include/configs/canyonlands.h

   1 /*
   2  * (C) Copyright 2008
   3  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /************************************************************************
   9  * canyonlands.h - configuration for Canyonlands (460EX)
  10  ***********************************************************************/
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 /*-----------------------------------------------------------------------
  15  * High Level Configuration Options
  16  *----------------------------------------------------------------------*/
  17 /*
  18  * This config file is used for Canyonlands (460EX) Glacier (460GT)
  19  * and Arches dual (460GT)
  20  */
  21 #ifdef CONFIG_CANYONLANDS
  22 #define CONFIG_460EX            1       /* Specific PPC460EX            */
  23 #define CONFIG_HOSTNAME         canyonlands
  24 #else
  25 #define CONFIG_460GT            1       /* Specific PPC460GT            */
  26 #ifdef CONFIG_GLACIER
  27 #define CONFIG_HOSTNAME         glacier
  28 #else
  29 #define CONFIG_HOSTNAME         arches
  30 #define CONFIG_USE_NETDEV       eth1
  31 #define CONFIG_BD_NUM_CPUS      2
  32 #endif
  33 #endif
  34
  35 #define CONFIG_440              1
  36
  37 #ifndef CONFIG_SYS_TEXT_BASE
  38 #define CONFIG_SYS_TEXT_BASE    0xFFF80000
  39 #endif
  40
  41 /*
  42  * Include common defines/options for all AMCC eval boards
  43  */
  44 #include "amcc-common.h"
  45
  46 #define CONFIG_SYS_CLK_FREQ     66666667        /* external freq to pll */
  47
  48 #define CONFIG_BOARD_EARLY_INIT_F       1       /* Call board_early_init_f */
  49 #define CONFIG_BOARD_EARLY_INIT_R       1       /* Call board_early_init_r */
  50 #define CONFIG_MISC_INIT_R              1       /* Call misc_init_r */
  51 #define CONFIG_BOARD_TYPES              1       /* support board types */
  52
  53 /*-----------------------------------------------------------------------
  54  * Base addresses -- Note these are effective addresses where the
  55  * actual resources get mapped (not physical addresses)
  56  *----------------------------------------------------------------------*/
  57 #define CONFIG_SYS_PCI_MEMBASE          0x80000000      /* mapped PCI memory    */
  58 #define CONFIG_SYS_PCI_BASE             0xd0000000      /* internal PCI regs    */
  59 #define CONFIG_SYS_PCI_TARGBASE CONFIG_SYS_PCI_MEMBASE
  60
  61 #define CONFIG_SYS_PCIE_MEMBASE 0xb0000000      /* mapped PCIe memory   */
  62 #define CONFIG_SYS_PCIE_MEMSIZE 0x08000000      /* smallest incr for PCIe port */
  63 #define CONFIG_SYS_PCIE_BASE            0xc4000000      /* PCIe UTL regs */
  64
  65 #define CONFIG_SYS_PCIE0_CFGBASE        0xc0000000
  66 #define CONFIG_SYS_PCIE1_CFGBASE        0xc1000000
  67 #define CONFIG_SYS_PCIE0_XCFGBASE       0xc3000000
  68 #define CONFIG_SYS_PCIE1_XCFGBASE       0xc3001000
  69
  70 /*
  71  * BCSR bits as defined in the Canyonlands board user manual.
  72  */
  73 #define BCSR_USBCTRL_OTG_RST    0x32
  74 #define BCSR_USBCTRL_HOST_RST   0x01
  75 #define BCSR_SELECT_PCIE        0x10
  76
  77 #define CONFIG_SYS_PCIE0_UTLBASE        0xc08010000ULL  /* 36bit physical addr  */
  78
  79 /* base address of inbound PCIe window */
  80 #define CONFIG_SYS_PCIE_INBOUND_BASE    0x000000000ULL  /* 36bit physical addr  */
  81
  82 /* EBC stuff */
  83 #if !defined(CONFIG_ARCHES)
  84 #define CONFIG_SYS_BCSR_BASE            0xE1000000
  85 #define CONFIG_SYS_FLASH_BASE           0xFC000000      /* later mapped to this addr */
  86 #define CONFIG_SYS_FLASH_SIZE           (64 << 20)
  87 #else
  88 #define CONFIG_SYS_FPGA_BASE            0xE1000000
  89 #define CONFIG_SYS_CPLD_ADDR            (CONFIG_SYS_FPGA_BASE + 0x00080000)
  90 #define CONFIG_SYS_CPLD_DATA            (CONFIG_SYS_FPGA_BASE + 0x00080002)
  91 #define CONFIG_SYS_FLASH_BASE           0xFE000000      /* later mapped to this addr  */
  92 #define CONFIG_SYS_FLASH_SIZE           (32 << 20)
  93 #endif
  94
  95 #define CONFIG_SYS_NAND_ADDR            0xE0000000
  96 #define CONFIG_SYS_BOOT_BASE_ADDR       0xFF000000      /* EBC Boot Space: 0xFF000000 */
  97 #define CONFIG_SYS_FLASH_BASE_PHYS_H    0x4
  98 #define CONFIG_SYS_FLASH_BASE_PHYS_L    0xCC000000
  99 #define CONFIG_SYS_FLASH_BASE_PHYS      (((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) |    \
 100                                          (u64)CONFIG_SYS_FLASH_BASE_PHYS_L)
 101
 102 #define CONFIG_SYS_OCM_BASE             0xE3000000      /* OCM: 64k             */
 103 #define CONFIG_SYS_SRAM_BASE            0xE8000000      /* SRAM: 256k           */
 104 #define CONFIG_SYS_SRAM_SIZE            (256 << 10)
 105 #define CONFIG_SYS_LOCAL_CONF_REGS      0xEF000000
 106
 107 #define CONFIG_SYS_AHB_BASE             0xE2000000      /* internal AHB peripherals     */
 108
 109 /*-----------------------------------------------------------------------
 110  * Initial RAM & stack pointer (placed in OCM)
 111  *----------------------------------------------------------------------*/
 112 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_OCM_BASE     /* OCM                  */
 113 #define CONFIG_SYS_INIT_RAM_SIZE        (4 << 10)
 114 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 115 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 116
 117 /*-----------------------------------------------------------------------
 118  * Serial Port
 119  *----------------------------------------------------------------------*/
 120 #define CONFIG_CONS_INDEX       1       /* Use UART0                    */
 121
 122 /*-----------------------------------------------------------------------
 123  * Environment
 124  *----------------------------------------------------------------------*/
 125 /*
 126  * Define here the location of the environment variables (FLASH).
