include/configs/colibri_vf.h

   1 /*
   2  * Copyright 2015 Toradex, Inc.
   3  *
   4  * Configuration settings for the Toradex VF50/VF61 module.
   5  *
   6  * Based on vf610twr.h:
   7  * Copyright 2013 Freescale Semiconductor, Inc.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #include <asm/arch/imx-regs.h>
  16
  17 #define CONFIG_VF610
  18 #define CONFIG_SYS_THUMB_BUILD
  19 #define CONFIG_USE_ARCH_MEMCPY
  20 #define CONFIG_USE_ARCH_MEMSET
  21
  22 #define CONFIG_SYS_GENERIC_BOARD
  23 #define CONFIG_ARCH_MISC_INIT
  24 #define CONFIG_DISPLAY_CPUINFO
  25 #define CONFIG_DISPLAY_BOARDINFO
  26
  27 #define CONFIG_SKIP_LOWLEVEL_INIT
  28
  29 #define CONFIG_CMD_FUSE
  30 #ifdef CONFIG_CMD_FUSE
  31 #define CONFIG_MXC_OCOTP
  32 #endif
  33
  34 /* Size of malloc() pool */
  35 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  36
  37 #define CONFIG_BOARD_EARLY_INIT_F
  38
  39 #define CONFIG_FSL_LPUART
  40 #define LPUART_BASE                     UART0_BASE
  41
  42 /* Allow to overwrite serial and ethaddr */
  43 #define CONFIG_ENV_OVERWRITE
  44 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  45 #define CONFIG_VERSION_VARIABLE
  46 #define CONFIG_SYS_UART_PORT            (0)
  47 #define CONFIG_BAUDRATE                 115200
  48 #define CONFIG_CMD_ASKENV
  49
  50 /* NAND support */
  51 #define CONFIG_CMD_NAND
  52 #define CONFIG_SYS_NAND_ONFI_DETECTION
  53 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  54 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR
  55
  56 /* GPIO support */
  57 #define CONFIG_DM_GPIO
  58 #define CONFIG_CMD_GPIO
  59 #define CONFIG_VYBRID_GPIO
  60
  61 /* Dynamic MTD partition support */
  62 #define CONFIG_CMD_MTDPARTS     /* Enable 'mtdparts' command line support */
  63 #define CONFIG_MTD_PARTITIONS
  64 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
  65 #define MTDIDS_DEFAULT          "nand0=vf610_nfc"
  66 #define MTDPARTS_DEFAULT        "mtdparts=vf610_nfc:"           \
  67                                 "128k(vf-bcb)ro,"               \
  68                                 "1408k(u-boot)ro,"              \
  69                                 "512k(u-boot-env),"             \
  70                                 "-(ubi)"
  71
  72
  73 #define CONFIG_MMC
  74 #define CONFIG_FSL_ESDHC
  75 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  76 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  77
  78 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
  79
  80 #define CONFIG_CMD_MMC
  81 #define CONFIG_GENERIC_MMC
  82 #define CONFIG_CMD_FAT
  83 #define CONFIG_CMD_EXT3
  84 #define CONFIG_CMD_EXT4
  85 #define CONFIG_DOS_PARTITION
  86
  87 #define CONFIG_RBTREE
  88 #define CONFIG_LZO
  89 #define CONFIG_CMD_FS_GENERIC
  90 #define CONFIG_CMD_BOOTZ
  91 #define CONFIG_CMD_UBI
  92 #define CONFIG_MTD_UBI_FASTMAP
  93 #define CONFIG_CMD_UBIFS        /* increases size by almost 60 KB */
  94
  95 #define CONFIG_CMD_PING
  96 #define CONFIG_CMD_DHCP
  97 #define CONFIG_CMD_MII
  98 #define CONFIG_FEC_MXC
  99 #define CONFIG_MII
 100 #define IMX_FEC_BASE                    ENET1_BASE_ADDR
 101 #define CONFIG_FEC_XCV_TYPE             RMII
 102 #define CONFIG_FEC_MXC_PHYADDR          0
 103 #define CONFIG_PHYLIB
 104 #define CONFIG_PHY_MICREL
 105
 106 #define CONFIG_IPADDR           192.168.10.2
 107 #define CONFIG_NETMASK          255.255.255.0
 108 #define CONFIG_SERVERIP         192.168.10.1
 109
 110 #define CONFIG_BOOTDELAY                1
 111 #define CONFIG_BOARD_LATE_INIT
 112
 113 #define CONFIG_LOADADDR                 0x80008000
 114 #define CONFIG_FDTADDR                  0x84000000
 115
 116 /* We boot from the gfxRAM area of the OCRAM. */
 117 #define CONFIG_SYS_TEXT_BASE            0x3f408000
 118 #define CONFIG_BOARD_SIZE_LIMIT         524288
 119
 120 #define SD_BOOTCMD \
 121         "sdargs=root=/dev/mmcblk0p2 rw rootwait\0"      \
 122         "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
 123         "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
 124         "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
 125         "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
 126         "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 127
 128 #define NFS_BOOTCMD \
 129         "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
 130         "nfsboot=run setup; " \
 131         "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
 132         "${setupargs} ${vidargs}; echo Booting from NFS...;" \
 133         "dhcp ${kernel_addr_r} && "     \
 134         "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
 135         "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 136
 137 #define UBI_BOOTCMD     \
 138         "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
 139         "ubi.fm_autoconvert=1\0" \
 140         "ubiboot=run setup; " \
