include/configs/cm_fx6.h

   1 /*
   2  * Config file for Compulab CM-FX6 board
   3  *
   4  * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
   5  *
   6  * Author: Nikita Kiryanov <nikita@compulab.co.il>
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_CM_FX6_H
  12 #define __CONFIG_CM_FX6_H
  13
  14 #include "mx6_common.h"
  15
  16 /* Machine config */
  17 #define CONFIG_SYS_LITTLE_ENDIAN
  18 #define CONFIG_MACH_TYPE                4273
  19
  20 /* MMC */
  21 #define CONFIG_SYS_FSL_USDHC_NUM        3
  22 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  23
  24 /* RAM */
  25 #define PHYS_SDRAM_1                    MMDC0_ARB_BASE_ADDR
  26 #define PHYS_SDRAM_2                    MMDC1_ARB_BASE_ADDR
  27 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  28 #define CONFIG_NR_DRAM_BANKS            2
  29 #define CONFIG_SYS_MEMTEST_START        0x10000000
  30 #define CONFIG_SYS_MEMTEST_END          0x10010000
  31 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  32 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  33 #define CONFIG_SYS_INIT_SP_OFFSET \
  34         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  35 #define CONFIG_SYS_INIT_SP_ADDR \
  36         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  37
  38 /* Serial console */
  39 #define CONFIG_MXC_UART
  40 #define CONFIG_MXC_UART_BASE            UART4_BASE
  41 #define CONFIG_SYS_BAUDRATE_TABLE       {9600, 19200, 38400, 57600, 115200}
  42
  43 /* SPI flash */
  44 #define CONFIG_SF_DEFAULT_BUS           0
  45 #define CONFIG_SF_DEFAULT_CS            0
  46 #define CONFIG_SF_DEFAULT_SPEED         25000000
  47 #define CONFIG_SF_DEFAULT_MODE          (SPI_MODE_0)
  48
  49 /* MTD support */
  50 #ifndef CONFIG_SPL_BUILD
  51 #define CONFIG_MTD_DEVICE
  52 #define CONFIG_MTD_PARTITIONS
  53 #define CONFIG_SPI_FLASH_MTD
  54 #endif
  55
  56 #define MTDIDS_DEFAULT          "nor0=spi0.0"
  57 #define MTDPARTS_DEFAULT        "mtdparts=spi0.0:" \
  58                                 "768k(uboot)," \
  59                                 "256k(uboot-environment)," \
  60                                 "-(reserved)"
  61
  62 /* Environment */
  63 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
  64 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
  65 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
  66 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
  67 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
  68 #define CONFIG_ENV_SIZE                 (8 * 1024)
  69 #define CONFIG_ENV_OFFSET               (768 * 1024)
  70
  71 #define CONFIG_EXTRA_ENV_SETTINGS \
  72         "stdin=serial,usbkbd\0" \
  73         "stdout=serial,vga\0" \
  74         "stderr=serial,vga\0" \
  75         "panel=HDMI\0" \
  76         "autoload=no\0" \
  77         "uImage=uImage-cm-fx6\0" \
  78         "zImage=zImage-cm-fx6\0" \
  79         "kernel=uImage-cm-fx6\0" \
  80         "script=boot.scr\0" \
  81         "dtb=cm-fx6.dtb\0" \
  82         "bootm_low=18000000\0" \
  83         "loadaddr=0x10800000\0" \
  84         "fdtaddr=0x11000000\0" \
  85         "console=ttymxc3,115200\0" \
  86         "ethprime=FEC0\0" \
  87         "video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
  88         "video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
  89         "doboot=bootm ${loadaddr}\0" \
  90         "doloadfdt=false\0" \
  91         "mtdids=" MTDIDS_DEFAULT "\0" \
  92         "mtdparts=" MTDPARTS_DEFAULT "\0" \
  93         "setboottypez=setenv kernel ${zImage};" \
  94                 "setenv doboot bootz ${loadaddr} - ${fdtaddr};" \
  95                 "setenv doloadfdt true;\0" \
  96         "setboottypem=setenv kernel ${uImage};" \
  97                 "setenv doboot bootm ${loadaddr};" \
  98                 "setenv doloadfdt false;\0"\
  99         "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
 100         "sataroot=/dev/sda2 rw rootwait\0" \
 101         "nandroot=/dev/mtdblock4 rw\0" \
 102         "nandrootfstype=ubifs\0" \
 103         "mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
 104                 "${video} ${extrabootargs}\0" \
 105         "sataargs=setenv bootargs console=${console} root=${sataroot} " \
 106                 "${video} ${extrabootargs}\0" \
 107         "nandargs=setenv bootargs console=${console} " \
 108                 "root=${nandroot} " \
 109                 "rootfstype=${nandrootfstype} " \
 110                 "${video} ${extrabootargs}\0" \
 111         "nandboot=if run nandloadkernel; then " \
 112                         "run nandloadfdt;" \
 113                         "run setboottypem;" \
 114                         "run storagebootcmd;" \
 115                         "run setboottypez;" \
 116                         "run storagebootcmd;" \
 117                 "fi;\0" \
 118         "run_eboot=echo Starting EBOOT ...; "\
 119                 "mmc dev 2 && " \
 120                 "mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
 121         "loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0"\
