include/configs/cm_t35.h

   1 /*
   2  * (C) Copyright 2011 CompuLab, Ltd.
   3  * Mike Rapoport <mike@compulab.co.il>
   4  * Igor Grinberg <grinberg@compulab.co.il>
   5  *
   6  * Based on omap3_beagle.h
   7  * (C) Copyright 2006-2008
   8  * Texas Instruments.
   9  * Richard Woodruff <r-woodruff2@ti.com>
  10  * Syed Mohammed Khasim <x0khasim@ti.com>
  11  *
  12  * Configuration settings for the CompuLab CM-T35 and CM-T3730 boards
  13  *
  14  * SPDX-License-Identifier:     GPL-2.0+
  15  */
  16
  17 #ifndef __CONFIG_H
  18 #define __CONFIG_H
  19
  20 /*
  21  * High Level Configuration Options
  22  */
  23 #define CONFIG_OMAP     /* in a TI OMAP core */
  24 #define CONFIG_OMAP_GPIO
  25 #define CONFIG_CMD_GPIO
  26 #define CONFIG_CM_T3X   /* working with CM-T35 and CM-T3730 */
  27 #define CONFIG_OMAP_COMMON
  28 #define CONFIG_SYS_GENERIC_BOARD
  29 /* Common ARM Erratas */
  30 #define CONFIG_ARM_ERRATA_454179
  31 #define CONFIG_ARM_ERRATA_430973
  32 #define CONFIG_ARM_ERRATA_621766
  33
  34 #define CONFIG_SDRC     /* The chip has SDRC controller */
  35
  36 #include <asm/arch/cpu.h>               /* get chip and board defs */
  37 #include <asm/arch/omap.h>
  38
  39 /*
  40  * Display CPU and Board information
  41  */
  42 #define CONFIG_DISPLAY_CPUINFO
  43 #define CONFIG_DISPLAY_BOARDINFO
  44
  45 /* Clock Defines */
  46 #define V_OSCK                  26000000        /* Clock output from T2 */
  47 #define V_SCLK                  (V_OSCK >> 1)
  48
  49 #define CONFIG_MISC_INIT_R
  50
  51 #define CONFIG_OF_LIBFDT                1
  52
  53 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  54 #define CONFIG_SETUP_MEMORY_TAGS
  55 #define CONFIG_INITRD_TAG
  56 #define CONFIG_REVISION_TAG
  57 #define CONFIG_SERIAL_TAG
  58
  59 /*
  60  * Size of malloc() pool
  61  */
  62 #define CONFIG_ENV_SIZE         (16 << 10)      /* 16 KiB */
  63                                         /* Sector */
  64 #define CONFIG_SYS_MALLOC_LEN   (CONFIG_ENV_SIZE + (128 << 10))
  65
  66 /*
  67  * Hardware drivers
  68  */
  69
  70 /*
  71  * NS16550 Configuration
  72  */
  73 #define V_NS16550_CLK                   48000000        /* 48MHz (APLL96/2) */
  74
  75 #define CONFIG_SYS_NS16550
  76 #define CONFIG_SYS_NS16550_SERIAL
  77 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  78 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  79
  80 /*
  81  * select serial console configuration
  82  */
  83 #define CONFIG_CONS_INDEX               3
  84 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  85 #define CONFIG_SERIAL3                  3       /* UART3 */
  86
  87 /* allow to overwrite serial and ethaddr */
  88 #define CONFIG_ENV_OVERWRITE
  89 #define CONFIG_BAUDRATE                 115200
  90 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
  91                                         115200}
  92
  93 #define CONFIG_GENERIC_MMC
  94 #define CONFIG_MMC
  95 #define CONFIG_OMAP_HSMMC
  96 #define CONFIG_DOS_PARTITION
  97
  98 /* USB */
  99 #define CONFIG_USB_OMAP3
 100 #define CONFIG_USB_EHCI
 101 #define CONFIG_USB_EHCI_OMAP
 102 #define CONFIG_USB_STORAGE
 103 #define CONFIG_MUSB_UDC
 104 #define CONFIG_TWL4030_USB
 105 #define CONFIG_CMD_USB
 106
 107 /* USB device configuration */
 108 #define CONFIG_USB_DEVICE
 109 #define CONFIG_USB_TTY
 110 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 111
 112 /* commands to include */
 113 #include <config_cmd_default.h>
 114
 115 #define CONFIG_CMD_CACHE
 116 #define CONFIG_CMD_EXT2         /* EXT2 Support                 */
 117 #define CONFIG_CMD_FAT          /* FAT support                  */
 118 #define CONFIG_CMD_MTDPARTS     /* Enable MTD parts commands */
 119 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
