include/configs/cmi_mpc5xx.h

   1 /*
   2  * (C) Copyright 2003
   3  * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation,
  21  */
  22
  23 /*
  24  * File:                cmi_mpc5xx.h
  25  *
  26  * Discription:         Config header file for cmi
  27  *                      board  using an MPC5xx CPU
  28  *
  29  */
  30
  31 #ifndef __CONFIG_H
  32 #define __CONFIG_H
  33
  34 /*
  35  * High Level Configuration Options
  36  */
  37
  38 #define CONFIG_MPC555           1               /* This is an MPC555 CPU                */
  39 #define CONFIG_CMI              1               /* Using the customized cmi board       */
  40
  41 /* Serial Console Configuration */
  42 #define CONFIG_5xx_CONS_SCI1
  43 #undef  CONFIG_5xx_CONS_SCI2
  44
  45 #define CONFIG_BAUDRATE         57600
  46
  47
  48 /*
  49  * BOOTP options
  50  */
  51 #define CONFIG_BOOTP_BOOTFILESIZE
  52 #define CONFIG_BOOTP_BOOTPATH
  53 #define CONFIG_BOOTP_GATEWAY
  54 #define CONFIG_BOOTP_HOSTNAME
  55
  56
  57 /*
  58  * Command line configuration.
  59  */
  60 #include <config_cmd_default.h>
  61
  62 #undef  CONFIG_CMD_NET          /* disabeled - causes compile errors */
  63
  64 #define CONFIG_CMD_MEMORY
  65 #define CONFIG_CMD_LOADB
  66 #define CONFIG_CMD_REGINFO
  67 #define CONFIG_CMD_FLASH
  68 #define CONFIG_CMD_LOADS
  69 #define CONFIG_CMD_ASKENV
  70 #define CONFIG_CMD_BDI
  71 #define CONFIG_CMD_CONSOLE
  72 #define CONFIG_CMD_SAVEENV
  73 #define CONFIG_CMD_RUN
  74 #define CONFIG_CMD_IMI
  75
  76
  77 #if 0
  78 #define CONFIG_BOOTDELAY        -1              /* autoboot disabled                    */
  79 #else
  80 #define CONFIG_BOOTDELAY        5               /* autoboot after 5 seconds             */
  81 #endif
  82 #define CONFIG_BOOTCOMMAND      "go 02034004"   /* autoboot command                     */
  83
  84 #define CONFIG_BOOTARGS         ""              /* Assuming OS Image in 4 flash sector at offset 4004 */
  85
  86 #define CONFIG_WATCHDOG                         /* turn on platform specific watchdog   */
  87
  88 #define CONFIG_STATUS_LED       1               /* Enable status led */
  89
  90 #define CONFIG_LOADS_ECHO       1               /* Echo on for serial download */
  91
  92 /*
  93  * Miscellaneous configurable options
  94  */
  95
  96 #define CONFIG_SYS_LONGHELP                             /* undef to save memory         */
  97 #define CONFIG_SYS_PROMPT               "=> "           /* Monitor Command Prompt       */
  98 #if defined(CONFIG_CMD_KGDB)
  99 #define CONFIG_SYS_CBSIZE               1024            /* Console I/O Buffer Size      */
 100 #else
 101 #define CONFIG_SYS_CBSIZE               256             /* Console I/O Buffer Size      */
 102 #endif
 103 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 104 #define CONFIG_SYS_MAXARGS              16             /* max number of command args    */
 105 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 106
 107 #define CONFIG_SYS_MEMTEST_START        0x00000000      /* memtest works on             */
 108 #define CONFIG_SYS_MEMTEST_END          0x000fa000      /* 1 MB in SRAM                 */
 109
 110 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address         */
 111
 112 #define CONFIG_SYS_HZ                   1000            /* Decrementer freq: 1 ms ticks */
 113
 114 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200, 1250000 }
 115
 116
 117 /*
 118  * Low Level Configuration Settings
 119  */
 120
 121 /*
 122  * Internal Memory Mapped (This is not the IMMR content)
 123  */
