include/configs/cm-bf537u.h

   1 /*
   2  * U-Boot - Configuration file for CM-BF537U board
   3  */
   4
   5 #ifndef __CONFIG_CM_BF537U_H__
   6 #define __CONFIG_CM_BF537U_H__
   7
   8 #include <asm/config-pre.h>
   9
  10 /*
  11  * Processor Settings
  12  */
  13 #define CONFIG_BFIN_CPU             bf537-0.2
  14 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
  15
  16 /*
  17  * Clock Settings
  18  *      CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
  19  *      SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
  20  */
  21 /* CONFIG_CLKIN_HZ is any value in Hz                                   */
  22 #define CONFIG_CLKIN_HZ                 30000000
  23 /* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN             */
  24 /*                                                1 = CLKIN / 2         */
  25 #define CONFIG_CLKIN_HALF               0
  26 /* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass     */
  27 /*                                                1 = bypass PLL        */
  28 #define CONFIG_PLL_BYPASS               0
  29 /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL              */
  30 /* Values can range from 0-63 (where 0 means 64)                        */
  31 #define CONFIG_VCO_MULT                 18
  32 /* CCLK_DIV controls the core clock divider                             */
  33 /* Values can be 1, 2, 4, or 8 ONLY                                     */
  34 #define CONFIG_CCLK_DIV                 1
  35 /* SCLK_DIV controls the system clock divider                           */
  36 /* Values can range from 1-15                                           */
  37 #define CONFIG_SCLK_DIV                 5
  38 /* Core voltage */
  39 #define CONFIG_VR_CTL_VAL (VLEV_110 | GAIN_20 | FREQ_1000)
  40
  41 /*
  42  * Memory Settings
  43  */
  44 #define CONFIG_MEM_ADD_WDTH     9
  45 #define CONFIG_MEM_SIZE         32
  46
  47 #define CONFIG_EBIU_SDRRC_VAL   0x3f8
  48 #define CONFIG_EBIU_SDGCTL_VAL  0x9111cd
  49
  50 #define CONFIG_EBIU_AMGCTL_VAL  (AMBEN_ALL)
  51 #define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
  52 #define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
  53
  54 #define CONFIG_SYS_MONITOR_LEN  (768 * 1024)
  55 #define CONFIG_SYS_MALLOC_LEN   (128 * 1024)
  56
  57 /*
  58  * Network Settings
  59  */
  60 #ifndef __ADSPBF534__
  61 #define ADI_CMDS_NETWORK        1
  62 #define CONFIG_SMC911X          1
  63 #define CONFIG_SMC911X_BASE     0x20308000
  64 #define CONFIG_SMC911X_16_BIT
  65 #define CONFIG_NETCONSOLE       1
  66 #endif
  67 #define CONFIG_HOSTNAME         cm-bf537u
  68
  69 /*
  70  * Flash Settings
  71  */
  72 #define CONFIG_FLASH_CFI_DRIVER
  73 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
  74 #define CONFIG_SYS_FLASH_BASE           0x20000000
  75 #define CONFIG_SYS_FLASH_CFI
  76 #define CONFIG_SYS_FLASH_PROTECTION
  77 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  78 #define CONFIG_SYS_MAX_FLASH_SECT       35
  79
  80 /*
  81  * SPI Settings
  82  */
  83 #define CONFIG_BFIN_SPI
  84 #define CONFIG_ENV_SPI_MAX_HZ   30000000
  85
  86 /*
  87  * Env Storage Settings
  88  */
  89 #define CONFIG_ENV_IS_IN_FLASH  1
  90 #define CONFIG_ENV_OFFSET       0x8000
  91 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
  92 #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
  93 #define CONFIG_ENV_SECT_SIZE    0x8000
  94 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
  95 #define ENV_IS_EMBEDDED
  96 #endif
  97 #ifdef ENV_IS_EMBEDDED
  98 /* WARNING - the following is hand-optimized to fit within
  99  * the sector before the environment sector. If it throws
 100  * an error during compilation remove an object here to get
 101  * it linked after the configuration sector.
 102  */
 103 # define LDS_BOARD_TEXT \
 104         arch/blackfin/lib/built-in.o (.text*); \
 105         arch/blackfin/cpu/built-in.o (.text*); \
 106         . = DEFINED(env_offset) ? env_offset : .; \
 107         common/env_embedded.o (.text*);
 108 #endif
 109
 110 /*
 111  * I2C Settings
 112  */
 113 #define CONFIG_SYS_I2C
 114 #define CONFIG_SYS_I2C_ADI
 115
 116 /*
 117  * SPI_MMC Settings
 118  */
 119 #define CONFIG_GENERIC_MMC
 120 #define CONFIG_MMC_SPI
 121
 122 /*
 123  * Misc Settings
 124  */
 125 #define CONFIG_BAUDRATE         115200
 126 #define CONFIG_MISC_INIT_R
 127 #define CONFIG_RTC_BFIN
 128 #define CONFIG_UART_CONSOLE     0
 129 #define CONFIG_BOOTCOMMAND      "run flashboot"
 130 #define FLASHBOOT_ENV_SETTINGS \
 131         "flashboot=flread 20040000 1000000 300000;" \
 132         "bootm 0x1000000\0"
 133 #define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024))
 134
 135 /*
 136  * Pull in common ADI header for remaining command/environment setup
 137  */
 138 #include <configs/bfin_adi_common.h>
 139
 140 #endif