include/configs/cm_fx6.h

   1 /*
   2  * Config file for Compulab CM-FX6 board
   3  *
   4  * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
   5  *
   6  * Author: Nikita Kiryanov <nikita@compulab.co.il>
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_CM_FX6_H
  12 #define __CONFIG_CM_FX6_H
  13
  14 #include "mx6_common.h"
  15
  16 /* Machine config */
  17 #define CONFIG_SYS_LITTLE_ENDIAN
  18 #define CONFIG_MACH_TYPE                4273
  19
  20 /* CMD */
  21 #define CONFIG_CMD_GREPENV
  22
  23 /* MMC */
  24 #define CONFIG_SYS_FSL_USDHC_NUM        3
  25 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  26
  27 /* RAM */
  28 #define PHYS_SDRAM_1                    MMDC0_ARB_BASE_ADDR
  29 #define PHYS_SDRAM_2                    MMDC1_ARB_BASE_ADDR
  30 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  31 #define CONFIG_NR_DRAM_BANKS            2
  32 #define CONFIG_SYS_MEMTEST_START        0x10000000
  33 #define CONFIG_SYS_MEMTEST_END          0x10010000
  34 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  35 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  36 #define CONFIG_SYS_INIT_SP_OFFSET \
  37         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  38 #define CONFIG_SYS_INIT_SP_ADDR \
  39         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  40
  41 /* Serial console */
  42 #define CONFIG_MXC_UART
  43 #define CONFIG_MXC_UART_BASE            UART4_BASE
  44 #define CONFIG_BAUDRATE                 115200
  45 #define CONFIG_SYS_BAUDRATE_TABLE       {9600, 19200, 38400, 57600, 115200}
  46
  47 /* Shell */
  48 #define CONFIG_SYS_PROMPT       "CM-FX6 # "
  49 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE + \
  50                                         sizeof(CONFIG_SYS_PROMPT) + 16)
  51
  52 /* SPI flash */
  53 #define CONFIG_SF_DEFAULT_BUS           0
  54 #define CONFIG_SF_DEFAULT_CS            0
  55 #define CONFIG_SF_DEFAULT_SPEED         25000000
  56 #define CONFIG_SF_DEFAULT_MODE          (SPI_MODE_0)
  57
  58 /* Environment */
  59 #define CONFIG_ENV_IS_IN_SPI_FLASH
  60 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
  61 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
  62 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
  63 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
  64 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
  65 #define CONFIG_ENV_SIZE                 (8 * 1024)
  66 #define CONFIG_ENV_OFFSET               (768 * 1024)
  67
  68 #define CONFIG_EXTRA_ENV_SETTINGS \
  69         "stdin=serial,usbkbd\0" \
  70         "stdout=serial,vga\0" \
  71         "stderr=serial,vga\0" \
  72         "panel=HDMI\0" \
  73         "autoload=no\0" \
  74         "kernel=uImage-cm-fx6\0" \
  75         "script=boot.scr\0" \
  76         "dtb=cm-fx6.dtb\0" \
  77         "bootm_low=18000000\0" \
  78         "loadaddr=0x10800000\0" \
  79         "fdtaddr=0x11000000\0" \
  80         "console=ttymxc3,115200\0" \
  81         "ethprime=FEC0\0" \
  82         "video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
  83         "video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
  84         "doboot=bootm ${loadaddr}\0" \
  85         "doloadfdt=false\0" \
  86         "setboottypez=setenv kernel zImage-cm-fx6;" \
  87                 "setenv doboot bootz ${loadaddr} - ${fdtaddr};" \
  88                 "setenv doloadfdt true;\0" \
  89         "setboottypem=setenv kernel uImage-cm-fx6;" \
  90                 "setenv doboot bootm ${loadaddr};" \
  91                 "setenv doloadfdt false;\0"\
