include/configs/bubinga.h

   1 /*
   2  * (C) Copyright 2000-2005
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * board/config.h - configuration options, board specific
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 /*
  32  * High Level Configuration Options
  33  * (easy to change)
  34  */
  35
  36 #define CONFIG_405EP            1       /* This is a PPC405 CPU         */
  37 #define CONFIG_4xx              1       /* ...member of PPC4xx family   */
  38 #define CONFIG_BUBINGA          1       /* ...on a BUBINGA board        */
  39
  40 /*
  41  * Include common defines/options for all AMCC eval boards
  42  */
  43 #define CONFIG_HOSTNAME         bubinga
  44 #include "amcc-common.h"
  45
  46 #define CONFIG_BOARD_EARLY_INIT_F 1     /* Call board_early_init_f      */
  47
  48 #define CONFIG_SYS_CLK_FREQ     33333333 /* external frequency to pll   */
  49
  50 #define CONFIG_NO_SERIAL_EEPROM
  51 /*#undef CONFIG_NO_SERIAL_EEPROM*/
  52 /*----------------------------------------------------------------------------*/
  53 #ifdef CONFIG_NO_SERIAL_EEPROM
  54
  55 /*
  56 !-------------------------------------------------------------------------------
  57 ! Defines for entry options.
  58 ! Note: Because the 405EP SDRAM controller does not support ECC, ECC DIMMs that
  59 !       are plugged in the board will be utilized as non-ECC DIMMs.
  60 !-------------------------------------------------------------------------------
  61 */
  62 #define        AUTO_MEMORY_CONFIG
  63 #define        DIMM_READ_ADDR 0xAB
  64 #define        DIMM_WRITE_ADDR 0xAA
  65
  66 /*
  67 !-------------------------------------------------------------------------------
  68 ! PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI,
  69 ! assuming a 33MHz input clock to the 405EP from the C9531.
  70 !-------------------------------------------------------------------------------
  71 */
  72 #define PLLMR0_DEFAULT   PLLMR0_266_133_66
  73 #define PLLMR1_DEFAULT   PLLMR1_266_133_66
  74
  75 #endif
  76 /*----------------------------------------------------------------------------*/
  77
  78 /*
  79  * Define here the location of the environment variables (FLASH or NVRAM).
  80  * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
  81  *       supported for backward compatibility.
  82  */
  83 #if 1
  84 #define CONFIG_ENV_IS_IN_FLASH     1    /* use FLASH for environment vars       */
  85 #else
  86 #define CONFIG_ENV_IS_IN_NVRAM  1       /* use NVRAM for environment vars       */
  87 #endif
  88
  89 /*
  90  * Default environment variables
  91  */
  92 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  93         CONFIG_AMCC_DEF_ENV                                             \
  94         CONFIG_AMCC_DEF_ENV_PPC                                         \
  95         CONFIG_AMCC_DEF_ENV_NOR_UPD                                     \
  96         "kernel_addr=fff80000\0"                                        \
  97         "ramdisk_addr=fff90000\0"                                       \
  98         ""
  99
 100 #define CONFIG_PHY_ADDR         1       /* PHY address                  */
 101 #define CONFIG_HAS_ETH0
 102 #define CONFIG_HAS_ETH1
 103 #define CONFIG_PHY1_ADDR        2       /* EMAC1 PHY address            */
 104
 105 #define CONFIG_RTC_DS174x       1       /* use DS1743 RTC in Bubinga    */
 106
 107 /*
 108  * Commands additional to the ones defined in amcc-common.h
 109  */
 110 #define CONFIG_CMD_DATE
 111 #define CONFIG_CMD_PCI
 112 #define CONFIG_CMD_SDRAM
 113 #define CONFIG_CMD_SNTP
 114
 115 #define CONFIG_SPD_EEPROM      1       /* use SPD EEPROM for setup    */
 116
 117 /*
 118  * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
 119  * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
 120  * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD value.
 121  * The Linux BASE_BAUD define should match this configuration.
 122  *    baseBaud = cpuClock/(uartDivisor*16)
 123  * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
 124  * set Linux BASE_BAUD to 403200.
