include/configs/cm-bf527.h

   1 /*
   2  * U-boot - Configuration file for CM-BF527 board
   3  */
   4
   5 #ifndef __CONFIG_CM_BF527_H__
   6 #define __CONFIG_CM_BF527_H__
   7
   8 #include <asm/config-pre.h>
   9
  10
  11 /*
  12  * Processor Settings
  13  */
  14 #define CONFIG_BFIN_CPU             bf527-0.0
  15 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_PARA
  16
  17
  18 /*
  19  * Clock Settings
  20  *      CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
  21  *      SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
  22  */
  23 /* CONFIG_CLKIN_HZ is any value in Hz                                   */
  24 #define CONFIG_CLKIN_HZ                 25000000
  25 /* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN             */
  26 /*                                                1 = CLKIN / 2         */
  27 #define CONFIG_CLKIN_HALF               0
  28 /* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass     */
  29 /*                                                1 = bypass PLL        */
  30 #define CONFIG_PLL_BYPASS               0
  31 /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL              */
  32 /* Values can range from 0-63 (where 0 means 64)                        */
  33 #define CONFIG_VCO_MULT                 21
  34 /* CCLK_DIV controls the core clock divider                             */
  35 /* Values can be 1, 2, 4, or 8 ONLY                                     */
  36 #define CONFIG_CCLK_DIV                 1
  37 /* SCLK_DIV controls the system clock divider                           */
  38 /* Values can range from 1-15                                           */
  39 #define CONFIG_SCLK_DIV                 4
  40
  41
  42 /*
  43  * Memory Settings
  44  */
  45 #define CONFIG_MEM_ADD_WDTH     9
  46 #define CONFIG_MEM_SIZE         32
  47
  48 #define CONFIG_EBIU_SDRRC_VAL   0x3f8
  49 #define CONFIG_EBIU_SDGCTL_VAL  0x9111cd
  50
  51 #define CONFIG_EBIU_AMGCTL_VAL  (AMBEN_ALL)
  52 #define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
  53 #define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
  54
  55 #define CONFIG_SYS_MONITOR_LEN  (256 * 1024)
  56 #define CONFIG_SYS_MALLOC_LEN   (128 * 1024)
  57
  58
  59 /*
  60  * NAND Settings
  61  * (can't be used sametime as ethernet)
  62  */
  63 /* #define CONFIG_BFIN_NFC */
  64 #ifdef CONFIG_BFIN_NFC
  65 #define CONFIG_BFIN_NFC_CTL_VAL 0x0033
  66 #define CONFIG_SYS_NAND_BASE            0 /* not actually used */
  67 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  68 #define NAND_MAX_CHIPS          1
  69 #define CONFIG_CMD_NAND
  70 #endif
  71
  72
  73 /*
  74  * Network Settings
  75  */
  76 #if !defined(__ADSPBF522__) && !defined(__ADSPBF523__) && \
  77     !defined(__ADSPBF524__) && !defined(__ADSPBF525__) && !defined(CONFIG_BFIN_NFC)
  78 #define ADI_CMDS_NETWORK        1
  79 #define CONFIG_BFIN_MAC
  80 #define CONFIG_RMII
  81 #define CONFIG_NETCONSOLE       1
  82 #define CONFIG_NET_MULTI        1
  83 #endif
  84 #define CONFIG_HOSTNAME         cm-bf527
  85 /* Uncomment next line to use fixed MAC address */
  86 /* #define CONFIG_ETHADDR       02:80:ad:20:31:e8 */
  87
  88
  89 /*
  90  * Flash Settings
  91  */
  92 #define CONFIG_FLASH_CFI_DRIVER
  93 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
  94 #define CONFIG_SYS_FLASH_BASE           0x20000000
  95 #define CONFIG_SYS_FLASH_CFI
  96 #define CONFIG_SYS_FLASH_PROTECTION
  97 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  98 #define CONFIG_SYS_MAX_FLASH_SECT       64
  99
 100
 101 /*
 102  * Env Storage Settings
 103  */
 104 #define CONFIG_ENV_IS_IN_FLASH  1
 105 #define CONFIG_ENV_ADDR         0x20008000
 106 #define CONFIG_ENV_OFFSET       0x8000
 107 #define CONFIG_ENV_SIZE         0x8000
 108 #define CONFIG_ENV_SECT_SIZE    0x20000
 109 #define ENV_IS_EMBEDDED_CUSTOM
 110
 111
 112 /*
 113  * I2C Settings
 114  */
 115 #define CONFIG_BFIN_TWI_I2C     1
 116 #define CONFIG_HARD_I2C         1
 117 #define CONFIG_SYS_I2C_SPEED    50000
 118 #define CONFIG_SYS_I2C_SLAVE    0
 119
 120
 121 /*
 122  * Misc Settings
 123  */
 124 #define CONFIG_BAUDRATE         115200
 125 #define CONFIG_MISC_INIT_R
 126 #define CONFIG_RTC_BFIN
 127 #define CONFIG_UART_CONSOLE     0
 128
 129
 130 /*
 131  * Pull in common ADI header for remaining command/environment setup
 132  */
 133 #include <configs/bfin_adi_common.h>
 134
 135 #endif