  92         "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
  93         "sataroot=/dev/sda2 rw rootwait\0" \
  94         "nandroot=/dev/mtdblock4 rw\0" \
  95         "nandrootfstype=ubifs\0" \
  96         "mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
  97                 "${video}\0" \
  98         "sataargs=setenv bootargs console=${console} root=${sataroot} " \
  99                 "${video}\0" \
 100         "nandargs=setenv bootargs console=${console} " \
 101                 "root=${nandroot} " \
 102                 "rootfstype=${nandrootfstype} " \
 103                 "${video}\0" \
 104         "nandboot=if run nandloadkernel; then " \
 105                         "run nandloadfdt;" \
 106                         "run setboottypem;" \
 107                         "run storagebootcmd;" \
 108                         "run setboottypez;" \
 109                         "run storagebootcmd;" \
 110                 "fi;\0" \
 111         "run_eboot=echo Starting EBOOT ...; "\
 112                 "mmc dev 2 && " \
 113                 "mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
 114         "loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0"\
 115         "loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0"\
 116         "loadfdt=load ${storagetype} ${storagedev} ${fdtaddr} ${dtb};\0" \
 117         "bootscript=echo Running bootscript from ${storagetype} ...;" \
 118                    "source ${loadaddr};\0" \
 119         "nandloadkernel=nand read ${loadaddr} 0 780000;\0" \
 120         "nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \
 121         "setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \
 122         "setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \
 123         "setupnandboot=setenv storagetype nand;\0" \
 124         "setupusbboot=setenv storagetype usb; setenv storagedev 0;\0" \
 125         "storagebootcmd=echo Booting from ${storagetype} ...;" \
 126                         "run ${storagetype}args; run doboot;\0" \
 127         "trybootk=if run loadkernel; then " \
 128                 "if ${doloadfdt}; then " \
 129                         "run loadfdt;" \
 130                 "fi;" \
 131                 "run storagebootcmd;" \
 132                 "fi;\0" \
 133         "trybootsmz=if run loadscript; then " \
 134                         "run bootscript;" \
 135                 "fi;" \
 136                 "run setboottypem;" \
 137                 "run trybootk;" \
 138                 "run setboottypez;" \
 139                 "run trybootk;\0"
 140
 141 #define CONFIG_BOOTCOMMAND \
 142         "run setupmmcboot;" \
 143         "mmc dev ${storagedev};" \
 144         "if mmc rescan; then " \
 145                 "run trybootsmz;" \
 146         "fi;" \
 147         "run setupusbboot;" \
 148         "if usb start; then "\
 149                 "if run loadscript; then " \
 150                         "run bootscript;" \
 151                 "fi;" \
 152         "fi;" \
 153         "run setupsataboot;" \
 154         "if sata init; then " \
 155                 "run trybootsmz;" \
 156         "fi;" \
 157         "run setupnandboot;" \
 158         "run nandboot;"
 159
 160 #define CONFIG_PREBOOT          "usb start"
 161
 162 /* SPI */
 163 #define CONFIG_SPI
 164 #define CONFIG_MXC_SPI
 165 #define CONFIG_SPI_FLASH_ATMEL
 166 #define CONFIG_SPI_FLASH_EON
 167 #define CONFIG_SPI_FLASH_GIGADEVICE
 168 #define CONFIG_SPI_FLASH_MACRONIX
 169 #define CONFIG_SPI_FLASH_SPANSION
 170 #define CONFIG_SPI_FLASH_STMICRO
 171 #define CONFIG_SPI_FLASH_SST
