include/configs/cm_t3517.h

   1 /*
   2  * (C) Copyright 2013 CompuLab, Ltd.
   3  * Author: Igor Grinberg <grinberg@compulab.co.il>
   4  *
   5  * Configuration settings for the CompuLab CM-T3517 board
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 /*
  14  * High Level Configuration Options
  15  */
  16 #define CONFIG_CM_T3517 /* working with CM-T3517 */
  17
  18 #define CONFIG_SYS_TEXT_BASE    0x80008000
  19
  20 /*
  21  * This is needed for the DMA stuff.
  22  * Although the default iss 64, we still define it
  23  * to be on the safe side once the default is changed.
  24  */
  25
  26 #define CONFIG_EMIF4    /* The chip has EMIF4 controller */
  27
  28 #include <asm/arch/cpu.h>               /* get chip and board defs */
  29 #include <asm/arch/omap.h>
  30
  31 #define CONFIG_MACH_TYPE                MACH_TYPE_CM_T3517
  32
  33 /* Clock Defines */
  34 #define V_OSCK                  26000000        /* Clock output from T2 */
  35 #define V_SCLK                  (V_OSCK >> 1)
  36
  37 #define CONFIG_MISC_INIT_R
  38
  39 /*
  40  * The early kernel mapping on ARM currently only maps from the base of DRAM
  41  * to the end of the kernel image.  The kernel is loaded at DRAM base + 0x8000.
  42  * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000,
  43  * so that leaves DRAM base to DRAM base + 0x4000 available.
  44  */
  45 #define CONFIG_SYS_BOOTMAPSZ            0x4000
  46
  47 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  48 #define CONFIG_SETUP_MEMORY_TAGS
  49 #define CONFIG_INITRD_TAG
  50 #define CONFIG_REVISION_TAG
  51 #define CONFIG_SERIAL_TAG
  52
  53 /*
  54  * Size of malloc() pool
  55  */
  56 #define CONFIG_ENV_SIZE         (128 << 10)     /* 128 KiB */
  57 #define CONFIG_SYS_MALLOC_LEN   (CONFIG_ENV_SIZE + (128 << 10))
  58
  59 /*
  60  * Hardware drivers
  61  */
  62
  63 /*
  64  * NS16550 Configuration
  65  */
  66 #define CONFIG_SYS_NS16550_SERIAL
  67 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  68 #define CONFIG_SYS_NS16550_CLK          48000000        /* 48MHz (APLL96/2) */
  69
  70 /*
  71  * select serial console configuration
  72  */
  73 #define CONFIG_CONS_INDEX               3
  74 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  75 #define CONFIG_SERIAL3                  3       /* UART3 */
  76
  77 /* allow to overwrite serial and ethaddr */
  78 #define CONFIG_ENV_OVERWRITE
  79 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
  80                                         115200}
  81
  82 /* USB */
  83 #define CONFIG_USB_MUSB_AM35X
  84
  85 #ifndef CONFIG_USB_MUSB_AM35X
  86 #define CONFIG_USB_OMAP3
  87 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146
  88 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147
  89 #else /* !CONFIG_USB_MUSB_AM35X */
  90 #define CONFIG_USB_MUSB_PIO_ONLY
  91 #endif /* CONFIG_USB_MUSB_AM35X */
  92
  93 /* commands to include */
  94 #define CONFIG_CMD_MTDPARTS     /* Enable MTD parts commands */
  95 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
  96 #define CONFIG_MTD_PARTITIONS
  97 #define MTDIDS_DEFAULT          "nand0=nand"
  98 #define MTDPARTS_DEFAULT        "mtdparts=nand:512k(x-loader),"\
  99                                 "1920k(u-boot),256k(u-boot-env),"\
 100                                 "4m(kernel),-(fs)"
 101
 102 #define CONFIG_CMD_NAND         /* NAND support                 */
 103
 104 #define CONFIG_SYS_I2C
 105 #define CONFIG_SYS_OMAP24_I2C_SPEED     400000
 106 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
 107 #define CONFIG_SYS_I2C_OMAP34XX
 108 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 109 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 110 #define CONFIG_SYS_I2C_EEPROM_BUS       0
 111 #define CONFIG_I2C_MULTI_BUS
 112
 113 /*
 114  * Board NAND Info.