 127  */
 128 #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
 129 #define CONFIG_ENV_IS_IN_FLASH  1       /* use FLASH for environment vars */
 130 #define CONFIG_SYS_NOR_CS               0       /* NOR chip connected to CSx */
 131 #define CONFIG_SYS_NAND_CS              3       /* NAND chip connected to CSx */
 132 #else
 133 #define CONFIG_ENV_IS_IN_NAND   1       /* use NAND for environment vars  */
 134 #define CONFIG_SYS_NOR_CS               3       /* NOR chip connected to CSx */
 135 #define CONFIG_SYS_NAND_CS              0       /* NAND chip connected to CSx */
 136 #define CONFIG_ENV_IS_EMBEDDED  1       /* use embedded environment */
 137 #endif
 138
 139 /*
 140  * IPL (Initial Program Loader, integrated inside CPU)
 141  * Will load first 4k from NAND (SPL) into cache and execute it from there.
 142  *
 143  * SPL (Secondary Program Loader)
 144  * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
 145  * has to fit into 4kByte. It sets up the CPU and configures the SDRAM
 146  * controller and the NAND controller so that the special U-Boot image can be
 147  * loaded from NAND to SDRAM.
 148  *
 149  * NUB (NAND U-Boot)
 150  * This NAND U-Boot (NUB) is a special U-Boot version which can be started
 151  * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
 152  *
 153  * On 440EPx the SPL is copied to SDRAM before the NAND controller is
 154  * set up. While still running from cache, I experienced problems accessing
 155  * the NAND controller. sr - 2006-08-25
 156  *
 157  * This is the first official implementation of booting from 2k page sized
 158  * NAND devices (e.g. Micron 29F2G08AA 256Mbit * 8)
 159  */
 160 #define CONFIG_SYS_NAND_BOOT_SPL_SRC    0xfffff000      /* SPL location               */
 161 #define CONFIG_SYS_NAND_BOOT_SPL_SIZE   (4 << 10)       /* SPL size                   */
 162 #define CONFIG_SYS_NAND_BOOT_SPL_DST    (CONFIG_SYS_OCM_BASE + (12 << 10)) /* Copy SPL here  */
 163 #define CONFIG_SYS_NAND_U_BOOT_DST      0x01000000      /* Load NUB to this addr      */
 164 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_NAND_U_BOOT_DST      /* Start NUB from     */
 165                                                         /*   this addr        */
 166 #define CONFIG_SYS_NAND_BOOT_SPL_DELTA  (CONFIG_SYS_NAND_BOOT_SPL_SRC - CONFIG_SYS_NAND_BOOT_SPL_DST)
 167
 168 /*
 169  * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
 170  */
 171 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (128 << 10)     /* Offset to RAM U-Boot image */
 172 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (1 << 20)       /* Size of RAM U-Boot image   */
 173
 174 /*
 175  * Now the NAND chip has to be defined (no autodetection used!)
 176  */
 177 #define CONFIG_SYS_NAND_PAGE_SIZE       (2 << 10)       /* NAND chip page size        */
 178 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 << 10)     /* NAND chip block size       */
 179 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / CONFIG_SYS_NAND_PAGE_SIZE)
 180                                                 /* NAND chip page count       */
 181 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0               /* Location of bad block marker*/
 182 #define CONFIG_SYS_NAND_5_ADDR_CYCLE                    /* Fifth addr used (<=128MB)  */
 183
 184 #define CONFIG_SYS_NAND_ECCSIZE 256
 185 #define CONFIG_SYS_NAND_ECCBYTES        3
 186 #define CONFIG_SYS_NAND_OOBSIZE 64
 187 #define CONFIG_SYS_NAND_ECCPOS          {40, 41, 42, 43, 44, 45, 46, 47, \
 188                                  48, 49, 50, 51, 52, 53, 54, 55, \
 189                                  56, 57, 58, 59, 60, 61, 62, 63}
 190
 191 #ifdef CONFIG_ENV_IS_IN_NAND
 192 /*
 193  * For NAND booting the environment is embedded in the U-Boot image. Please take
 194  * look at the file board/amcc/canyonlands/u-boot-nand.lds for details.