 120 #define CONFIG_MTD_PARTITIONS
 121 #define MTDIDS_DEFAULT          "nand0=nand"
 122 #define MTDPARTS_DEFAULT        "mtdparts=nand:512k(x-loader),"\
 123                                 "1920k(u-boot),256k(u-boot-env),"\
 124                                 "4m(kernel),-(fs)"
 125
 126 #define CONFIG_CMD_I2C          /* I2C serial bus support       */
 127 #define CONFIG_CMD_MMC          /* MMC support                  */
 128 #define CONFIG_CMD_NAND         /* NAND support                 */
 129 #define CONFIG_CMD_DHCP
 130 #define CONFIG_CMD_PING
 131
 132 #undef CONFIG_CMD_FLASH         /* flinfo, erase, protect       */
 133 #undef CONFIG_CMD_FPGA          /* FPGA configuration Support   */
 134 #undef CONFIG_CMD_IMLS          /* List all found images        */
 135
 136 #define CONFIG_SYS_NO_FLASH
 137 #define CONFIG_SYS_I2C
 138 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
 139 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
 140 #define CONFIG_SYS_I2C_OMAP34XX
 141 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 142 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 143 #define CONFIG_SYS_I2C_EEPROM_BUS       0
 144 #define CONFIG_I2C_MULTI_BUS
 145
 146 /*
 147  * TWL4030
 148  */
 149 #define CONFIG_TWL4030_POWER
 150 #define CONFIG_TWL4030_LED
 151
 152 /*
 153  * Board NAND Info.
 154  */
 155 #define CONFIG_SYS_NAND_QUIET_TEST
 156 #define CONFIG_NAND_OMAP_GPMC
 157 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
 158                                                         /* to access nand */
 159 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
 160                                                         /* to access nand at */
 161                                                         /* CS0 */
 162 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of NAND */
 163                                                         /* devices */
 164
 165 /* Environment information */
 166 #define CONFIG_BOOTDELAY                3
 167 #define CONFIG_ZERO_BOOTDELAY_CHECK
 168
 169 #define CONFIG_EXTRA_ENV_SETTINGS \
 170         "loadaddr=0x82000000\0" \
 171         "usbtty=cdc_acm\0" \
 172         "console=ttyO2,115200n8\0" \
 173         "mpurate=500\0" \
 174         "vram=12M\0" \
 175         "dvimode=1024x768MR-16@60\0" \
 176         "defaultdisplay=dvi\0" \
 177         "mmcdev=0\0" \
 178         "mmcroot=/dev/mmcblk0p2 rw\0" \
 179         "mmcrootfstype=ext4 rootwait\0" \
 180         "nandroot=/dev/mtdblock4 rw\0" \
 181         "nandrootfstype=ubifs\0" \
 182         "mmcargs=setenv bootargs console=${console} " \
 183                 "mpurate=${mpurate} " \
 184                 "vram=${vram} " \
 185                 "omapfb.mode=dvi:${dvimode} " \
 186                 "omapdss.def_disp=${defaultdisplay} " \
 187                 "root=${mmcroot} " \
 188                 "rootfstype=${mmcrootfstype}\0" \
 189         "nandargs=setenv bootargs console=${console} " \
 190                 "mpurate=${mpurate} " \
 191                 "vram=${vram} " \
 192                 "omapfb.mode=dvi:${dvimode} " \
 193                 "omapdss.def_disp=${defaultdisplay} " \
 194                 "root=${nandroot} " \
 195                 "rootfstype=${nandrootfstype}\0" \
 196         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 197         "bootscript=echo Running bootscript from mmc ...; " \
 198                 "source ${loadaddr}\0" \
 199         "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
 200         "mmcboot=echo Booting from mmc ...; " \
 201                 "run mmcargs; " \
 202                 "bootm ${loadaddr}\0" \
 203         "nandboot=echo Booting from nand ...; " \
 204                 "run nandargs; " \
