include/configs/clearfog.h

   1 /*
   2  * Copyright (C) 2015 Stefan Roese <sr@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef _CONFIG_CLEARFOG_H
   8 #define _CONFIG_CLEARFOG_H
   9
  10 /*
  11  * High Level Configuration Options (easy to change)
  12  */
  13
  14 #define CONFIG_DISPLAY_BOARDINFO_LATE
  15
  16 /*
  17  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  18  * for DDR ECC byte filling in the SPL before loading the main
  19  * U-Boot into it.
  20  */
  21 #define CONFIG_SYS_TEXT_BASE    0x00800000
  22 #define CONFIG_SYS_TCLK         250000000       /* 250MHz */
  23
  24 /*
  25  * Commands configuration
  26  */
  27 #define CONFIG_CMD_PCI
  28
  29 /* I2C */
  30 #define CONFIG_SYS_I2C
  31 #define CONFIG_SYS_I2C_MVTWSI
  32 #define CONFIG_I2C_MVTWSI_BASE0         MVEBU_TWSI_BASE
  33 #define CONFIG_SYS_I2C_SLAVE            0x0
  34 #define CONFIG_SYS_I2C_SPEED            100000
  35
  36 /* SPI NOR flash default params, used by sf commands */
  37 #define CONFIG_SF_DEFAULT_SPEED         1000000
  38 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_3
  39 #define CONFIG_SPI_FLASH_STMICRO
  40
  41 /*
  42  * SDIO/MMC Card Configuration
  43  */
  44 #define CONFIG_SYS_MMC_BASE             MVEBU_SDIO_BASE
  45
  46 /* Partition support */
  47
  48 /* Additional FS support/configuration */
  49 #define CONFIG_SUPPORT_VFAT
  50
  51 /* USB/EHCI configuration */
  52 #define CONFIG_EHCI_IS_TDI
  53
  54 #define CONFIG_ENV_MIN_ENTRIES          128
  55
  56 /* Environment in MMC */
  57 #define CONFIG_SYS_MMC_ENV_DEV          0
  58 #define CONFIG_ENV_SECT_SIZE            0x200
  59 #define CONFIG_ENV_SIZE                 0x10000
  60 /*
  61  * For SD - reserve 1 LBA for MBR + 1M for u-boot image. The MMC/eMMC
  62  * boot image starts @ LBA-0.
  63  * As result in MMC/eMMC case it will be a 1 sector gap between u-boot
  64  * image and environment
  65  */
  66 #define CONFIG_ENV_OFFSET               0xf0000
  67 #define CONFIG_ENV_ADDR                 CONFIG_ENV_OFFSET
  68
  69 #define CONFIG_PHY_MARVELL              /* there is a marvell phy */
  70 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer aneg time */
  71
  72 /* PCIe support */
  73 #ifndef CONFIG_SPL_BUILD
  74 #define CONFIG_PCI_MVEBU
  75 #define CONFIG_PCI_SCAN_SHOW
  76 #endif
  77
  78 #define CONFIG_SYS_ALT_MEMTEST
  79
  80 /* Keep device tree and initrd in lower memory so the kernel can access them */
  81 #define RELOCATION_LIMITS_ENV_SETTINGS  \
  82         "fdt_high=0x10000000\0"         \
  83         "initrd_high=0x10000000\0"
  84
  85 /* SPL */
  86 /*
  87  * Select the boot device here
  88  *
  89  * Currently supported are:
  90  * SPL_BOOT_SPI_NOR_FLASH       - Booting via SPI NOR flash
  91  * SPL_BOOT_SDIO_MMC_CARD       - Booting via SDIO/MMC card (partition 1)
  92  */
  93 #define SPL_BOOT_SPI_NOR_FLASH          1
  94 #define SPL_BOOT_SDIO_MMC_CARD          2
  95 #define CONFIG_SPL_BOOT_DEVICE          SPL_BOOT_SDIO_MMC_CARD
  96
  97 /* Defines for SPL */