 195  */
 196 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 197 #define CONFIG_ENV_OFFSET               (CONFIG_SYS_NAND_U_BOOT_OFFS + CONFIG_ENV_SIZE)
 198 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 199 #endif
 200
 201 /*-----------------------------------------------------------------------
 202  * FLASH related
 203  *----------------------------------------------------------------------*/
 204 #define CONFIG_SYS_FLASH_CFI                    /* The flash is CFI compatible  */
 205 #define CONFIG_FLASH_CFI_DRIVER         /* Use common CFI driver        */
 206 #define CONFIG_SYS_FLASH_CFI_AMD_RESET  1       /* Use AMD (Spansion) reset cmd */
 207
 208 #define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
 209 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks           */
 210 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* max number of sectors on one chip    */
 211
 212 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms)      */
 213 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms)      */
 214
 215 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1     /* use buffered writes (20x faster)     */
 216 #define CONFIG_SYS_FLASH_EMPTY_INFO             /* print 'E' for empty sector on flinfo */
 217
 218 #ifdef CONFIG_ENV_IS_IN_FLASH
 219 #define CONFIG_ENV_SECT_SIZE    0x20000         /* size of one complete sector  */
 220 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 221 #define CONFIG_ENV_SIZE         0x4000  /* Total Size of Environment Sector     */
 222
 223 /* Address and size of Redundant Environment Sector     */
 224 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
 225 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 226 #endif /* CONFIG_ENV_IS_IN_FLASH */
 227
 228 /*-----------------------------------------------------------------------
 229  * NAND-FLASH related
 230  *----------------------------------------------------------------------*/
 231 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 232 #define CONFIG_SYS_NAND_BASE            (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
 233 #define CONFIG_SYS_NAND_SELECT_DEVICE  1        /* nand driver supports mutipl. chips   */
 234
 235 /*------------------------------------------------------------------------------
 236  * DDR SDRAM
 237  *----------------------------------------------------------------------------*/
 238 #if !defined(CONFIG_NAND_U_BOOT)
 239 #if !defined(CONFIG_ARCHES)
 240 /*
 241  * NAND booting U-Boot version uses a fixed initialization, since the whole
 242  * I2C SPD DIMM autodetection/calibration doesn't fit into the 4k of boot
 243  * code.
 244  */
 245 #define CONFIG_SPD_EEPROM       1       /* Use SPD EEPROM for setup     */
 246 #define SPD_EEPROM_ADDRESS      {0x50, 0x51}    /* SPD i2c spd addresses*/
 247 #define CONFIG_DDR_ECC          1       /* with ECC support             */
 248 #define CONFIG_DDR_RQDC_FIXED   0x80000038 /* fixed value for RQDC      */
 249
 250 #else /* defined(CONFIG_ARCHES) */
 251
 252 #define CONFIG_AUTOCALIB        "silent\0"      /* default is non-verbose    */
 253
 254 #define CONFIG_PPC4xx_DDR_AUTOCALIBRATION       /* IBM DDR autocalibration   */
 255 #define DEBUG_PPC4xx_DDR_AUTOCALIBRATION        /* dynamic DDR autocal debug */
 256 #undef CONFIG_PPC4xx_DDR_METHOD_A
 257
 258 /* DDR1/2 SDRAM Device Control Register Data Values */
 259 /* Memory Queue */
 260 #define CONFIG_SYS_SDRAM_R0BAS          0x0000f000
 261 #define CONFIG_SYS_SDRAM_R1BAS          0x00000000
 262 #define CONFIG_SYS_SDRAM_R2BAS          0x00000000
 263 #define CONFIG_SYS_SDRAM_R3BAS          0x00000000
 264 #define CONFIG_SYS_SDRAM_PLBADDULL      0x00000000
 265 #define CONFIG_SYS_SDRAM_PLBADDUHB      0x00000008
 266 #define CONFIG_SYS_SDRAM_CONF1LL        0x00001080
 267 #define CONFIG_SYS_SDRAM_CONF1HB        0x00001080
 268 #define CONFIG_SYS_SDRAM_CONFPATHB      0x10a68000
 269
 270 /* SDRAM Controller */
 271 #define CONFIG_SYS_SDRAM0_MB0CF         0x00000701
 272 #define CONFIG_SYS_SDRAM0_MB1CF         0x00000000
 273 #define CONFIG_SYS_SDRAM0_MB2CF         0x00000000
 274 #define CONFIG_SYS_SDRAM0_MB3CF         0x00000000
 275 #define CONFIG_SYS_SDRAM0_MCOPT1        0x05322000
 276 #define CONFIG_SYS_SDRAM0_MCOPT2        0x00000000
 277 #define CONFIG_SYS_SDRAM0_MODT0         0x01000000
 278 #define CONFIG_SYS_SDRAM0_MODT1         0x00000000
 279 #define CONFIG_SYS_SDRAM0_MODT2         0x00000000
 280 #define CONFIG_SYS_SDRAM0_MODT3         0x00000000
 281 #define CONFIG_SYS_SDRAM0_CODT          0x00800021
 282 #define CONFIG_SYS_SDRAM0_RTR           0x06180000
 283 #define CONFIG_SYS_SDRAM0_INITPLR0      0xb5380000
 284 #define CONFIG_SYS_SDRAM0_INITPLR1      0x82100400
 285 #define CONFIG_SYS_SDRAM0_INITPLR2      0x80820000
 286 #define CONFIG_SYS_SDRAM0_INITPLR3      0x80830000
 287 #define CONFIG_SYS_SDRAM0_INITPLR4      0x80810040
 288 #define CONFIG_SYS_SDRAM0_INITPLR5      0x80800532
 289 #define CONFIG_SYS_SDRAM0_INITPLR6      0x82100400
 290 #define CONFIG_SYS_SDRAM0_INITPLR7      0x8a080000
 291 #define CONFIG_SYS_SDRAM0_INITPLR8      0x8a080000
 292 #define CONFIG_SYS_SDRAM0_INITPLR9      0x8a080000
 293 #define CONFIG_SYS_SDRAM0_INITPLR10     0x8a080000
 294 #define CONFIG_SYS_SDRAM0_INITPLR11     0x80000432
 295 #define CONFIG_SYS_SDRAM0_INITPLR12     0x808103c0
 296 #define CONFIG_SYS_SDRAM0_INITPLR13     0x80810040
 297 #define CONFIG_SYS_SDRAM0_INITPLR14     0x00000000
 298 #define CONFIG_SYS_SDRAM0_INITPLR15     0x00000000
 299 #define CONFIG_SYS_SDRAM0_RQDC          0x80000038