 124 #define CONFIG_SYS_IMMR         0x01000000              /* Physical start adress of internal memory map */
 125
 126 /*
 127  * Definitions for initial stack pointer and data area
 128  */
 129 #define CONFIG_SYS_INIT_RAM_ADDR        (CONFIG_SYS_IMMR + 0x003f9800)  /* Physical start adress of internal MPC555 writable RAM */
 130 #define CONFIG_SYS_INIT_RAM_END (CONFIG_SYS_IMMR + 0x003fffff)  /* Physical end adress of internal MPC555 used RAM area */
 131 #define CONFIG_SYS_GBL_DATA_SIZE        64                      /* Size in bytes reserved for initial global data */
 132 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_RAM_ADDR) - CONFIG_SYS_GBL_DATA_SIZE) /* Offset from the beginning of ram */
 133 #define CONFIG_SYS_INIT_SP_ADDR 0x013fa000              /* Physical start adress of inital stack */
 134
 135 /*
 136  * Start addresses for the final memory configuration
 137  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 138  */
 139 #define CONFIG_SYS_SDRAM_BASE           0x00000000      /* Monitor won't change memory map                      */
 140 #define CONFIG_SYS_FLASH_BASE           0x02000000      /* External flash */
 141 #define PLD_BASE                0x03000000      /* PLD  */
 142 #define ANYBUS_BASE             0x03010000      /* Anybus Module */
 143
 144 #define CONFIG_SYS_RESET_ADRESS 0x01000000      /* Adress which causes reset */
 145 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE   /* CONFIG_SYS_TEXT_BASE is defined in the board config.mk file. */
 146                                                 /* This adress is given to the linker with -Ttext to    */
 147                                                 /* locate the text section at this adress.              */
 148 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)     /* Reserve 192 kB for Monitor                           */
 149 #define CONFIG_SYS_MALLOC_LEN           (64 << 10)      /* Reserve 128 kB for malloc()                          */
 150
 151 /*
 152  * For booting Linux, the board info and command line data
 153  * have to be in the first 8 MB of memory, since this is
 154  * the maximum mapped by the Linux kernel during initialization.
 155  */
 156 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux         */
 157
 158
 159 /*-----------------------------------------------------------------------
 160  * FLASH organization
 161  *-----------------------------------------------------------------------
 162  *
 163  */
 164
 165 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* Max number of memory banks           */
 166 #define CONFIG_SYS_MAX_FLASH_SECT       64              /* Max number of sectors on one chip    */
 167 #define CONFIG_SYS_FLASH_ERASE_TOUT     180000          /* Timeout for Flash Erase (in ms)      */
 168 #define CONFIG_SYS_FLASH_WRITE_TOUT     600             /* Timeout for Flash Write (in ms)      */
 169 #define CONFIG_SYS_FLASH_PROTECTION    1                /* Physically section protection on     */
 170
 171 #define CONFIG_ENV_IS_IN_FLASH  1
 172
 173 #ifdef  CONFIG_ENV_IS_IN_FLASH
 174 #define CONFIG_ENV_OFFSET               0x00020000      /* Environment starts at this adress    */
 175 #define CONFIG_ENV_SIZE         0x00010000      /* Set whole sector as env              */
 176 #define CONFIG_SYS_USE_PPCENV                           /* Environment embedded in sect .ppcenv */
 177 #endif
 178
 179 /*-----------------------------------------------------------------------
 180  * SYPCR - System Protection Control
 181  * SYPCR can only be written once after reset!
