include/configs/cgtqmx6eval.h

   1 /*
   2  *
   3  * Congatec Conga-QEVAl board configuration file.
   4  *
   5  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   6  * Based on Freescale i.MX6Q Sabre Lite board configuration file.
   7  * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
   8  * Leo Sartre, <lsartre@adeneo-embedded.com>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_CGTQMX6EVAL_H
  14 #define __CONFIG_CGTQMX6EVAL_H
  15
  16 #include "mx6_common.h"
  17
  18 #define CONFIG_MACH_TYPE        4122
  19
  20 /* Size of malloc() pool */
  21 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  22
  23 #define CONFIG_BOARD_EARLY_INIT_F
  24 #define CONFIG_MISC_INIT_R
  25
  26 #define CONFIG_MXC_UART
  27 #define CONFIG_MXC_UART_BASE           UART2_BASE
  28
  29 /* MMC Configs */
  30 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  31
  32 /* SPI NOR */
  33 #define CONFIG_CMD_SF
  34 #define CONFIG_SPI_FLASH
  35 #define CONFIG_SPI_FLASH_STMICRO
  36 #define CONFIG_SPI_FLASH_SST
  37 #define CONFIG_MXC_SPI
  38 #define CONFIG_SF_DEFAULT_BUS           0
  39 #define CONFIG_SF_DEFAULT_SPEED         20000000
  40 #define CONFIG_SF_DEFAULT_MODE          (SPI_MODE_0)
  41
  42 /* Miscellaneous commands */
  43 #define CONFIG_CMD_BMODE
  44
  45 /* Thermal support */
  46 #define CONFIG_IMX_THERMAL
  47
  48 /* I2C Configs */
  49 #define CONFIG_CMD_I2C
  50 #define CONFIG_SYS_I2C
  51 #define CONFIG_SYS_I2C_MXC
  52 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  53 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  54 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  55 #define CONFIG_SYS_I2C_SPEED              100000
  56
  57 /* PMIC */
  58 #define CONFIG_POWER
  59 #define CONFIG_POWER_I2C
  60 #define CONFIG_POWER_PFUZE100
  61 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
  62
  63 /* USB Configs */
  64 #define CONFIG_CMD_USB
  65 #define CONFIG_CMD_FAT
  66 #define CONFIG_USB_EHCI
  67 #define CONFIG_USB_EHCI_MX6
  68 #define CONFIG_USB_STORAGE
  69 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  70 #define CONFIG_USB_HOST_ETHER
  71 #define CONFIG_USB_ETHER_ASIX
  72 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  73 #define CONFIG_MXC_USB_FLAGS    0
  74 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
  75 #define CONFIG_USB_KEYBOARD
  76 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
  77
  78 #define CONFIG_CI_UDC
  79 #define CONFIG_USBD_HS
  80 #define CONFIG_USB_GADGET_DUALSPEED
  81
  82 #define CONFIG_USB_GADGET
  83 #define CONFIG_CMD_USB_MASS_STORAGE
  84 #define CONFIG_USB_FUNCTION_MASS_STORAGE
  85 #define CONFIG_USB_GADGET_DOWNLOAD
  86 #define CONFIG_USB_GADGET_VBUS_DRAW     2
  87
  88 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
  89 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
  90 #define CONFIG_G_DNL_MANUFACTURER       "Congatec"
  91
  92 /* Framebuffer */
  93 #define CONFIG_VIDEO
  94 #define CONFIG_VIDEO_IPUV3
  95 #define CONFIG_CFB_CONSOLE
  96 #define CONFIG_VGA_AS_SINGLE_DEVICE
  97 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  98 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
  99 #define CONFIG_VIDEO_BMP_RLE8
 100 #define CONFIG_SPLASH_SCREEN
 101 #define CONFIG_SPLASH_SCREEN_ALIGN
 102 #define CONFIG_BMP_16BPP
 103 #define CONFIG_VIDEO_LOGO
 104 #define CONFIG_VIDEO_BMP_LOGO
 105 #ifdef CONFIG_MX6DL
 106 #define CONFIG_IPUV3_CLK 198000000
 107 #else
 108 #define CONFIG_IPUV3_CLK 264000000
 109 #endif
 110 #define CONFIG_IMX_HDMI
 111
 112 /* SATA */
 113 #define CONFIG_CMD_SATA
 114 #define CONFIG_DWC_AHSATA
 115 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 116 #define CONFIG_DWC_AHSATA_PORT_ID       0
 117 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 118 #define CONFIG_LBA48
 119 #define CONFIG_LIBATA
 120
 121 /* Ethernet */
 122 #define CONFIG_CMD_PING
 123 #define CONFIG_CMD_DHCP
 124 #define CONFIG_CMD_MII
 125 #define CONFIG_FEC_MXC
 126 #define CONFIG_MII
 127 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 128 #define CONFIG_FEC_XCV_TYPE             RGMII
 129 #define CONFIG_ETHPRIME                 "FEC"
 130 #define CONFIG_FEC_MXC_PHYADDR          6
 131 #define CONFIG_PHYLIB
 132 #define CONFIG_PHY_ATHEROS
 133
 134 /* Command definition */
 135
 136 #define CONFIG_MXC_UART_BASE    UART2_BASE
 137 #define CONFIG_CONSOLE_DEV      "ttymxc1"
 138 #define CONFIG_MMCROOT          "/dev/mmcblk0p2"
 139 #define CONFIG_SYS_MMC_ENV_DEV          0
 140
 141 #define CONFIG_EXTRA_ENV_SETTINGS \
 142         "script=boot.scr\0" \
 143         "image=zImage\0" \
 144         "fdtfile=imx6q-qmx6.dtb\0" \
 145         "fdt_addr_r=0x18000000\0" \
 146         "boot_fdt=try\0" \
 147         "ip_dyn=yes\0" \
 148         "console=" CONFIG_CONSOLE_DEV "\0" \
 149         "bootm_size=0x10000000\0" \
 150         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 151         "mmcpart=1\0" \