 300 #define CONFIG_SYS_SDRAM0_RFDC          0x00000257
 301 #define CONFIG_SYS_SDRAM0_RDCC          0x40000000
 302 #define CONFIG_SYS_SDRAM0_DLCR          0x03000091
 303 #define CONFIG_SYS_SDRAM0_CLKTR         0x40000000
 304 #define CONFIG_SYS_SDRAM0_WRDTR         0x82000823
 305 #define CONFIG_SYS_SDRAM0_SDTR1         0x80201000
 306 #define CONFIG_SYS_SDRAM0_SDTR2         0x42204243
 307 #define CONFIG_SYS_SDRAM0_SDTR3         0x090c0d1a
 308 #define CONFIG_SYS_SDRAM0_MMODE         0x00000432
 309 #define CONFIG_SYS_SDRAM0_MEMODE        0x00000004
 310 #endif  /* !defined(CONFIG_ARCHES) */
 311 #endif  /* !defined(CONFIG_NAND_U_BOOT) */
 312
 313 #define CONFIG_SYS_MBYTES_SDRAM 512     /* 512MB                        */
 314
 315 /*-----------------------------------------------------------------------
 316  * I2C
 317  *----------------------------------------------------------------------*/
 318 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0           400000
 319
 320 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 321 #define CONFIG_SYS_I2C_EEPROM_ADDR              (0xa8>>1)
 322 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 323 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 324 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10
 325
 326 /* I2C bootstrap EEPROM */
 327 #if defined(CONFIG_ARCHES)
 328 #define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR       0x54
 329 #else
 330 #define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR       0x52
 331 #endif
 332 #define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET     0
 333 #define CONFIG_4xx_CONFIG_BLOCKSIZE             16
 334
 335 /* I2C SYSMON (LM75, AD7414 is almost compatible)                       */
 336 #define CONFIG_DTT_LM75         1               /* ON Semi's LM75       */
 337 #define CONFIG_DTT_AD7414       1               /* use AD7414           */
 338 #define CONFIG_DTT_SENSORS      {0}             /* Sensor addresses     */
 339 #define CONFIG_SYS_DTT_MAX_TEMP 70
 340 #define CONFIG_SYS_DTT_LOW_TEMP -30
 341 #define CONFIG_SYS_DTT_HYSTERESIS       3
 342
 343 #if defined(CONFIG_ARCHES)
 344 #define CONFIG_SYS_I2C_DTT_ADDR 0x4a            /* AD7414 I2C address   */
 345 #endif
 346
 347 #if !defined(CONFIG_ARCHES)
 348 /* RTC configuration */
 349 #define CONFIG_RTC_M41T62       1
 350 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 351 #endif
 352
 353 /*-----------------------------------------------------------------------
 354  * Ethernet
 355  *----------------------------------------------------------------------*/
 356 #define CONFIG_IBM_EMAC4_V4     1
 357
 358 #define CONFIG_HAS_ETH0
 359 #define CONFIG_HAS_ETH1
 360
 361 #if !defined(CONFIG_ARCHES)
 362 #define CONFIG_PHY_ADDR         0       /* PHY address, See schematics  */
 363 #define CONFIG_PHY1_ADDR        1
 364 /* Only Glacier (460GT) has 4 EMAC interfaces */
 365 #ifdef CONFIG_460GT
 366 #define CONFIG_PHY2_ADDR        2
 367 #define CONFIG_PHY3_ADDR        3
 368 #define CONFIG_HAS_ETH2
 369 #define CONFIG_HAS_ETH3
 370 #endif
 371
 372 #else /* defined(CONFIG_ARCHES) */
 373
 374 #define CONFIG_FIXED_PHY        0xFFFFFFFF
 375 #define CONFIG_PHY_ADDR         CONFIG_FIXED_PHY
 376 #define CONFIG_PHY1_ADDR        0
 377 #define CONFIG_PHY2_ADDR        1
 378 #define CONFIG_HAS_ETH2
 379
 380 #define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \
 381                 {devnum, speed, duplex}
 382 #define CONFIG_SYS_FIXED_PHY_PORTS \
 383                 CONFIG_SYS_FIXED_PHY_PORT(0, 1000, FULL)
 384
 385 #define CONFIG_M88E1112_PHY
 386
 387 /*
 388  * For the GPCS_PHYx_ADDR PHY address, choose some PHY address not
 389  * used by CONFIG_PHYx_ADDR
 390  */
 391 #define CONFIG_GPCS_PHY_ADDR    0xA
 392 #define CONFIG_GPCS_PHY1_ADDR   0xB
 393 #define CONFIG_GPCS_PHY2_ADDR   0xC
 394 #endif  /* !defined(CONFIG_ARCHES) */
 395
 396 #define CONFIG_PHY_RESET        1       /* reset phy upon startup       */
 397 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 398 #define CONFIG_PHY_DYNAMIC_ANEG 1
 399
 400 /*-----------------------------------------------------------------------
 401  * USB-OHCI
 402  *----------------------------------------------------------------------*/
 403 /* Only Canyonlands (460EX) has USB */
 404 #ifdef CONFIG_460EX
 405 #define CONFIG_USB_OHCI_NEW
 406 #define CONFIG_USB_STORAGE
 407 #undef CONFIG_SYS_OHCI_BE_CONTROLLER            /* 460EX has little endian descriptors  */
 408 #define CONFIG_SYS_OHCI_SWAP_REG_ACCESS /* 460EX has little endian register     */
 409 #define CONFIG_SYS_OHCI_USE_NPS         /* force NoPowerSwitching mode          */
 410 #define CONFIG_SYS_USB_OHCI_REGS_BASE   (CONFIG_SYS_AHB_BASE | 0xd0000)
 411 #define CONFIG_SYS_USB_OHCI_SLOT_NAME   "ppc440"
 412 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
 413 #define CONFIG_SYS_USB_OHCI_BOARD_INIT
 414 #endif
 415
 416 /*
 417  * Default environment variables
 418  */
 419 #if !defined(CONFIG_ARCHES)
 420 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 421         CONFIG_AMCC_DEF_ENV                                             \
 422         CONFIG_AMCC_DEF_ENV_POWERPC                                     \
 423         CONFIG_AMCC_DEF_ENV_NOR_UPD                                     \
 424         CONFIG_AMCC_DEF_ENV_NAND_UPD                                    \
 425         "kernel_addr=fc000000\0"                                        \
 426         "fdt_addr=fc1e0000\0"                                           \