 182  *-----------------------------------------------------------------------
 183  * SW Watchdog freeze
 184  */
 185 #if defined(CONFIG_WATCHDOG)
 186 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 187                          SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
 188 #else
 189 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 190                          SYPCR_SWP)
 191 #endif  /* CONFIG_WATCHDOG */
 192
 193 /*-----------------------------------------------------------------------
 194  * TBSCR - Time Base Status and Control
 195  *-----------------------------------------------------------------------
 196  * Clear Reference Interrupt Status, Timebase freezing enabled
 197  */
 198 #define CONFIG_SYS_TBSCR        (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 199
 200 /*-----------------------------------------------------------------------
 201  * PISCR - Periodic Interrupt Status and Control
 202  *-----------------------------------------------------------------------
 203  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 204  */
 205 #define CONFIG_SYS_PISCR        (PISCR_PITF)
 206
 207 /*-----------------------------------------------------------------------
 208  * SCCR - System Clock and reset Control Register
 209  *-----------------------------------------------------------------------
 210  * Set clock output, timebase and RTC source and divider,
 211  * power management and some other internal clocks
 212  */
 213 #define SCCR_MASK       SCCR_EBDF00
 214 #define CONFIG_SYS_SCCR (SCCR_TBS     | SCCR_RTDIV    | SCCR_RTSEL    | \
 215                          SCCR_COM00   | SCCR_DFNL000 | SCCR_DFNH000)
 216
 217 /*-----------------------------------------------------------------------
 218  * SIUMCR - SIU Module Configuration
 219  *-----------------------------------------------------------------------
 220  * Data show cycle
 221  */
 222 #define CONFIG_SYS_SIUMCR       (SIUMCR_DBGC00)         /* Disable data show cycle      */
 223
 224 /*-----------------------------------------------------------------------
 225  * PLPRCR - PLL, Low-Power, and Reset Control Register
 226  *-----------------------------------------------------------------------
 227  * Set all bits to 40 Mhz
 228  *
 229  */
 230 #define CONFIG_SYS_OSC_CLK      ((uint)4000000)         /* Oscillator clock is 4MHz     */
 231 #define CONFIG_SYS_PLPRCR       (PLPRCR_MF_9 | PLPRCR_DIVF_0)
 232
 233
 234 /*-----------------------------------------------------------------------
 235  * UMCR - UIMB Module Configuration Register
 236  *-----------------------------------------------------------------------
 237  *
 238  */
 239 #define CONFIG_SYS_UMCR (UMCR_FSPEED)           /* IMB clock same as U-bus      */
 240
 241 /*-----------------------------------------------------------------------
 242  * ICTRL - I-Bus Support Control Register
 243  */
 244 #define CONFIG_SYS_ICTRL        (ICTRL_ISCT_SER_7)      /* Take out of serialized mode  */
 245
 246 /*-----------------------------------------------------------------------
 247  * USIU - Memory Controller Register
 248  *-----------------------------------------------------------------------
 249  */
 250
 251 #define CONFIG_SYS_BR0_PRELIM           (CONFIG_SYS_FLASH_BASE | BR_V | BR_BI | BR_PS_16)
 252 #define CONFIG_SYS_OR0_PRELIM           (OR_ADDR_MK_FF | OR_SCY_3)
 253 #define CONFIG_SYS_BR1_PRELIM           (ANYBUS_BASE)
 254 #define CONFIG_SYS_OR1_PRELIM           (OR_ADDR_MK_FFFF | OR_SCY_1 | OR_ETHR)
 255 #define CONFIG_SYS_BR2_PRELIM           (CONFIG_SYS_SDRAM_BASE | BR_V | BR_PS_32)
 256 #define CONFIG_SYS_OR2_PRELIM           (OR_ADDR_MK_FF)
 257 #define CONFIG_SYS_BR3_PRELIM           (PLD_BASE | BR_V | BR_BI | BR_LBDIR | BR_PS_8)
 258 #define CONFIG_SYS_OR3_PRELIM           (OR_ADDR_MK_FF | OR_TRLX | OR_BSCY | OR_SCY_8 | \
 259                                  OR_ACS_10 | OR_ETHR | OR_CSNT)
 260
 261 #define FLASH_BASE0_PRELIM      CONFIG_SYS_FLASH_BASE   /* We don't realign the flash   */
 262
 263 /*-----------------------------------------------------------------------
 264  * DER - Timer Decrementer
 265  *-----------------------------------------------------------------------
 266  * Initialise to zero
 267  */
 268 #define CONFIG_SYS_DER                  0x00000000
 269
 270
 271 /*
 272  * Internal Definitions
 273  *
 274  * Boot Flags
 275  */
 276 #define BOOTFLAG_COLD   0x01                    /* Normal Power-On: Boot from FLASH     */
 277 #define BOOTFLAG_WARM   0x02                    /* Software reboot                      */
 278
 279 #endif  /* __CONFIG_H */