 125  */
 126 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 127 #undef  CONFIG_SYS_EXT_SERIAL_CLOCK           /* external serial clock */
 128 #undef  CONFIG_SYS_405_UART_ERRATA_59         /* 405GP/CR Rev. D silicon */
 129 #define CONFIG_SYS_BASE_BAUD       691200
 130
 131 /*-----------------------------------------------------------------------
 132  * I2C stuff
 133  *-----------------------------------------------------------------------
 134  */
 135 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address  */
 136
 137 #define CONFIG_SYS_I2C_NOPROBES { 0x69 }        /* avoid iprobe hangup (why?) */
 138 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   6       /* 24C02 requires 5ms delay */
 139
 140 #if defined(CONFIG_CMD_EEPROM)
 141 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50    /* I2C boot EEPROM (24C02W)     */
 142 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1       /* Bytes of address             */
 143 #endif
 144
 145 /*-----------------------------------------------------------------------
 146  * PCI stuff
 147  *-----------------------------------------------------------------------
 148  */
 149 #define PCI_HOST_ADAPTER 0              /* configure ar pci adapter     */
 150 #define PCI_HOST_FORCE  1               /* configure as pci host        */
 151 #define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
 152
 153 #define CONFIG_PCI                      /* include pci support          */
 154 #define CONFIG_PCI_HOST PCI_HOST_FORCE  /* select pci host function     */
 155 #define CONFIG_PCI_PNP                  /* do pci plug-and-play         */
 156                                         /* resource configuration       */
 157 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
 158
 159 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8   /* AMCC */
 160 #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe   /* Whatever */
 161 #define CONFIG_SYS_PCI_CLASSCODE       0x0600  /* PCI Class Code: bridge/host  */
 162 #define CONFIG_SYS_PCI_PTM1LA  0x00000000      /* point to sdram               */
 163 #define CONFIG_SYS_PCI_PTM1MS  0x80000001      /* 2GB, enable hard-wired to 1  */
 164 #define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
 165 #define CONFIG_SYS_PCI_PTM2LA  0x00000000      /* disabled                     */
 166 #define CONFIG_SYS_PCI_PTM2MS  0x00000000      /* disabled                     */
 167 #define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
 168
 169 /*-----------------------------------------------------------------------
 170  * External peripheral base address
 171  *-----------------------------------------------------------------------
 172  */
 173 #define CONFIG_SYS_KEY_REG_BASE_ADDR    0xF0100000
 174 #define CONFIG_SYS_IR_REG_BASE_ADDR     0xF0200000
 175 #define CONFIG_SYS_FPGA_REG_BASE_ADDR   0xF0300000
 176
 177 /*-----------------------------------------------------------------------
 178  * Start addresses for the final memory configuration
 179  * (Set up by the startup code)
 180  */
 181 #define CONFIG_SYS_SRAM_BASE            0xFFF00000
 182 #define CONFIG_SYS_FLASH_BASE           0xFFF80000
 183
 184 /*-----------------------------------------------------------------------
 185  * FLASH organization
 186  */
 187 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks           */
 188 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* max number of sectors on one chip    */
 189
 190 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms)      */
 191 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms)      */
 192
 193 #define CONFIG_SYS_FLASH_ADDR0         0x5555
 194 #define CONFIG_SYS_FLASH_ADDR1         0x2aaa
 195 #define CONFIG_SYS_FLASH_WORD_SIZE     unsigned char
 196
 197 #ifdef CONFIG_ENV_IS_IN_FLASH
 198 #define CONFIG_ENV_SECT_SIZE    0x10000 /* size of one complete sector  */
 199 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
 200 #define CONFIG_ENV_SIZE         0x4000  /* Total Size of Environment Sector     */
 201
 202 /* Address and size of Redundant Environment Sector     */
 203 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
 204 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 205 #endif /* CONFIG_ENV_IS_IN_FLASH */
 206
 207 /*-----------------------------------------------------------------------
 208  * NVRAM organization
 209  */
 210 #define CONFIG_SYS_NVRAM_BASE_ADDR      0xf0000000      /* NVRAM base address   */
 211 #define CONFIG_SYS_NVRAM_SIZE           0x1ff8          /* NVRAM size   */
 212
 213 #ifdef CONFIG_ENV_IS_IN_NVRAM
 214 #define CONFIG_ENV_SIZE         0x0ff8          /* Size of Environment vars     */
 215 #define CONFIG_ENV_ADDR         \
 216         (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE)      /* Env  */
 217 #endif
 218
 219 /*
 220  * Init Memory Controller:
 221  *
 222  * BR0/1 and OR0/1 (FLASH)
 223  */
 224
 225 #define FLASH_BASE0_PRELIM      CONFIG_SYS_FLASH_BASE   /* FLASH bank #0        */
