELIM      CONFIG_SYS_FLASH_BASE   /* FLASH bank #0        */
 230 #define FLASH_BASE1_PRELIM      0               /* FLASH bank #1        */
 231
 232 /*-----------------------------------------------------------------------
 233  * Definitions for initial stack pointer and data area (in data cache)
 234  */
 235 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
 236 #define CONFIG_SYS_TEMP_STACK_OCM        1
 237
 238 /* On Chip Memory location */
 239 #define CONFIG_SYS_OCM_DATA_ADDR        0xF8000000
 240 #define CONFIG_SYS_OCM_DATA_SIZE        0x1000
 241 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM             */
 242 #define CONFIG_SYS_INIT_RAM_SIZE        CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM    */
 243
 244 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 245 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 246
 247 /*-----------------------------------------------------------------------
 248  * External Bus Controller (EBC) Setup
 249  */
 250
 251 /* Memory Bank 0 (Flash/SRAM) initialization                                    */
 252 #define CONFIG_SYS_EBC_PB0AP           0x04006000
 253 #define CONFIG_SYS_EBC_PB0CR           0xFFF18000  /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit  */
 254
 255 /* Memory Bank 1 (NVRAM/RTC) initialization                                     */
 256 #define CONFIG_SYS_EBC_PB1AP           0x04041000
 257 #define CONFIG_SYS_EBC_PB1CR           0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit  */
 258
 259 /* Memory Bank 2 (not used) initialization                                      */
 260 #define CONFIG_SYS_EBC_PB2AP           0x00000000
 261 #define CONFIG_SYS_EBC_PB2CR           0x00000000
 262
 263 /* Memory Bank 2 (not used) initialization                                      */
 264 #define CONFIG_SYS_EBC_PB3AP           0x00000000
 265 #define CONFIG_SYS_EBC_PB3CR           0x00000000
 266
 267 /* Memory Bank 4 (FPGA regs) initialization                                     */
 268 #define CONFIG_SYS_EBC_PB4AP           0x01815000
 269 #define CONFIG_SYS_EBC_PB4CR           0xF0318000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit  */
 270
 271 /*-----------------------------------------------------------------------
 272  * Definitions for Serial Presence Detect EEPROM address
 273  * (to get SDRAM settings)
 274  */
 275 #define SPD_EEPROM_ADDRESS      0x55
 276
 277 /*-----------------------------------------------------------------------
 278  * Definitions for GPIO setup (PPC405EP specific)
 279  *
 280  * GPIO0[0]     - External Bus Controller BLAST output
 281  * GPIO0[1-9]   - Instruction trace outputs
 282  * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs
 283  * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs
 284  * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
 285  * GPIO0[24-27] - UART0 control signal inputs/outputs
 286  * GPIO0[28-29] - UART1 data signal input/output
 287  * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
 288  */
 289 #define CONFIG_SYS_GPIO0_OSRL          0x55555555
 290 #define CONFIG_SYS_GPIO0_OSRH          0x40000110
 291 #define CONFIG_SYS_GPIO0_ISR1L         0x00000000
 292 #define CONFIG_SYS_GPIO0_ISR1H         0x15555445
 293 #define CONFIG_SYS_GPIO0_TSRL          0x00000000
 294 #define CONFIG_SYS_GPIO0_TSRH          0x00000000
 295 #define CONFIG_SYS_GPIO0_TCR           0xFFFF8014
 296
 297 /*-----------------------------------------------------------------------
 298  * Some BUBINGA stuff...
 299  */
 300 #define NVRAM_BASE      0xF0000000
 301 #define FPGA_REG0       0xF0300000    /* FPGA Reg 0              */
 302 #define FPGA_REG1       0xF0300001    /* FPGA Reg 1              */
 303 #define NVRVFY1     0x4f532d4f    /* used to determine if state data in */
 304 #define NVRVFY2     0x50454e00    /* NVRAM initialized (ascii for OS-OPEN)*/
 305
 306 #define FPGA_REG0_F_RANGE     0x80       /* SDRAM PLL freq range              */
 307 #define FPGA_REG0_EXT_INT_DIS 0x20       /* External interface disable        */
 308 #define FPGA_REG0_LED_MASK    0x07       /* Board LEDs DS9, DS10, and DS11    */
 309 #define FPGA_REG0_LED0        0x04       /* Turn on LED0                      */
 310 #define FPGA_REG0_LED1        0x02       /* Turn on LED1                      */
 311 #define FPGA_REG0_LED2        0x01       /* Turn on LED2                      */
 312
 313 #define FPGA_REG1_SSPEC_DIS   0x80       /* C9531 Spread Spectrum disabled    */
 314 #define FPGA_REG1_OFFBD_PCICLK 0x40      /* Onboard PCI clock selected       */
 315 #define FPGA_REG1_CLOCK_MASK  0x30       /* Mask for C9531 output freq select */
 316 #define FPGA_REG1_CLOCK_BIT_SHIFT  4
 317 #define FPGA_REG1_PCI_INT_ARB 0x08       /* PCI Internal arbiter selected     */
 318 #define FPGA_REG1_PCI_FREQ    0x04       /* PCI Frequency select              */
 319 #define FPGA_REG1_OFFB_FLASH  0x02       /* Off board flash                   */
 320 #define FPGA_REG1_SRAM_BOOT   0x01       /* SRAM at 0xFFF80000 not Flash      */
 321
 322 #endif  /* __CONFIG_H */