include/configs/colibri_vf.h

   1 /*
   2  * Copyright 2015 Toradex, Inc.
   3  *
   4  * Configuration settings for the Toradex VF50/VF61 module.
   5  *
   6  * Based on vf610twr.h:
   7  * Copyright 2013 Freescale Semiconductor, Inc.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #define CONFIG_SYS_CACHELINE_SIZE       32
  16
  17 #include <asm/arch/imx-regs.h>
  18
  19 #define CONFIG_VF610
  20 #define CONFIG_SYS_THUMB_BUILD
  21 #define CONFIG_USE_ARCH_MEMCPY
  22 #define CONFIG_USE_ARCH_MEMSET
  23 #define CONFIG_SYS_FSL_CLK
  24
  25 #define CONFIG_ARCH_MISC_INIT
  26 #define CONFIG_DISPLAY_CPUINFO
  27 #define CONFIG_DISPLAY_BOARDINFO
  28
  29 #define CONFIG_SKIP_LOWLEVEL_INIT
  30
  31 #define CONFIG_CMD_FUSE
  32 #ifdef CONFIG_CMD_FUSE
  33 #define CONFIG_MXC_OCOTP
  34 #endif
  35
  36 /* Size of malloc() pool */
  37 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  38
  39 #define CONFIG_BOARD_EARLY_INIT_F
  40
  41 /* Allow to overwrite serial and ethaddr */
  42 #define CONFIG_ENV_OVERWRITE
  43 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  44 #define CONFIG_VERSION_VARIABLE
  45 #define CONFIG_BAUDRATE                 115200
  46
  47 /* NAND support */
  48 #define CONFIG_CMD_NAND
  49 #define CONFIG_SYS_NAND_ONFI_DETECTION
  50 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  51 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR
  52
  53 /* Dynamic MTD partition support */
  54 #define CONFIG_CMD_MTDPARTS     /* Enable 'mtdparts' command line support */
  55 #define CONFIG_MTD_PARTITIONS
  56 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
  57 #define MTDIDS_DEFAULT          "nand0=vf610_nfc"
  58 #define MTDPARTS_DEFAULT        "mtdparts=vf610_nfc:"           \
  59                                 "128k(vf-bcb)ro,"               \
  60                                 "1408k(u-boot)ro,"              \
  61                                 "512k(u-boot-env),"             \
  62                                 "-(ubi)"
  63
  64 #define CONFIG_MMC
  65 #define CONFIG_FSL_ESDHC
  66 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  67 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  68
  69 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
  70
  71 #define CONFIG_GENERIC_MMC
  72 #define CONFIG_DOS_PARTITION
  73
  74 #define CONFIG_RBTREE
  75 #define CONFIG_LZO
  76 #define CONFIG_CMD_UBI
  77 #define CONFIG_MTD_UBI_FASTMAP
  78 #define CONFIG_CMD_UBIFS        /* increases size by almost 60 KB */
  79
  80 #define CONFIG_FEC_MXC
  81 #define CONFIG_MII
  82 #define IMX_FEC_BASE                    ENET1_BASE_ADDR
  83 #define CONFIG_FEC_XCV_TYPE             RMII
  84 #define CONFIG_FEC_MXC_PHYADDR          0
  85 #define CONFIG_PHYLIB
  86 #define CONFIG_PHY_MICREL
  87
  88 #define CONFIG_IPADDR           192.168.10.2
  89 #define CONFIG_NETMASK          255.255.255.0
  90 #define CONFIG_SERVERIP         192.168.10.1
  91
  92 #define CONFIG_BOOTDELAY                1
  93 #define CONFIG_BOARD_LATE_INIT
  94
  95 #define CONFIG_LOADADDR                 0x80008000
  96 #define CONFIG_FDTADDR                  0x84000000
  97
  98 /* We boot from the gfxRAM area of the OCRAM. */
  99 #define CONFIG_SYS_TEXT_BASE            0x3f408000
 100 #define CONFIG_BOARD_SIZE_LIMIT         524288
 101
 102 #define SD_BOOTCMD \
 103         "sdargs=root=/dev/mmcblk0p2 rw rootwait\0"      \
 104         "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
 105         "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
 106         "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
 107         "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
 108         "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 109
 110 #define NFS_BOOTCMD \
 111         "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
 112         "nfsboot=run setup; " \
 113         "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
 114         "${setupargs} ${vidargs}; echo Booting from NFS...;" \
 115         "dhcp ${kernel_addr_r} && "     \
 116         "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
 117         "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 118
 119 #define UBI_BOOTCMD     \
 120         "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
 121         "ubi.fm_autoconvert=1\0" \
 122         "ubiboot=run setup; " \
 123         "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