 427         "ramdisk_addr=fc200000\0"                                       \
 428         "pciconfighost=1\0"                                             \
 429         "pcie_mode=RP:RP\0"                                             \
 430         ""
 431 #else /* defined(CONFIG_ARCHES) */
 432 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 433         CONFIG_AMCC_DEF_ENV                                             \
 434         CONFIG_AMCC_DEF_ENV_POWERPC                                     \
 435         CONFIG_AMCC_DEF_ENV_NOR_UPD                                     \
 436         "kernel_addr=fe000000\0"                                        \
 437         "fdt_addr=fe1e0000\0"                                           \
 438         "ramdisk_addr=fe200000\0"                                       \
 439         "pciconfighost=1\0"                                             \
 440         "pcie_mode=RP:RP\0"                                             \
 441         "ethprime=ppc_4xx_eth1\0"                                       \
 442         ""
 443 #endif  /* !defined(CONFIG_ARCHES) */
 444
 445 /*
 446  * Commands additional to the ones defined in amcc-common.h
 447  */
 448 #define CONFIG_CMD_CHIP_CONFIG
 449 #if defined(CONFIG_ARCHES)
 450 #define CONFIG_CMD_DTT
 451 #define CONFIG_CMD_PCI
 452 #define CONFIG_CMD_SDRAM
 453 #elif defined(CONFIG_CANYONLANDS)
 454 #define CONFIG_CMD_DATE
 455 #define CONFIG_CMD_DTT
 456 #define CONFIG_CMD_EXT2
 457 #define CONFIG_CMD_FAT
 458 #define CONFIG_CMD_NAND
 459 #define CONFIG_CMD_PCI
 460 #define CONFIG_CMD_SATA
 461 #define CONFIG_CMD_SDRAM
 462 #define CONFIG_CMD_SNTP
 463 #define CONFIG_CMD_USB
 464 #elif defined(CONFIG_GLACIER)
 465 #define CONFIG_CMD_DATE
 466 #define CONFIG_CMD_DTT
 467 #define CONFIG_CMD_NAND
 468 #define CONFIG_CMD_PCI
 469 #define CONFIG_CMD_SDRAM
 470 #define CONFIG_CMD_SNTP
 471 #else
 472 #error "board type not defined"
 473 #endif
 474
 475 /* Partitions */
 476 #define CONFIG_MAC_PARTITION
 477 #define CONFIG_DOS_PARTITION
 478 #define CONFIG_ISO_PARTITION
 479
 480 /*-----------------------------------------------------------------------
 481  * PCI stuff
 482  *----------------------------------------------------------------------*/
 483 /* General PCI */
 484 #define CONFIG_PCI                      /* include pci support          */
 485 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
 486 #define CONFIG_PCI_PNP                  /* do pci plug-and-play   */
 487 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
 488 #define CONFIG_PCI_CONFIG_HOST_BRIDGE
 489
 490 /* Board-specific PCI */
 491 #define CONFIG_SYS_PCI_TARGET_INIT              /* let board init pci target    */
 492 #undef  CONFIG_SYS_PCI_MASTER_INIT
 493
 494 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014   /* IBM                          */
 495 #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe   /* Whatever                     */
 496
 497 #ifdef CONFIG_460GT
 498 #if defined(CONFIG_ARCHES)
 499 /*-----------------------------------------------------------------------
 500  * RapidIO I/O and Registers
 501  *----------------------------------------------------------------------*/
 502 #define CONFIG_RAPIDIO
 503 #define CONFIG_SYS_460GT_SRIO_ERRATA_1
 504
 505 #define SRGPL0_REG_BAR          0x0000000DAA000000ull   /*  16MB */
 506 #define SRGPL0_CFG_BAR          0x0000000DAB000000ull   /*  16MB */
 507 #define SRGPL0_MNT_BAR          0x0000000DAC000000ull   /*  16MB */
 508 #define SRGPL0_MSG_BAR          0x0000000DAD000000ull   /*  16MB */
 509 #define SRGPL0_OUT_BAR          0x0000000DB0000000ull   /* 256MB */
 510
 511 #define CONFIG_SYS_SRGPL0_REG_BAR       0xAA000000              /*  16MB */
 512 #define CONFIG_SYS_SRGPL0_CFG_BAR       0xAB000000              /*  16MB */
 513 #define CONFIG_SYS_SRGPL0_MNT_BAR       0xAC000000              /*  16MB */
 514 #define CONFIG_SYS_SRGPL0_MSG_BAR       0xAD000000              /*  16MB */
 515
 516 #define CONFIG_SYS_I2ODMA_BASE          0xCF000000
 517 #define CONFIG_SYS_I2ODMA_PHYS_ADDR     0x0000000400100000ull
 518
 519 #define CONFIG_PPC4XX_RAPIDIO_PROMISCUOUS_MODE
 520 #undef CONFIG_PPC4XX_RAPIDIO_DEBUG
 521 #undef CONFIG_PPC4XX_RAPIDIO_IN_BAR_USE_OCM
 522 #define CONFIG_PPC4XX_RAPIDIO_USE_HB_PLB
 523 #undef CONFIG_PPC4XX_RAPIDIO_LOOPBACK
 524 #endif /* CONFIG_ARCHES */
 525 #endif /* CONFIG_460GT */
 526
 527 /*
 528  * SATA driver setup
 529  */
 530 #ifdef CONFIG_CMD_SATA
 531 #define CONFIG_SATA_DWC
 532 #define CONFIG_LIBATA
 533 #define SATA_BASE_ADDR          0xe20d1000      /* PPC460EX SATA Base Address */
 534 #define SATA_DMA_REG_ADDR       0xe20d0800      /* PPC460EX SATA Base Address */
 535 #define CONFIG_SYS_SATA_MAX_DEVICE      1       /* SATA MAX DEVICE */
 536 /* Convert sectorsize to wordsize */
 537 #define ATA_SECTOR_WORDS (ATA_SECT_SIZE/2)
 538 #endif
 539
 540 /*-----------------------------------------------------------------------
 541  * External Bus Controller (EBC) Setup
 542  *----------------------------------------------------------------------*/
 543
 544 /*
 545  * Canyonlands has 64MBytes of NOR FLASH (Spansion 29GL512), but the
 546  * boot EBC mapping only supports a maximum of 16MBytes
 547  * (4.ff00.0000 - 4.ffff.ffff).
 548  * To solve this problem, the FLASH has to get remapped to another
 549  * EBC address which accepts bigger regions:
 550  *
 551  * 0xfc00.0000 -> 4.cc00.0000
 552  *
 553  * Arches has 32MBytes of NOR FLASH (Spansion 29GL256), it will be
 554  * remapped to:
 555  *
