include/configs/cm_t3517.h

   1 /*
   2  * (C) Copyright 2013 CompuLab, Ltd.
   3  * Author: Igor Grinberg <grinberg@compulab.co.il>
   4  *
   5  * Configuration settings for the CompuLab CM-T3517 board
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 /*
  14  * High Level Configuration Options
  15  */
  16 #define CONFIG_OMAP     /* in a TI OMAP core */
  17 #define CONFIG_CM_T3517 /* working with CM-T3517 */
  18 /* Common ARM Erratas */
  19 #define CONFIG_ARM_ERRATA_454179
  20 #define CONFIG_ARM_ERRATA_430973
  21 #define CONFIG_ARM_ERRATA_621766
  22
  23 #define CONFIG_SYS_TEXT_BASE    0x80008000
  24
  25 /*
  26  * This is needed for the DMA stuff.
  27  * Although the default iss 64, we still define it
  28  * to be on the safe side once the default is changed.
  29  */
  30
  31 #define CONFIG_EMIF4    /* The chip has EMIF4 controller */
  32
  33 #include <asm/arch/cpu.h>               /* get chip and board defs */
  34 #include <asm/arch/omap.h>
  35
  36 #define CONFIG_MACH_TYPE                MACH_TYPE_CM_T3517
  37
  38 /* Clock Defines */
  39 #define V_OSCK                  26000000        /* Clock output from T2 */
  40 #define V_SCLK                  (V_OSCK >> 1)
  41
  42 #define CONFIG_MISC_INIT_R
  43
  44 /*
  45  * The early kernel mapping on ARM currently only maps from the base of DRAM
  46  * to the end of the kernel image.  The kernel is loaded at DRAM base + 0x8000.
  47  * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000,
  48  * so that leaves DRAM base to DRAM base + 0x4000 available.
  49  */
  50 #define CONFIG_SYS_BOOTMAPSZ            0x4000
  51
  52 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  53 #define CONFIG_SETUP_MEMORY_TAGS
  54 #define CONFIG_INITRD_TAG
  55 #define CONFIG_REVISION_TAG
  56 #define CONFIG_SERIAL_TAG
  57
  58 /*
  59  * Size of malloc() pool
  60  */
  61 #define CONFIG_ENV_SIZE         (128 << 10)     /* 128 KiB */
  62 #define CONFIG_SYS_MALLOC_LEN   (CONFIG_ENV_SIZE + (128 << 10))
  63
  64 /*
  65  * Hardware drivers
  66  */
  67
  68 /*
  69  * NS16550 Configuration
  70  */
  71 #define CONFIG_SYS_NS16550_SERIAL
  72 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  73 #define CONFIG_SYS_NS16550_CLK          48000000        /* 48MHz (APLL96/2) */
  74
  75 /*
  76  * select serial console configuration
  77  */
  78 #define CONFIG_CONS_INDEX               3
  79 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  80 #define CONFIG_SERIAL3                  3       /* UART3 */
  81
  82 /* allow to overwrite serial and ethaddr */
  83 #define CONFIG_ENV_OVERWRITE
  84 #define CONFIG_BAUDRATE                 115200
  85 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
  86                                         115200}
  87
  88 #define CONFIG_OMAP_GPIO
  89
  90 /* USB */
  91 #define CONFIG_USB_MUSB_AM35X
  92
  93 #ifndef CONFIG_USB_MUSB_AM35X
  94 #define CONFIG_USB_OMAP3
  95 #define CONFIG_USB_EHCI
  96 #define CONFIG_USB_EHCI_OMAP
  97 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146
  98 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147
  99 #else /* !CONFIG_USB_MUSB_AM35X */
 100 #define CONFIG_USB_MUSB_PIO_ONLY
 101 #endif /* CONFIG_USB_MUSB_AM35X */
 102
 103 /* commands to include */
 104 #define CONFIG_CMD_MTDPARTS     /* Enable MTD parts commands */
 105 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
 106 #define CONFIG_MTD_PARTITIONS
 107 #define MTDIDS_DEFAULT          "nand0=nand"
 108 #define MTDPARTS_DEFAULT        "mtdparts=nand:512k(x-loader),"\
 109                                 "1920k(u-boot),256k(u-boot-env),"\
 110                                 "4m(kernel),-(fs)"
 111
 112 #define CONFIG_CMD_NAND         /* NAND support                 */
 113
 114 #define CONFIG_SYS_NO_FLASH
 115 #define CONFIG_SYS_I2C
 116 #define CONFIG_SYS_OMAP24_I2C_SPEED     400000
 117 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
 118 #define CONFIG_SYS_I2C_OMAP34XX
 119 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 120 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 121 #define CONFIG_SYS_I2C_EEPROM_BUS       0
 122 #define CONFIG_I2C_MULTI_BUS
 123
 124 /*
 125  * Board NAND Info.