 205                 "nand read ${loadaddr} 2a0000 400000; " \
 206                 "bootm ${loadaddr}\0" \
 207
 208 #define CONFIG_CMD_BOOTZ
 209 #define CONFIG_BOOTCOMMAND \
 210         "mmc dev ${mmcdev}; if mmc rescan; then " \
 211                 "if run loadbootscript; then " \
 212                         "run bootscript; " \
 213                 "else " \
 214                         "if run loaduimage; then " \
 215                                 "run mmcboot; " \
 216                         "else run nandboot; " \
 217                         "fi; " \
 218                 "fi; " \
 219         "else run nandboot; fi"
 220
 221 /*
 222  * Miscellaneous configurable options
 223  */
 224 #define CONFIG_AUTO_COMPLETE
 225 #define CONFIG_CMDLINE_EDITING
 226 #define CONFIG_TIMESTAMP
 227 #define CONFIG_SYS_AUTOLOAD             "no"
 228 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 229 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
 230 #define CONFIG_SYS_PROMPT               "CM-T3x # "
 231 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 232 /* Print Buffer Size */
 233 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 234                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 235 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 236 /* Boot Argument Buffer Size */
 237 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
 238
 239 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)     /* memtest */
 240                                                                 /* works on */
 241 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
 242                                         0x01F00000) /* 31MB */
 243
 244 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0)     /* default */
 245                                                         /* load address */
 246
 247 /*
 248  * OMAP3 has 12 GP timers, they can be driven by the system clock
 249  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 250  * This rate is divided by a local divisor.
 251  */
 252 #define CONFIG_SYS_TIMERBASE            (OMAP34XX_GPT2)
 253 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 254
 255 /*-----------------------------------------------------------------------
 256  * Physical Memory Map
 257  */
 258 #define CONFIG_NR_DRAM_BANKS    1       /* CS1 is never populated */
 259 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
 260
 261 /*-----------------------------------------------------------------------
 262  * FLASH and environment organization
 263  */
 264
 265 /* **** PISMO SUPPORT *** */
 266 /* Monitor at start of flash */
 267 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 268 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 269
 270 #define CONFIG_ENV_IS_IN_NAND
 271 #define SMNAND_ENV_OFFSET               0x260000 /* environment starts here */
 272 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 273 #define CONFIG_ENV_ADDR                 SMNAND_ENV_OFFSET
 274
 275 #if defined(CONFIG_CMD_NET)
 276 #define CONFIG_SMC911X
 277 #define CONFIG_SMC911X_32_BIT
 278 #define CM_T3X_SMC911X_BASE     0x2C000000
 279 #define SB_T35_SMC911X_BASE     (CM_T3X_SMC911X_BASE + (16 << 20))
 280 #define CONFIG_SMC911X_BASE     CM_T3X_SMC911X_BASE
 281 #endif /* (CONFIG_CMD_NET) */
 282
 283 /* additions for new relocation code, must be added to all boards */
 284 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 285 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 286 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 287 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR +     \
 288                                          CONFIG_SYS_INIT_RAM_SIZE -     \
 289                                          GENERATED_GBL_DATA_SIZE)