 556  * 0xfe00.0000 -> 4.ce00.0000
 557  */
 558
 559 #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
 560 /* Memory Bank 3 (NOR-FLASH) initialization                                     */
 561 #define CONFIG_SYS_EBC_PB3AP            0x10055e00
 562 #define CONFIG_SYS_EBC_PB3CR            (CONFIG_SYS_BOOT_BASE_ADDR | 0x9a000)
 563
 564 /* Memory Bank 0 (NAND-FLASH) initialization                                            */
 565 #define CONFIG_SYS_EBC_PB0AP            0x018003c0
 566 #define CONFIG_SYS_EBC_PB0CR            (CONFIG_SYS_NAND_ADDR | 0x1E000) /* BAS=NAND,BS=1MB,BU=R/W,BW=32bit*/
 567 #else
 568 /* Memory Bank 0 (NOR-FLASH) initialization                                     */
 569 #define CONFIG_SYS_EBC_PB0AP            0x10055e00
 570 #define CONFIG_SYS_EBC_PB0CR            (CONFIG_SYS_BOOT_BASE_ADDR | 0x9a000)
 571
 572 #if !defined(CONFIG_ARCHES)
 573 /* Memory Bank 3 (NAND-FLASH) initialization                                            */
 574 #define CONFIG_SYS_EBC_PB3AP            0x018003c0
 575 #define CONFIG_SYS_EBC_PB3CR            (CONFIG_SYS_NAND_ADDR | 0x1E000) /* BAS=NAND,BS=1MB,BU=R/W,BW=32bit*/
 576 #endif
 577 #endif  /*defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
 578
 579 #if !defined(CONFIG_ARCHES)
 580 /* Memory Bank 2 (CPLD) initialization                                          */
 581 #define CONFIG_SYS_EBC_PB2AP            0x00804240
 582 #define CONFIG_SYS_EBC_PB2CR            (CONFIG_SYS_BCSR_BASE | 0x18000) /* BAS=CPLD,BS=1M,BU=RW,BW=32bit */
 583
 584 #else /* defined(CONFIG_ARCHES) */
 585
 586 /* Memory Bank 1 (FPGA) initialization  */
 587 #define CONFIG_SYS_EBC_PB1AP            0x7f8ffe80
 588 #define CONFIG_SYS_EBC_PB1CR            (CONFIG_SYS_FPGA_BASE | 0x3a000) /* BAS=FPGA,BS=2MB,BU=R/W,BW=16bit*/
 589 #endif  /* !defined(CONFIG_ARCHES) */
 590
 591 #define CONFIG_SYS_EBC_CFG              0xbfc00000
 592
 593 /*
 594  * Arches doesn't use PerCS3 but GPIO43, so let's configure the GPIO
 595  * pin multiplexing correctly
 596  */
 597 #if defined(CONFIG_ARCHES)
 598 #define GPIO43_USE              GPIO_SEL        /* On Arches this pin is used as GPIO */
 599 #else
 600 #define GPIO43_USE              GPIO_ALT1       /* On Glacier this pin is used as ALT1 -> PerCS3 */
 601 #endif
 602
 603 /*
 604  * PPC4xx GPIO Configuration
 605  */
 606 #ifdef CONFIG_460EX
 607 /* 460EX: Use USB configuration */
 608 #define CONFIG_SYS_4xx_GPIO_TABLE { /*    Out             GPIO  Alternate1      Alternate2      Alternate3 */ \
 609 {                                                                                       \
 610 /* GPIO Core 0 */                                                                       \
 611 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 GMC1TxD(0)      USB2HostD(0)    */      \
 612 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 GMC1TxD(1)      USB2HostD(1)    */      \
 613 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 GMC1TxD(2)      USB2HostD(2)    */      \
 614 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 GMC1TxD(3)      USB2HostD(3)    */      \
 615 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 GMC1TxD(4)      USB2HostD(4)    */      \
 616 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 GMC1TxD(5)      USB2HostD(5)    */      \
 617 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 GMC1TxD(6)      USB2HostD(6)    */      \
 618 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 GMC1TxD(7)      USB2HostD(7)    */      \
 619 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 GMC1RxD(0)      USB2OTGD(0)     */      \
 620 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 GMC1RxD(1)      USB2OTGD(1)     */      \
 621 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 GMC1RxD(2)     USB2OTGD(2)     */      \
 622 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 GMC1RxD(3)     USB2OTGD(3)     */      \
 623 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO12 GMC1RxD(4)     USB2OTGD(4)     */      \
 624 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO13 GMC1RxD(5)     USB2OTGD(5)     */      \
 625 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO14 GMC1RxD(6)     USB2OTGD(6)     */      \
 626 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO15 GMC1RxD(7)     USB2OTGD(7)     */      \
 627 {GPIO0_BASE, GPIO_IN , GPIO_SEL,  GPIO_OUT_0}, /* GPIO16 GMC1TxER       USB2HostStop    */      \
 628 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMC1CD         USB2HostNext    */      \
 629 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMC1RxER       USB2HostDir     */      \
 630 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO19 GMC1TxEN       USB2OTGStop     */      \
 631 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 GMC1CRS        USB2OTGNext     */      \
 632 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 GMC1RxDV       USB2OTGDir      */      \
 633 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO22 NFRDY                          */      \
 634 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 NFREN                          */      \
 635 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 NFWEN                          */      \
 636 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 NFCLE                          */      \
 637 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 NFALE                          */      \
 638 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO27 IRQ(0)                         */      \