  98 #define CONFIG_SPL_FRAMEWORK
  99 #define CONFIG_SPL_SIZE                 (140 << 10)
 100 #define CONFIG_SPL_TEXT_BASE            0x40000030
 101 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x0030)
 102
 103 #define CONFIG_SPL_BSS_START_ADDR       (0x40000000 + CONFIG_SPL_SIZE)
 104 #define CONFIG_SPL_BSS_MAX_SIZE         (16 << 10)
 105
 106 #ifdef CONFIG_SPL_BUILD
 107 #define CONFIG_SYS_MALLOC_SIMPLE
 108 #endif
 109
 110 #define CONFIG_SPL_STACK                (0x40000000 + ((192 - 16) << 10))
 111 #define CONFIG_SPL_BOOTROM_SAVE         (CONFIG_SPL_STACK + 4)
 112
 113 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
 114 /* SPL related SPI defines */
 115 #define CONFIG_SPL_SPI_LOAD
 116 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x20000
 117 #define CONFIG_SYS_U_BOOT_OFFS          CONFIG_SYS_SPI_U_BOOT_OFFS
 118 #endif
 119
 120 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
 121 /* SPL related MMC defines */
 122 #define CONFIG_SYS_MMC_U_BOOT_OFFS              (160 << 10)
 123 #define CONFIG_SYS_U_BOOT_OFFS                  CONFIG_SYS_MMC_U_BOOT_OFFS
 124 #ifdef CONFIG_SPL_BUILD
 125 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER       0x00180000      /* in SDRAM */
 126 #endif
 127 #endif
 128
 129 /*
 130  * mv-common.h should be defined after CMD configs since it used them
 131  * to enable certain macros
 132  */
 133 #include "mv-common.h"
 134
 135 /* Include the common distro boot environment */
 136 #ifndef CONFIG_SPL_BUILD
 137 #include <config_distro_defaults.h>
 138
 139 #ifdef CONFIG_MMC
 140 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
 141 #else
 142 #define BOOT_TARGET_DEVICES_MMC(func)
 143 #endif
 144
 145 #ifdef CONFIG_USB_STORAGE
 146 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
 147 #else
 148 #define BOOT_TARGET_DEVICES_USB(func)
 149 #endif
 150
 151 #define BOOT_TARGET_DEVICES(func) \
 152         BOOT_TARGET_DEVICES_MMC(func) \
 153         BOOT_TARGET_DEVICES_USB(func) \
 154         func(PXE, pxe, na) \
 155         func(DHCP, dhcp, na)
 156
 157 #define KERNEL_ADDR_R   __stringify(0x800000)
 158 #define FDT_ADDR_R      __stringify(0x100000)
 159 #define RAMDISK_ADDR_R  __stringify(0x1800000)
 160 #define SCRIPT_ADDR_R   __stringify(0x200000)
 161 #define PXEFILE_ADDR_R  __stringify(0x300000)
 162
 163 #define LOAD_ADDRESS_ENV_SETTINGS \
 164         "kernel_addr_r=" KERNEL_ADDR_R "\0" \
 165         "fdt_addr_r=" FDT_ADDR_R "\0" \
 166         "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" \
 167         "scriptaddr=" SCRIPT_ADDR_R "\0" \
 168         "pxefile_addr_r=" PXEFILE_ADDR_R "\0"
 169
 170 #include <config_distro_bootcmd.h>
 171
 172 #define CONFIG_EXTRA_ENV_SETTINGS \
 173         RELOCATION_LIMITS_ENV_SETTINGS \
 174         LOAD_ADDRESS_ENV_SETTINGS \
 175         "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
 176         "console=ttyS0,115200\0" \
 177         BOOTENV
 178
 179 #endif /* CONFIG_SPL_BUILD */
 180
 181 #endif /* _CONFIG_CLEARFOG_H */