 152         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 153         "update_sd_firmware=" \
 154                 "if test ${ip_dyn} = yes; then " \
 155                         "setenv get_cmd dhcp; " \
 156                 "else " \
 157                         "setenv get_cmd tftp; " \
 158                 "fi; " \
 159                 "if mmc dev ${mmcdev}; then "   \
 160                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 161                                 "setexpr fw_sz ${filesize} / 0x200; " \
 162                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 163                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 164                         "fi; "  \
 165                 "fi\0" \
 166         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 167                 "root=${mmcroot}\0" \
 168         "loadbootscript=" \
 169                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 170         "bootscript=echo Running bootscript from mmc ...; " \
 171                 "source\0" \
 172         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 173         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
 174         "mmcboot=echo Booting from mmc ...; " \
 175                 "run mmcargs; " \
 176                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 177                         "if run loadfdt; then " \
 178                                 "bootz ${loadaddr} - ${fdt_addr_r}; " \
 179                         "else " \
 180                                 "if test ${boot_fdt} = try; then " \
 181                                         "bootz; " \
 182                                 "else " \
 183                                         "echo WARN: Cannot load the DT; " \
 184                                 "fi; " \
 185                         "fi; " \
 186                 "else " \
 187                         "bootz; " \
 188                 "fi;\0" \
 189         "netargs=setenv bootargs console=${console},${baudrate} " \
 190                 "root=/dev/nfs " \
 191                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 192         "netboot=echo Booting from net ...; " \
 193                 "run netargs; " \
 194                 "if test ${ip_dyn} = yes; then " \
 195                         "setenv get_cmd dhcp; " \
 196                 "else " \
 197                         "setenv get_cmd tftp; " \
 198                 "fi; " \
 199                 "${get_cmd} ${image}; " \
 200                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 201                         "if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
 202                                 "bootz ${loadaddr} - ${fdt_addr_r}; " \
 203                         "else " \
 204                                 "if test ${boot_fdt} = try; then " \
 205                                         "bootz; " \
 206                                 "else " \
 207                                         "echo WARN: Cannot load the DT; " \
 208                                 "fi; " \
 209                         "fi; " \
 210                 "else " \
 211                         "bootz; " \
 212                 "fi;\0" \
 213         "spilock=sf probe && sf protect lock 0x3f0000 0x10000;"\
 214
 215 #define CONFIG_BOOTCOMMAND \
 216         "run spilock;"      \
 217         "mmc dev ${mmcdev};" \
 218         "if mmc rescan; then " \
 219                 "if run loadbootscript; then " \
 220                 "run bootscript; " \
 221                 "else " \
 222                         "if run loadimage; then " \
 223                                 "run mmcboot; " \
 224                         "else run netboot; " \
 225                         "fi; " \
 226                 "fi; " \
 227         "else run netboot; fi"
 228
 229 #define CONFIG_SYS_MEMTEST_START       0x10000000
 230 #define CONFIG_SYS_MEMTEST_END         0x10010000
 231 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 232
 233 /* Physical Memory Map */
 234 #define CONFIG_NR_DRAM_BANKS           1
 235 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 236 #define PHYS_SDRAM_SIZE                        (1u * 1024 * 1024 * 1024)
 237
 238 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 239 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 240 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 241
 242 #define CONFIG_SYS_INIT_SP_OFFSET \
 243         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 244 #define CONFIG_SYS_INIT_SP_ADDR \
 245         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 246
 247 /* Environment organization */
 248 #define CONFIG_ENV_SIZE                 (8 * 1024)
 249
 250 #define CONFIG_ENV_IS_IN_MMC
 251
 252 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 253 #define CONFIG_SYS_MMC_ENV_DEV          0
 254
 255 #endif                         /* __CONFIG_CGTQMX6EVAL_H */