include/configs/colibri_vf.h

   1 /*
   2  * Copyright 2015 Toradex, Inc.
   3  *
   4  * Configuration settings for the Toradex VF50/VF61 module.
   5  *
   6  * Based on vf610twr.h:
   7  * Copyright 2013 Freescale Semiconductor, Inc.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #define CONFIG_SYS_CACHELINE_SIZE       32
  16
  17 #include <asm/arch/imx-regs.h>
  18
  19 #define CONFIG_VF610
  20 #define CONFIG_SYS_THUMB_BUILD
  21 #define CONFIG_USE_ARCH_MEMCPY
  22 #define CONFIG_USE_ARCH_MEMSET
  23 #define CONFIG_SYS_FSL_CLK
  24
  25 #define CONFIG_ARCH_MISC_INIT
  26 #define CONFIG_DISPLAY_CPUINFO
  27 #define CONFIG_DISPLAY_BOARDINFO
  28
  29 #define CONFIG_SKIP_LOWLEVEL_INIT
  30
  31 #define CONFIG_CMD_FUSE
  32 #ifdef CONFIG_CMD_FUSE
  33 #define CONFIG_MXC_OCOTP
  34 #endif
  35
  36 /* Size of malloc() pool */
  37 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  38
  39 #define CONFIG_BOARD_EARLY_INIT_F
  40
  41 /* Allow to overwrite serial and ethaddr */
  42 #define CONFIG_ENV_OVERWRITE
  43 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  44 #define CONFIG_VERSION_VARIABLE
  45 #define CONFIG_BAUDRATE                 115200
  46 #define CONFIG_CMD_ASKENV
  47
  48 /* NAND support */
  49 #define CONFIG_CMD_NAND
  50 #define CONFIG_SYS_NAND_ONFI_DETECTION
  51 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  52 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR
  53
  54 /* Dynamic MTD partition support */
  55 #define CONFIG_CMD_MTDPARTS     /* Enable 'mtdparts' command line support */
  56 #define CONFIG_MTD_PARTITIONS
  57 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
  58 #define MTDIDS_DEFAULT          "nand0=vf610_nfc"
  59 #define MTDPARTS_DEFAULT        "mtdparts=vf610_nfc:"           \
  60                                 "128k(vf-bcb)ro,"               \
  61                                 "1408k(u-boot)ro,"              \
  62                                 "512k(u-boot-env),"             \
  63                                 "-(ubi)"
  64
  65 #define CONFIG_MMC
  66 #define CONFIG_FSL_ESDHC
  67 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  68 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  69
  70 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
  71
  72 #define CONFIG_CMD_MMC
  73 #define CONFIG_GENERIC_MMC
  74 #define CONFIG_CMD_FAT
  75 #define CONFIG_CMD_EXT4
  76 #define CONFIG_DOS_PARTITION
  77
  78 #define CONFIG_RBTREE
  79 #define CONFIG_LZO
  80 #define CONFIG_CMD_FS_GENERIC
  81 #define CONFIG_CMD_BOOTZ
  82 #define CONFIG_CMD_UBI
  83 #define CONFIG_MTD_UBI_FASTMAP
  84 #define CONFIG_CMD_UBIFS        /* increases size by almost 60 KB */
  85
  86 #define CONFIG_CMD_PING
  87 #define CONFIG_CMD_DHCP
  88 #define CONFIG_CMD_MII
  89 #define CONFIG_FEC_MXC
  90 #define CONFIG_MII
  91 #define IMX_FEC_BASE                    ENET1_BASE_ADDR
  92 #define CONFIG_FEC_XCV_TYPE             RMII
  93 #define CONFIG_FEC_MXC_PHYADDR          0
  94 #define CONFIG_PHYLIB
  95 #define CONFIG_PHY_MICREL
  96
  97 #define CONFIG_IPADDR           192.168.10.2
  98 #define CONFIG_NETMASK          255.255.255.0
  99 #define CONFIG_SERVERIP         192.168.10.1
 100
 101 #define CONFIG_BOOTDELAY                1
 102 #define CONFIG_BOARD_LATE_INIT
 103
 104 #define CONFIG_LOADADDR                 0x80008000
 105 #define CONFIG_FDTADDR                  0x84000000
 106
 107 /* We boot from the gfxRAM area of the OCRAM. */
 108 #define CONFIG_SYS_TEXT_BASE            0x3f408000
 109 #define CONFIG_BOARD_SIZE_LIMIT         524288
 110
 111 #define SD_BOOTCMD \
 112         "sdargs=root=/dev/mmcblk0p2 rw rootwait\0"      \
 113         "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
 114         "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
 115         "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
 116         "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
 117         "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 118
 119 #define NFS_BOOTCMD \
 120         "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
 121         "nfsboot=run setup; " \
 122         "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
 123         "${setupargs} ${vidargs}; echo Booting from NFS...;" \
 124         "dhcp ${kernel_addr_r} && "     \
 125         "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
 126         "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 127
 128 #define UBI_BOOTCMD     \
 129         "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
 130         "ubi.fm_autoconvert=1\0" \
 131         "ubiboot=run setup; " \
 132         "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