 115  */
 116 #define CONFIG_NAND_OMAP_GPMC
 117 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
 118                                                         /* to access nand */
 119 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
 120                                                         /* to access nand at */
 121                                                         /* CS0 */
 122 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of NAND */
 123                                                         /* devices */
 124
 125 /* Environment information */
 126 #define CONFIG_EXTRA_ENV_SETTINGS \
 127         "loadaddr=0x82000000\0" \
 128         "baudrate=115200\0" \
 129         "console=ttyO2,115200n8\0" \
 130         "netretry=yes\0" \
 131         "mpurate=auto\0" \
 132         "vram=12M\0" \
 133         "dvimode=1024x768MR-16@60\0" \
 134         "defaultdisplay=dvi\0" \
 135         "mmcdev=0\0" \
 136         "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
 137         "mmcrootfstype=ext4\0" \
 138         "nandroot=/dev/mtdblock4 rw\0" \
 139         "nandrootfstype=ubifs\0" \
 140         "mmcargs=setenv bootargs console=${console} " \
 141                 "mpurate=${mpurate} " \
 142                 "vram=${vram} " \
 143                 "omapfb.mode=dvi:${dvimode} " \
 144                 "omapdss.def_disp=${defaultdisplay} " \
 145                 "root=${mmcroot} " \
 146                 "rootfstype=${mmcrootfstype}\0" \
 147         "nandargs=setenv bootargs console=${console} " \
 148                 "mpurate=${mpurate} " \
 149                 "vram=${vram} " \
 150                 "omapfb.mode=dvi:${dvimode} " \
 151                 "omapdss.def_disp=${defaultdisplay} " \
 152                 "root=${nandroot} " \
 153                 "rootfstype=${nandrootfstype}\0" \
 154         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 155         "bootscript=echo Running bootscript from mmc ...; " \
 156                 "source ${loadaddr}\0" \
 157         "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
 158         "mmcboot=echo Booting from mmc ...; " \
 159                 "run mmcargs; " \
 160                 "bootm ${loadaddr}\0" \
 161         "nandboot=echo Booting from nand ...; " \
 162                 "run nandargs; " \
 163                 "nand read ${loadaddr} 2a0000 400000; " \
 164                 "bootm ${loadaddr}\0" \
 165
 166 #define CONFIG_BOOTCOMMAND \
 167         "mmc dev ${mmcdev}; if mmc rescan; then " \
 168                 "if run loadbootscript; then " \
 169                         "run bootscript; " \
 170                 "else " \
 171                         "if run loaduimage; then " \
 172                                 "run mmcboot; " \
 173                         "else run nandboot; " \
 174                         "fi; " \
 175                 "fi; " \
 176         "else run nandboot; fi"
 177
 178 /*
 179  * Miscellaneous configurable options
 180  */
 181 #define CONFIG_AUTO_COMPLETE
 182 #define CONFIG_CMDLINE_EDITING
 183 #define CONFIG_TIMESTAMP
 184 #define CONFIG_SYS_AUTOLOAD             "no"
 185 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 186 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 187 /* Print Buffer Size */
 188 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 189                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 190 #define CONFIG_SYS_MAXARGS              32      /* max number of command args */
 191 /* Boot Argument Buffer Size */
 192 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
 193
 194 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0 + 0x02000000)
 195
 196 /*
 197  * AM3517 has 12 GP timers, they can be driven by the system clock
 198  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 199  * This rate is divided by a local divisor.
 200  */
 201 #define CONFIG_SYS_TIMERBASE            (OMAP34XX_GPT2)
 202 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 203 #define CONFIG_SYS_HZ                   1000
 204
 205 /*-----------------------------------------------------------------------
 206  * Physical Memory Map
 207  */
 208 #define CONFIG_NR_DRAM_BANKS    1       /* CM-T3517 DRAM is only on CS0 */
 209 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
 210 #define CONFIG_SYS_CS0_SIZE             (256 << 20)
 211
 212 /*-----------------------------------------------------------------------
 213  * FLASH and environment organization
 214  */
 215
 216 /* **** PISMO SUPPORT *** */
 217 /* Monitor at start of flash */
 218 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 219 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 220
 221 #define CONFIG_ENV_IS_IN_NAND
 222 #define SMNAND_ENV_OFFSET               0x260000 /* environment starts here */
 223 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 224 #define CONFIG_ENV_ADDR                 SMNAND_ENV_OFFSET
 225
 226 #if defined(CONFIG_CMD_NET)
 227 #define CONFIG_DRIVER_TI_EMAC
 228 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
 229 #define CONFIG_MII
 230 #define CONFIG_SMC911X
 231 #define CONFIG_SMC911X_32_BIT
 232 #define CONFIG_SMC911X_BASE     (0x2C000000 + (16 << 20))
 233 #define CONFIG_ARP_TIMEOUT              200UL
 234 #define CONFIG_NET_RETRY_COUNT          5
 235 #endif /* CONFIG_CMD_NET */
 236
 237 /* additions for new relocation code, must be added to all boards */
 238 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 239 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 240 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 241 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR +     \
 242                                          CONFIG_SYS_INIT_RAM_SIZE -     \
 243                                          GENERATED_GBL_DATA_SIZE)
 244
 245 /* Status LED */
 246 #define GREEN_LED_GPIO                  186 /* CM-T3517 Green LED is GPIO186 */
 247
 248 /* Display Configuration */
 249 #define CONFIG_VIDEO_OMAP3
 250 #define LCD_BPP         LCD_COLOR16
 251
 252 #define CONFIG_SPLASH_SCREEN
 253 #define CONFIG_SPLASHIMAGE_GUARD
 254 #define CONFIG_BMP_16BPP
 255 #define CONFIG_SCF0403_LCD
 256
 257 #define CONFIG_OMAP3_SPI
 258
 259 /* EEPROM */
 260 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 261 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 262 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       4
 263 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 264 #define CONFIG_SYS_EEPROM_SIZE                  256
 265
 266 #endif /* __CONFIG_H */