 226 #define FLASH_BASE1_PRELIM      0               /* FLASH bank #1        */
 227
 228 /*-----------------------------------------------------------------------
 229  * Definitions for initial stack pointer and data area (in data cache)
 230  */
 231 /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
 232 #define CONFIG_SYS_TEMP_STACK_OCM        1
 233
 234 /* On Chip Memory location */
 235 #define CONFIG_SYS_OCM_DATA_ADDR        0xF8000000
 236 #define CONFIG_SYS_OCM_DATA_SIZE        0x1000
 237 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM             */
 238 #define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM     */
 239
 240 #define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
 241 #define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 242 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 243
 244 /*-----------------------------------------------------------------------
 245  * External Bus Controller (EBC) Setup
 246  */
 247
 248 /* Memory Bank 0 (Flash/SRAM) initialization                                    */
 249 #define CONFIG_SYS_EBC_PB0AP           0x04006000
 250 #define CONFIG_SYS_EBC_PB0CR           0xFFF18000  /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit  */
 251
 252 /* Memory Bank 1 (NVRAM/RTC) initialization                                     */
 253 #define CONFIG_SYS_EBC_PB1AP           0x04041000
 254 #define CONFIG_SYS_EBC_PB1CR           0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit  */
 255
 256 /* Memory Bank 2 (not used) initialization                                      */
 257 #define CONFIG_SYS_EBC_PB2AP           0x00000000
 258 #define CONFIG_SYS_EBC_PB2CR           0x00000000
 259
 260 /* Memory Bank 2 (not used) initialization                                      */
 261 #define CONFIG_SYS_EBC_PB3AP           0x00000000
 262 #define CONFIG_SYS_EBC_PB3CR           0x00000000
 263
 264 /* Memory Bank 4 (FPGA regs) initialization                                     */
 265 #define CONFIG_SYS_EBC_PB4AP           0x01815000
 266 #define CONFIG_SYS_EBC_PB4CR           0xF0318000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit  */
 267
 268 /*-----------------------------------------------------------------------
 269  * Definitions for Serial Presence Detect EEPROM address
 270  * (to get SDRAM settings)
 271  */
 272 #define SPD_EEPROM_ADDRESS      0x55
 273
 274 /*-----------------------------------------------------------------------
 275  * Definitions for GPIO setup (PPC405EP specific)
 276  *
 277  * GPIO0[0]     - External Bus Controller BLAST output
 278  * GPIO0[1-9]   - Instruction trace outputs
 279  * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs
 280  * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs
 281  * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
 282  * GPIO0[24-27] - UART0 control signal inputs/outputs
 283  * GPIO0[28-29] - UART1 data signal input/output
 284  * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
 285  */
 286 #define CONFIG_SYS_GPIO0_OSRH          0x55555555
 287 #define CONFIG_SYS_GPIO0_OSRL          0x40000110
 288 #define CONFIG_SYS_GPIO0_ISR1H         0x00000000
 289 #define CONFIG_SYS_GPIO0_ISR1L         0x15555445
 290 #define CONFIG_SYS_GPIO0_TSRH          0x00000000
 291 #define CONFIG_SYS_GPIO0_TSRL          0x00000000
 292 #define CONFIG_SYS_GPIO0_TCR           0xFFFF8014
 293
 294 /*-----------------------------------------------------------------------
 295  * Some BUBINGA stuff...
 296  */
 297 #define NVRAM_BASE      0xF0000000
 298 #define FPGA_REG0       0xF0300000    /* FPGA Reg 0              */
 299 #define FPGA_REG1       0xF0300001    /* FPGA Reg 1              */
 300 #define NVRVFY1     0x4f532d4f    /* used to determine if state data in */
 301 #define NVRVFY2     0x50454e00    /* NVRAM initialized (ascii for OS-OPEN)*/
 302
 303 #define FPGA_REG0_F_RANGE     0x80       /* SDRAM PLL freq range              */
 304 #define FPGA_REG0_EXT_INT_DIS 0x20       /* External interface disable        */
 305 #define FPGA_REG0_LED_MASK    0x07       /* Board LEDs DS9, DS10, and DS11    */
 306 #define FPGA_REG0_LED0        0x04       /* Turn on LED0                      */
 307 #define FPGA_REG0_LED1        0x02       /* Turn on LED1                      */
 308 #define FPGA_REG0_LED2        0x01       /* Turn on LED2                      */
 309
 310 #define FPGA_REG1_SSPEC_DIS   0x80       /* C9531 Spread Spectrum disabled    */
 311 #define FPGA_REG1_OFFBD_PCICLK 0x40      /* Onboard PCI clock selected       */
 312 #define FPGA_REG1_CLOCK_MASK  0x30       /* Mask for C9531 output freq select */
 313 #define FPGA_REG1_CLOCK_BIT_SHIFT  4
 314 #define FPGA_REG1_PCI_INT_ARB 0x08       /* PCI Internal arbiter selected     */
 315 #define FPGA_REG1_PCI_FREQ    0x04       /* PCI Frequency select              */
 316 #define FPGA_REG1_OFFB_FLASH  0x02       /* Off board flash                   */
 317 #define FPGA_REG1_SRAM_BOOT   0x01       /* SRAM at 0xFFF80000 not Flash      */
 318
 319 #endif  /* __CONFIG_H */