 133         "${setupargs} ${vidargs}; echo Booting from NAND...; " \
 134         "ubi part ubi && ubifsmount ubi0:rootfs && " \
 135         "ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
 136         "ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
 137         "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 138
 139 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
 140
 141 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
 142
 143 #define CONFIG_EXTRA_ENV_SETTINGS \
 144         "kernel_addr_r=0x82000000\0" \
 145         "fdt_addr_r=0x84000000\0" \
 146         "kernel_file=zImage\0" \
 147         "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
 148         "fdt_board=eval-v3\0" \
 149         "defargs=\0" \
 150         "console=ttyLP0\0" \
 151         "setup=setenv setupargs " \
 152         "console=tty1 console=${console}" \
 153         ",${baudrate}n8 ${memargs}\0" \
 154         "setsdupdate=mmc rescan && set interface mmc && " \
 155         "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 156         "source ${loadaddr}\0" \
 157         "setusbupdate=usb start && set interface usb && " \
 158         "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 159         "source ${loadaddr}\0" \
 160         "setupdate=run setsdupdate || run setusbupdate\0" \
 161         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 162         "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 163         SD_BOOTCMD \
 164         NFS_BOOTCMD \
 165         UBI_BOOTCMD
 166
 167 /* Miscellaneous configurable options */
 168 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 169 #undef CONFIG_AUTO_COMPLETE
 170 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 171 #define CONFIG_SYS_PBSIZE               \
 172                         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 173 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 174 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 175
 176 #define CONFIG_CMD_MEMTEST
 177 #define CONFIG_SYS_MEMTEST_START        0x80010000
 178 #define CONFIG_SYS_MEMTEST_END          0x87C00000
 179
 180 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 181 #define CONFIG_SYS_HZ                   1000
 182 #define CONFIG_CMDLINE_EDITING
 183
 184 /*
 185  * Stack sizes
 186  * The stack sizes are set up in start.S using the settings below
 187  */
 188 #define CONFIG_STACKSIZE                (128 * 1024)    /* regular stack */
 189
 190 /* Physical memory map */
 191 #define CONFIG_NR_DRAM_BANKS            1
 192 #define PHYS_SDRAM                      (0x80000000)
 193 #define PHYS_SDRAM_SIZE                 (256 * 1024 * 1024)
 194
 195 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 196 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 197 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 198
 199 #define CONFIG_SYS_INIT_SP_OFFSET \
 200         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 201 #define CONFIG_SYS_INIT_SP_ADDR \
 202         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 203
 204 /* Environment organization */
 205 #define CONFIG_SYS_NO_FLASH
 206
 207 #ifdef CONFIG_ENV_IS_IN_MMC
 208 #define CONFIG_SYS_MMC_ENV_DEV          0
 209 #define CONFIG_ENV_OFFSET               (12 * 64 * 1024)
 210 #define CONFIG_ENV_SIZE                 (8 * 1024)
 211 #endif
 212
 213 #ifdef CONFIG_ENV_IS_IN_NAND
 214 #define CONFIG_ENV_SIZE                 (64 * 2048)
 215 #define CONFIG_ENV_RANGE                (4 * 64 * 2048)
 216 #define CONFIG_ENV_OFFSET               (12 * 64 * 2048)
 217 #endif
 218
 219 #define CONFIG_CMD_BOOTZ
 220
 221 #define CONFIG_SYS_NO_FLASH
 222
 223 #define CONFIG_SYS_CACHELINE_SIZE 32
 224
 225 /* USB Host Support */
 226 #define CONFIG_CMD_USB
 227 #define CONFIG_USB_EHCI
 228 #define CONFIG_USB_EHCI_VF
 229 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 230 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 231
 232 /* USB Client Support */
 233 #define CONFIG_TRDX_VID                  0x1B67
 234 #define CONFIG_TRDX_PID_COLIBRI_VF50     0x0016
 235 #define CONFIG_TRDX_PID_COLIBRI_VF61     0x0017
 236 #define CONFIG_TRDX_PID_COLIBRI_VF61IT   0x0018
 237 #define CONFIG_TRDX_PID_COLIBRI_VF50IT   0x0019
 238
 239 /* USB DFU */
 240 #define CONFIG_CMD_DFU
 241 #define CONFIG_USB_FUNCTION_DFU
 242 #define CONFIG_DFU_NAND
 243 #define CONFIG_DFU_MMC
 244 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
 245
 246 /* USB Storage */
 247 #define CONFIG_USB_STORAGE
 248 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 249 #define CONFIG_CMD_USB_MASS_STORAGE
 250
 251 #endif /* __CONFIG_H */