 639 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO28 IRQ(1)                         */      \
 640 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO29 IRQ(2)                         */      \
 641 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO30 PerPar0        DMAReq2         IRQ(7)*/ \
 642 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO31 PerPar1        DMAAck2         IRQ(8)*/ \
 643 },                                                                                      \
 644 {                                                                                       \
 645 /* GPIO Core 1 */                                                                       \
 646 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 PerPar2        EOT2/TC2        IRQ(9)*/ \
 647 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 PerPar3        DMAReq3         IRQ(4)*/ \
 648 {GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N    UART1_DSR_CTS_N UART2_SOUT*/ \
 649 {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
 650 {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N DMAAck3       UART3_SIN*/ \
 651 {GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N    EOT3/TC3        UART3_SOUT*/ \
 652 {GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N    UART1_SOUT      */      \
 653 {GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N     UART1_SIN       */      \
 654 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 IRQ(3)                         */      \
 655 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 CS(1)                          */      \
 656 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 CS(2)                          */      \
 657 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 CS(3)          DMAReq1         IRQ(10)*/ \
 658 {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO44 CS(4)          DMAAck1         IRQ(11)*/ \
 659 {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO45 CS(5)          EOT/TC1         IRQ(12)*/ \
 660 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 PerAddr(5)     DMAReq0         IRQ(13)*/ \
 661 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 PerAddr(6)     DMAAck0         IRQ(14)*/ \
 662 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 PerAddr(7)     EOT/TC0         IRQ(15)*/ \
 663 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49  Unselect via TraceSelect Bit  */      \
 664 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50  Unselect via TraceSelect Bit  */      \
 665 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51  Unselect via TraceSelect Bit  */      \
 666 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52  Unselect via TraceSelect Bit  */      \
 667 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53  Unselect via TraceSelect Bit  */      \
 668 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54  Unselect via TraceSelect Bit  */      \
 669 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55  Unselect via TraceSelect Bit  */      \
 670 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56  Unselect via TraceSelect Bit  */      \
 671 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57  Unselect via TraceSelect Bit  */      \
 672 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58  Unselect via TraceSelect Bit  */      \
 673 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59  Unselect via TraceSelect Bit  */      \
 674 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60  Unselect via TraceSelect Bit  */      \
 675 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61  Unselect via TraceSelect Bit  */      \
 676 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62  Unselect via TraceSelect Bit  */      \
 677 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63  Unselect via TraceSelect Bit  */      \
 678 }                                                                                       \
 679 }
 680 #else
 681 /* 460GT: Use EMAC2+3 configuration */
 682 #define CONFIG_SYS_4xx_GPIO_TABLE { /*    Out             GPIO  Alternate1      Alternate2      Alternate3 */ \
 683 {                                                                                       \
 684 /* GPIO Core 0 */                                                                       \
 685 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 GMC1TxD(0)      USB2HostD(0)    */      \
 686 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 GMC1TxD(1)      USB2HostD(1)    */      \
 687 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 GMC1TxD(2)      USB2HostD(2)    */      \
 688 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 GMC1TxD(3)      USB2HostD(3)    */      \
 689 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 GMC1TxD(4)      USB2HostD(4)    */      \
 690 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 GMC1TxD(5)      USB2HostD(5)    */      \
 691 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 GMC1TxD(6)      USB2HostD(6)    */      \
 692 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 GMC1TxD(7)      USB2HostD(7)    */      \
 693 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 GMC1RxD(0)      USB2OTGD(0)     */      \
 694 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 GMC1RxD(1)      USB2OTGD(1)     */      \
 695 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 GMC1RxD(2)     USB2OTGD(2)     */      \
 696 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 GMC1RxD(3)     USB2OTGD(3)     */      \
 697 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO12 GMC1RxD(4)     USB2OTGD(4)     */      \