 290
 291 /* Status LED */
 292 #define CONFIG_STATUS_LED               /* Status LED enabled */
 293 #define CONFIG_BOARD_SPECIFIC_LED
 294 #define CONFIG_GPIO_LED
 295 #define GREEN_LED_GPIO                  186 /* CM-T35 Green LED is GPIO186 */
 296 #define GREEN_LED_DEV                   0
 297 #define STATUS_LED_BIT                  GREEN_LED_GPIO
 298 #define STATUS_LED_STATE                STATUS_LED_ON
 299 #define STATUS_LED_PERIOD               (CONFIG_SYS_HZ / 2)
 300 #define STATUS_LED_BOOT                 GREEN_LED_DEV
 301
 302 #define CONFIG_SPLASHIMAGE_GUARD
 303
 304 /* GPIO banks */
 305 #ifdef CONFIG_STATUS_LED
 306 #define CONFIG_OMAP3_GPIO_6     /* GPIO186 is in GPIO bank 6  */
 307 #endif
 308
 309 /* Display Configuration */
 310 #define CONFIG_OMAP3_GPIO_2
 311 #define CONFIG_OMAP3_GPIO_5
 312 #define CONFIG_VIDEO_OMAP3
 313 #define LCD_BPP         LCD_COLOR16
 314
 315 #define CONFIG_LCD
 316 #define CONFIG_SPLASH_SCREEN
 317 #define CONFIG_SPLASH_SOURCE
 318 #define CONFIG_CMD_BMP
 319 #define CONFIG_BMP_16BPP
 320 #define CONFIG_SCF0403_LCD
 321
 322 #define CONFIG_OMAP3_SPI
 323
 324 /* Defines for SPL */
 325 #define CONFIG_SPL_FRAMEWORK
 326 #define CONFIG_SPL_NAND_SIMPLE
 327
 328 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 329 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
 330 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 331 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
 332
 333 #define CONFIG_SPL_BOARD_INIT
 334 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 335 #define CONFIG_SPL_LIBDISK_SUPPORT
 336 #define CONFIG_SPL_I2C_SUPPORT
 337 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 338 #define CONFIG_SPL_MMC_SUPPORT
 339 #define CONFIG_SPL_FAT_SUPPORT
 340 #define CONFIG_SPL_SERIAL_SUPPORT
 341 #define CONFIG_SPL_NAND_SUPPORT
 342 #define CONFIG_SPL_NAND_BASE
 343 #define CONFIG_SPL_NAND_DRIVERS
 344 #define CONFIG_SPL_NAND_ECC
 345 #define CONFIG_SPL_GPIO_SUPPORT
 346 #define CONFIG_SPL_POWER_SUPPORT
 347 #define CONFIG_SPL_OMAP3_ID_NAND
 348 #define CONFIG_SPL_LDSCRIPT             "$(CPUDIR)/omap-common/u-boot-spl.lds"
 349
 350 /* NAND boot config */
 351 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 352 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 353 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 354 #define CONFIG_SYS_NAND_OOBSIZE         64
 355 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 356 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 357 /*
 358  * Use the ECC/OOB layout from omap_gpmc.h that matches your chip:
 359  * SP vs LP, 8bit vs 16bit: GPMC_NAND_HW_ECC_LAYOUT
 360  */
 361 #define CONFIG_SYS_NAND_ECCPOS          { 1, 2, 3, 4, 5, 6, 7, 8, 9, \
 362                                          10, 11, 12 }
 363 #define CONFIG_SYS_NAND_ECCSIZE         512
 364 #define CONFIG_SYS_NAND_ECCBYTES        3
 365 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
 366
 367 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 368 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 369
 370 #define CONFIG_SPL_TEXT_BASE            0x40200800
 371 #define CONFIG_SPL_MAX_SIZE             (54 * 1024)     /* 8 KB for stack */
 372
 373 /*
 374  * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
 375  * older x-loader implementations. And move the BSS area so that it
 376  * doesn't overlap with TEXT_BASE.
 377  */
 378 #define CONFIG_SYS_TEXT_BASE            0x80008000
 379 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
 380 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
 381
 382 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
 383 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 384
 385 #endif /* __CONFIG_H */