 124         "${setupargs} ${vidargs}; echo Booting from NAND...; " \
 125         "ubi part ubi && ubifsmount ubi0:rootfs && " \
 126         "ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
 127         "ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
 128         "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 129
 130 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
 131
 132 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
 133
 134 #define CONFIG_EXTRA_ENV_SETTINGS \
 135         "kernel_addr_r=0x82000000\0" \
 136         "fdt_addr_r=0x84000000\0" \
 137         "kernel_file=zImage\0" \
 138         "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
 139         "fdt_board=eval-v3\0" \
 140         "defargs=\0" \
 141         "console=ttyLP0\0" \
 142         "setup=setenv setupargs " \
 143         "console=tty1 console=${console}" \
 144         ",${baudrate}n8 ${memargs}\0" \
 145         "setsdupdate=mmc rescan && set interface mmc && " \
 146         "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 147         "source ${loadaddr}\0" \
 148         "setusbupdate=usb start && set interface usb && " \
 149         "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 150         "source ${loadaddr}\0" \
 151         "setupdate=run setsdupdate || run setusbupdate\0" \
 152         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 153         "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 154         SD_BOOTCMD \
 155         NFS_BOOTCMD \
 156         UBI_BOOTCMD
 157
 158 /* Miscellaneous configurable options */
 159 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 160 #undef CONFIG_AUTO_COMPLETE
 161 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 162 #define CONFIG_SYS_PBSIZE               \
 163                         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 164 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 165 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 166
 167 #define CONFIG_SYS_MEMTEST_START        0x80010000
 168 #define CONFIG_SYS_MEMTEST_END          0x87C00000
 169
 170 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 171 #define CONFIG_SYS_HZ                   1000
 172 #define CONFIG_CMDLINE_EDITING
 173
 174 /*
 175  * Stack sizes
 176  * The stack sizes are set up in start.S using the settings below
 177  */
 178 #define CONFIG_STACKSIZE                (128 * 1024)    /* regular stack */
 179
 180 /* Physical memory map */
 181 #define CONFIG_NR_DRAM_BANKS            1
 182 #define PHYS_SDRAM                      (0x80000000)
 183 #define PHYS_SDRAM_SIZE                 (256 * 1024 * 1024)
 184
 185 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 186 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 187 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 188
 189 #define CONFIG_SYS_INIT_SP_OFFSET \
 190         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 191 #define CONFIG_SYS_INIT_SP_ADDR \
 192         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 193
 194 /* Environment organization */
 195 #define CONFIG_SYS_NO_FLASH
 196
 197 #ifdef CONFIG_ENV_IS_IN_MMC
 198 #define CONFIG_SYS_MMC_ENV_DEV          0
 199 #define CONFIG_ENV_OFFSET               (12 * 64 * 1024)
 200 #define CONFIG_ENV_SIZE                 (8 * 1024)
 201 #endif
 202
 203 #ifdef CONFIG_ENV_IS_IN_NAND
 204 #define CONFIG_ENV_SIZE                 (64 * 2048)
 205 #define CONFIG_ENV_RANGE                (4 * 64 * 2048)
 206 #define CONFIG_ENV_OFFSET               (12 * 64 * 2048)
 207 #endif
 208
 209 #define CONFIG_SYS_NO_FLASH
 210
 211 #define CONFIG_SYS_CACHELINE_SIZE 32
 212
 213 /* USB Host Support */
 214 #define CONFIG_USB_EHCI
 215 #define CONFIG_USB_EHCI_VF
 216 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 217 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 218
 219 /* USB Client Support */
 220 #define CONFIG_TRDX_VID                  0x1B67
 221 #define CONFIG_TRDX_PID_COLIBRI_VF50     0x0016
 222 #define CONFIG_TRDX_PID_COLIBRI_VF61     0x0017
 223 #define CONFIG_TRDX_PID_COLIBRI_VF61IT   0x0018
 224 #define CONFIG_TRDX_PID_COLIBRI_VF50IT   0x0019
 225
 226 /* USB DFU */
 227 #define CONFIG_USB_FUNCTION_DFU
 228 #define CONFIG_DFU_NAND
 229 #define CONFIG_DFU_MMC
 230 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
 231
 232 /* USB Storage */
 233 #define CONFIG_USB_STORAGE
 234 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 235
 236 #endif /* __CONFIG_H */