 122         "loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0"\
 123         "loadfdt=load ${storagetype} ${storagedev} ${fdtaddr} ${dtb};\0" \
 124         "bootscript=echo Running bootscript from ${storagetype} ...;" \
 125                    "source ${loadaddr};\0" \
 126         "nandloadkernel=nand read ${loadaddr} 0 780000;\0" \
 127         "nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \
 128         "setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \
 129         "setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \
 130         "setupnandboot=setenv storagetype nand;\0" \
 131         "setupusbboot=setenv storagetype usb; setenv storagedev 0;\0" \
 132         "storagebootcmd=echo Booting from ${storagetype} ...;" \
 133                         "run ${storagetype}args; run doboot;\0" \
 134         "trybootk=if run loadkernel; then " \
 135                 "if ${doloadfdt}; then " \
 136                         "run loadfdt;" \
 137                 "fi;" \
 138                 "run storagebootcmd;" \
 139                 "fi;\0" \
 140         "trybootsmz=if run loadscript; then " \
 141                         "run bootscript;" \
 142                 "fi;" \
 143                 "run setboottypem;" \
 144                 "run trybootk;" \
 145                 "run setboottypez;" \
 146                 "run trybootk;\0"
 147
 148 #define CONFIG_BOOTCOMMAND \
 149         "run setupmmcboot;" \
 150         "mmc dev ${storagedev};" \
 151         "if mmc rescan; then " \
 152                 "run trybootsmz;" \
 153         "fi;" \
 154         "run setupusbboot;" \
 155         "if usb start; then "\
 156                 "if run loadscript; then " \
 157                         "run bootscript;" \
 158                 "fi;" \
 159         "fi;" \
 160         "run setupsataboot;" \
 161         "if sata init; then " \
 162                 "run trybootsmz;" \
 163         "fi;" \
 164         "run setupnandboot;" \
 165         "run nandboot;"
 166
 167 #define CONFIG_PREBOOT          "usb start;sf probe"
 168
 169 /* SPI */
 170 #define CONFIG_SPI
 171 #define CONFIG_MXC_SPI
 172
 173 /* NAND */
 174 #ifndef CONFIG_SPL_BUILD
 175 #define CONFIG_SYS_NAND_BASE            0x40000000
 176 #define CONFIG_SYS_NAND_MAX_CHIPS       1
 177 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 178 #define CONFIG_NAND_MXS
 179 #define CONFIG_SYS_NAND_ONFI_DETECTION
 180 /* APBH DMA is required for NAND support */
 181 #define CONFIG_APBH_DMA
 182 #define CONFIG_APBH_DMA_BURST
 183 #define CONFIG_APBH_DMA_BURST8
 184 #endif
 185
 186 /* Ethernet */
 187 #define CONFIG_FEC_MXC
 188 #define CONFIG_FEC_MXC_PHYADDR          0
 189 #define CONFIG_FEC_XCV_TYPE             RGMII
 190 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 191 #define CONFIG_PHY_ATHEROS
 192 #define CONFIG_MII
 193 #define CONFIG_ETHPRIME                 "FEC0"
 194 #define CONFIG_ARP_TIMEOUT              200UL
 195 #define CONFIG_NET_RETRY_COUNT          5
 196
 197 /* USB */
 198 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 199 #define CONFIG_MXC_USB_FLAGS            0
 200 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 201 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
 202
 203 /* I2C */
 204 #define CONFIG_SYS_I2C
 205 #define CONFIG_SYS_I2C_MXC
 206 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 207 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 208 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 209 #define CONFIG_SYS_I2C_SPEED            100000
 210 #define CONFIG_SYS_MXC_I2C3_SPEED       400000
 211
 212 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 213 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 214 #define CONFIG_SYS_I2C_EEPROM_BUS       2
 215
 216 /* SATA */
 217 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 218 #define CONFIG_LIBATA
 219 #define CONFIG_LBA48
 220 #define CONFIG_DWC_AHSATA
 221 #define CONFIG_DWC_AHSATA_PORT_ID       0
 222 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 223
 224 /* Boot */
 225 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)
 226 #define CONFIG_SERIAL_TAG
 227
 228 /* misc */
 229 #define CONFIG_SYS_MALLOC_LEN                   (10 * 1024 * 1024)
 230 #define CONFIG_MISC_INIT_R
 231
 232 /* SPL */
 233 #include "imx6_spl.h"
 234 #define CONFIG_SYS_SPI_U_BOOT_OFFS      (64 * 1024)
 235 #define CONFIG_SPL_SPI_LOAD
 236
 237 /* Display */
 238 #define CONFIG_VIDEO_IPUV3
 239 #define CONFIG_IMX_HDMI
 240
 241 #define CONFIG_SPLASH_SCREEN
 242 #define CONFIG_SPLASH_SOURCE
 243 #define CONFIG_VIDEO_BMP_RLE8
 244
 245 #define CONFIG_VIDEO_LOGO
 246 #define CONFIG_VIDEO_BMP_LOGO
 247
 248 /* EEPROM */
 249 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 250 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 251 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       4
 252 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 253 #define CONFIG_SYS_EEPROM_SIZE                  256
 254
 255 #endif  /* __CONFIG_CM_FX6_H */