 172 #define CONFIG_SPI_FLASH_WINBOND
 173
 174 /* NAND */
 175 #ifndef CONFIG_SPL_BUILD
 176 #define CONFIG_CMD_NAND
 177 #define CONFIG_SYS_NAND_BASE            0x40000000
 178 #define CONFIG_SYS_NAND_MAX_CHIPS       1
 179 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 180 #define CONFIG_NAND_MXS
 181 #define CONFIG_SYS_NAND_ONFI_DETECTION
 182 /* APBH DMA is required for NAND support */
 183 #define CONFIG_APBH_DMA
 184 #define CONFIG_APBH_DMA_BURST
 185 #define CONFIG_APBH_DMA_BURST8
 186 #endif
 187
 188 /* Ethernet */
 189 #define CONFIG_FEC_MXC
 190 #define CONFIG_FEC_MXC_PHYADDR          0
 191 #define CONFIG_FEC_XCV_TYPE             RGMII
 192 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 193 #define CONFIG_PHYLIB
 194 #define CONFIG_PHY_ATHEROS
 195 #define CONFIG_MII
 196 #define CONFIG_ETHPRIME                 "FEC0"
 197 #define CONFIG_ARP_TIMEOUT              200UL
 198 #define CONFIG_NET_RETRY_COUNT          5
 199
 200 /* USB */
 201 #define CONFIG_USB_EHCI
 202 #define CONFIG_USB_EHCI_MX6
 203 #define CONFIG_USB_STORAGE
 204 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 205 #define CONFIG_MXC_USB_FLAGS            0
 206 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 207 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
 208 #define CONFIG_USB_KEYBOARD
 209 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 210 #define CONFIG_SYS_STDIO_DEREGISTER
 211
 212 /* I2C */
 213 #define CONFIG_SYS_I2C
 214 #define CONFIG_SYS_I2C_MXC
 215 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 216 #define CONFIG_SYS_I2C_SPEED            100000
 217 #define CONFIG_SYS_MXC_I2C3_SPEED       400000
 218
 219 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 220 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 221 #define CONFIG_SYS_I2C_EEPROM_BUS       2
 222
 223 /* SATA */
 224 #define CONFIG_CMD_SATA
 225 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 226 #define CONFIG_LIBATA
 227 #define CONFIG_LBA48
 228 #define CONFIG_DWC_AHSATA
 229 #define CONFIG_DWC_AHSATA_PORT_ID       0
 230 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 231
 232 /* Boot */
 233 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)
 234 #define CONFIG_SERIAL_TAG
 235
 236 /* misc */
 237 #define CONFIG_STACKSIZE                        (128 * 1024)
 238 #define CONFIG_SYS_MALLOC_LEN                   (10 * 1024 * 1024)
 239 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      800 /* 400 KB */
 240 #define CONFIG_OF_BOARD_SETUP
 241
 242 /* SPL */
 243 #include "imx6_spl.h"
 244 #define CONFIG_SPL_BOARD_INIT
 245 #define CONFIG_SPL_MMC_SUPPORT
 246 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80 /* offset 64 kb */
 247 #define CONFIG_SYS_MONITOR_LEN  (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS / 2 * 1024)
 248 #define CONFIG_SPL_SPI_SUPPORT
 249 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 250 #define CONFIG_SYS_SPI_U_BOOT_OFFS      (64 * 1024)
 251 #define CONFIG_SPL_SPI_LOAD
 252
 253 /* Display */
 254 #define CONFIG_VIDEO
 255 #define CONFIG_VIDEO_IPUV3
 256 #define CONFIG_IPUV3_CLK          260000000
 257 #define CONFIG_IMX_HDMI
 258 #define CONFIG_CFB_CONSOLE
 259 #define CONFIG_VGA_AS_SINGLE_DEVICE
 260 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 261 #define CONFIG_CONSOLE_MUX
 262 #define CONFIG_VIDEO_SW_CURSOR
 263
 264 #define CONFIG_SPLASH_SCREEN
 265 #define CONFIG_SPLASH_SOURCE
 266 #define CONFIG_CMD_BMP
 267 #define CONFIG_VIDEO_BMP_RLE8
 268
 269 #define CONFIG_VIDEO_LOGO
 270 #define CONFIG_VIDEO_BMP_LOGO
 271
 272 #endif  /* __CONFIG_CM_FX6_H */