 126  */
 127 #define CONFIG_NAND_OMAP_GPMC
 128 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
 129                                                         /* to access nand */
 130 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
 131                                                         /* to access nand at */
 132                                                         /* CS0 */
 133 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of NAND */
 134                                                         /* devices */
 135
 136 /* Environment information */
 137 #define CONFIG_EXTRA_ENV_SETTINGS \
 138         "loadaddr=0x82000000\0" \
 139         "baudrate=115200\0" \
 140         "console=ttyO2,115200n8\0" \
 141         "netretry=yes\0" \
 142         "mpurate=auto\0" \
 143         "vram=12M\0" \
 144         "dvimode=1024x768MR-16@60\0" \
 145         "defaultdisplay=dvi\0" \
 146         "mmcdev=0\0" \
 147         "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
 148         "mmcrootfstype=ext4\0" \
 149         "nandroot=/dev/mtdblock4 rw\0" \
 150         "nandrootfstype=ubifs\0" \
 151         "mmcargs=setenv bootargs console=${console} " \
 152                 "mpurate=${mpurate} " \
 153                 "vram=${vram} " \
 154                 "omapfb.mode=dvi:${dvimode} " \
 155                 "omapdss.def_disp=${defaultdisplay} " \
 156                 "root=${mmcroot} " \
 157                 "rootfstype=${mmcrootfstype}\0" \
 158         "nandargs=setenv bootargs console=${console} " \
 159                 "mpurate=${mpurate} " \
 160                 "vram=${vram} " \
 161                 "omapfb.mode=dvi:${dvimode} " \
 162                 "omapdss.def_disp=${defaultdisplay} " \
 163                 "root=${nandroot} " \
 164                 "rootfstype=${nandrootfstype}\0" \
 165         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 166         "bootscript=echo Running bootscript from mmc ...; " \
 167                 "source ${loadaddr}\0" \
 168         "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
 169         "mmcboot=echo Booting from mmc ...; " \
 170                 "run mmcargs; " \
 171                 "bootm ${loadaddr}\0" \
 172         "nandboot=echo Booting from nand ...; " \
 173                 "run nandargs; " \
 174                 "nand read ${loadaddr} 2a0000 400000; " \
 175                 "bootm ${loadaddr}\0" \
 176
 177 #define CONFIG_BOOTCOMMAND \
 178         "mmc dev ${mmcdev}; if mmc rescan; then " \
 179                 "if run loadbootscript; then " \
 180                         "run bootscript; " \
 181                 "else " \
 182                         "if run loaduimage; then " \
 183                                 "run mmcboot; " \
 184                         "else run nandboot; " \
 185                         "fi; " \
 186                 "fi; " \
 187         "else run nandboot; fi"
 188
 189 /*
 190  * Miscellaneous configurable options
 191  */
 192 #define CONFIG_AUTO_COMPLETE
 193 #define CONFIG_CMDLINE_EDITING
 194 #define CONFIG_TIMESTAMP
 195 #define CONFIG_SYS_AUTOLOAD             "no"
 196 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 197 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 198 /* Print Buffer Size */
 199 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 200                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 201 #define CONFIG_SYS_MAXARGS              32      /* max number of command args */
 202 /* Boot Argument Buffer Size */
 203 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
 204
 205 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0 + 0x02000000)
 206
 207 /*
 208  * AM3517 has 12 GP timers, they can be driven by the system clock
 209  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 210  * This rate is divided by a local divisor.
 211  */
 212 #define CONFIG_SYS_TIMERBASE            (OMAP34XX_GPT2)
 213 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 214 #define CONFIG_SYS_HZ                   1000
 215
 216 /*-----------------------------------------------------------------------
 217  * Physical Memory Map
 218  */
 219 #define CONFIG_NR_DRAM_BANKS    1       /* CM-T3517 DRAM is only on CS0 */
 220 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
 221 #define CONFIG_SYS_CS0_SIZE             (256 << 20)
 222
 223 /*-----------------------------------------------------------------------
 224  * FLASH and environment organization
 225  */
 226
 227 /* **** PISMO SUPPORT *** */
 228 /* Monitor at start of flash */
 229 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 230 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 231
 232 #define CONFIG_ENV_IS_IN_NAND
 233 #define SMNAND_ENV_OFFSET               0x260000 /* environment starts here */
 234 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 235 #define CONFIG_ENV_ADDR                 SMNAND_ENV_OFFSET
 236
 237 #if defined(CONFIG_CMD_NET)
 238 #define CONFIG_DRIVER_TI_EMAC
 239 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
 240 #define CONFIG_MII
 241 #define CONFIG_SMC911X
 242 #define CONFIG_SMC911X_32_BIT
 243 #define CONFIG_SMC911X_BASE     (0x2C000000 + (16 << 20))
 244 #define CONFIG_ARP_TIMEOUT              200UL
 245 #define CONFIG_NET_RETRY_COUNT          5
 246 #endif /* CONFIG_CMD_NET */
 247
 248 /* additions for new relocation code, must be added to all boards */
 249 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 250 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 251 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 252 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR +     \
 253                                          CONFIG_SYS_INIT_RAM_SIZE -     \
 254                                          GENERATED_GBL_DATA_SIZE)
 255
 256 /* Status LED */
 257 #define GREEN_LED_GPIO                  186 /* CM-T3517 Green LED is GPIO186 */
 258
 259 /* GPIO banks */
 260 #ifdef CONFIG_LED_STATUS
 261 #define CONFIG_OMAP3_GPIO_6     /* GPIO186 is in GPIO bank 6  */
 262 #endif
 263
 264 /* Display Configuration */
 265 #define CONFIG_OMAP3_GPIO_2
 266 #define CONFIG_OMAP3_GPIO_5
 267 #define CONFIG_VIDEO_OMAP3
 268 #define LCD_BPP         LCD_COLOR16
 269
 270 #define CONFIG_SPLASH_SCREEN
 271 #define CONFIG_SPLASHIMAGE_GUARD
 272 #define CONFIG_CMD_BMP
 273 #define CONFIG_BMP_16BPP
 274 #define CONFIG_SCF0403_LCD
 275
 276 #define CONFIG_OMAP3_SPI
 277
 278 /* EEPROM */
 279 #define CONFIG_CMD_EEPROM
 280 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 281 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 282 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       4
 283 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 284 #define CONFIG_SYS_EEPROM_SIZE                  256
 285
 286 #define CONFIG_CMD_EEPROM_LAYOUT
 287 #define CONFIG_EEPROM_LAYOUT_HELP_STRING "v1, v2, v3"
 288
 289 #endif /* __CONFIG_H */