 698 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO13 GMC1RxD(5)     USB2OTGD(5)     */      \
 699 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO14 GMC1RxD(6)     USB2OTGD(6)     */      \
 700 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO15 GMC1RxD(7)     USB2OTGD(7)     */      \
 701 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMC1TxER       USB2HostStop    */      \
 702 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMC1CD         USB2HostNext    */      \
 703 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMC1RxER       USB2HostDir     */      \
 704 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 GMC1TxEN       USB2OTGStop     */      \
 705 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 GMC1CRS        USB2OTGNext     */      \
 706 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 GMC1RxDV       USB2OTGDir      */      \
 707 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO22 NFRDY                          */      \
 708 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 NFREN                          */      \
 709 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 NFWEN                          */      \
 710 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 NFCLE                          */      \
 711 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 NFALE                          */      \
 712 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO27 IRQ(0)                         */      \
 713 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO28 IRQ(1)                         */      \
 714 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO29 IRQ(2)                         */      \
 715 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO30 PerPar0        DMAReq2         IRQ(7)*/ \
 716 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO31 PerPar1        DMAAck2         IRQ(8)*/ \
 717 },                                                                                      \
 718 {                                                                                       \
 719 /* GPIO Core 1 */                                                                       \
 720 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 PerPar2        EOT2/TC2        IRQ(9)*/ \
 721 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 PerPar3        DMAReq3         IRQ(4)*/ \
 722 {GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N    UART1_DSR_CTS_N UART2_SOUT*/ \
 723 {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
 724 {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N DMAAck3       UART3_SIN*/ \
 725 {GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N    EOT3/TC3        UART3_SOUT*/ \
 726 {GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N    UART1_SOUT      */      \
 727 {GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N     UART1_SIN       */      \
 728 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 IRQ(3)                         */      \
 729 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 CS(1)                          */      \
 730 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 CS(2)                          */      \
 731 {GPIO1_BASE, GPIO_OUT, GPIO43_USE, GPIO_OUT_0},/* GPIO43 CS(3)          DMAReq1         IRQ(10)*/ \
 732 {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO44 CS(4)          DMAAck1         IRQ(11)*/ \
 733 {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO45 CS(5)          EOT/TC1         IRQ(12)*/ \
 734 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 PerAddr(5)     DMAReq0         IRQ(13)*/ \
 735 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 PerAddr(6)     DMAAck0         IRQ(14)*/ \
 736 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 PerAddr(7)     EOT/TC0         IRQ(15)*/ \
 737 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49  Unselect via TraceSelect Bit  */      \
 738 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50  Unselect via TraceSelect Bit  */      \
 739 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51  Unselect via TraceSelect Bit  */      \
 740 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52  Unselect via TraceSelect Bit  */      \
 741 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53  Unselect via TraceSelect Bit  */      \
 742 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54  Unselect via TraceSelect Bit  */      \
 743 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55  Unselect via TraceSelect Bit  */      \
 744 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56  Unselect via TraceSelect Bit  */      \
 745 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57  Unselect via TraceSelect Bit  */      \
 746 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58  Unselect via TraceSelect Bit  */      \
 747 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59  Unselect via TraceSelect Bit  */      \
 748 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60  Unselect via TraceSelect Bit  */      \
 749 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61  Unselect via TraceSelect Bit  */      \
 750 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62  Unselect via TraceSelect Bit  */      \
 751 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63  Unselect via TraceSelect Bit  */      \
 752 }                                                                                       \
 753 }
 754 #endif
 755
 756 #endif  /* __CONFIG_H */