 141         "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
 142         "${setupargs} ${vidargs}; echo Booting from NAND...; " \
 143         "ubi part ubi && ubifsmount ubi0:rootfs && " \
 144         "ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
 145         "ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
 146         "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 147
 148 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
 149
 150 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
 151
 152 #define CONFIG_EXTRA_ENV_SETTINGS \
 153         "kernel_addr_r=0x82000000\0" \
 154         "fdt_addr_r=0x84000000\0" \
 155         "kernel_file=zImage\0" \
 156         "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
 157         "fdt_board=eval-v3\0" \
 158         "defargs=\0" \
 159         "console=ttyLP0\0" \
 160         "setup=setenv setupargs " \
 161         "console=tty1 console=${console}" \
 162         ",${baudrate}n8 ${memargs}\0" \
 163         "setsdupdate=mmc rescan && set interface mmc && " \
 164         "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 165         "source ${loadaddr}\0" \
 166         "setusbupdate=usb start && set interface usb && " \
 167         "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 168         "source ${loadaddr}\0" \
 169         "setupdate=run setsdupdate || run setusbupdate\0" \
 170         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 171         "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 172         SD_BOOTCMD \
 173         NFS_BOOTCMD \
 174         UBI_BOOTCMD
 175
 176 /* Miscellaneous configurable options */
 177 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 178 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
 179 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 180 #define CONFIG_SYS_PROMPT               "Colibri VFxx # "
 181 #undef CONFIG_AUTO_COMPLETE
 182 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 183 #define CONFIG_SYS_PBSIZE               \
 184                         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 185 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 186 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 187
 188 #define CONFIG_CMD_MEMTEST
 189 #define CONFIG_SYS_MEMTEST_START        0x80010000
 190 #define CONFIG_SYS_MEMTEST_END          0x87C00000
 191
 192 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 193 #define CONFIG_SYS_HZ                   1000
 194 #define CONFIG_CMDLINE_EDITING
 195
 196 /*
 197  * Stack sizes
 198  * The stack sizes are set up in start.S using the settings below
 199  */
 200 #define CONFIG_STACKSIZE                (128 * 1024)    /* regular stack */
 201
 202 /* Physical memory map */
 203 #define CONFIG_NR_DRAM_BANKS            1
 204 #define PHYS_SDRAM                      (0x80000000)
 205 #define PHYS_SDRAM_SIZE                 (256 * 1024 * 1024)
 206
 207 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 208 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 209 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 210
 211 #define CONFIG_SYS_INIT_SP_OFFSET \
 212         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 213 #define CONFIG_SYS_INIT_SP_ADDR \
 214         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 215
 216 /* Environment organization */
 217 #define CONFIG_SYS_NO_FLASH
 218
 219 #ifdef CONFIG_ENV_IS_IN_MMC
 220 #define CONFIG_SYS_MMC_ENV_DEV          0
 221 #define CONFIG_ENV_OFFSET               (12 * 64 * 1024)
 222 #define CONFIG_ENV_SIZE                 (8 * 1024)
 223 #endif
 224
 225 #ifdef CONFIG_ENV_IS_IN_NAND
 226 #define CONFIG_ENV_SIZE                 (64 * 2048)
 227 #define CONFIG_ENV_RANGE                (4 * 64 * 2048)
 228 #define CONFIG_ENV_OFFSET               (12 * 64 * 2048)
 229 #endif
 230
 231 #define CONFIG_OF_LIBFDT
 232 #define CONFIG_CMD_BOOTZ
 233
 234 #define CONFIG_SYS_NO_FLASH
 235
 236 #define CONFIG_SYS_CACHELINE_SIZE 32
 237
 238 /* USB Host Support */
 239 #define CONFIG_CMD_USB
 240 #define CONFIG_USB_EHCI
 241 #define CONFIG_USB_EHCI_VF
 242 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 243 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 244
 245 /* USB Client Support */
 246 #define CONFIG_USB_GADGET
 247 #define CONFIG_CI_UDC
 248 #define CONFIG_USB_GADGET_DUALSPEED
 249 #define CONFIG_USB_GADGET_VBUS_DRAW      2
 250 #define CONFIG_TRDX_VID                  0x1B67
 251 #define CONFIG_TRDX_PID_COLIBRI_VF50     0x0016
 252 #define CONFIG_TRDX_PID_COLIBRI_VF61     0x0017
 253 #define CONFIG_TRDX_PID_COLIBRI_VF61IT   0x0018
 254 #define CONFIG_TRDX_PID_COLIBRI_VF50IT   0x0019
 255 #define CONFIG_G_DNL_MANUFACTURER        "Toradex"
 256 #define CONFIG_G_DNL_VENDOR_NUM          CONFIG_TRDX_VID
 257 #define CONFIG_G_DNL_PRODUCT_NUM         CONFIG_TRDX_PID_COLIBRI_VF50
 258
 259 /* USB DFU */
 260 #define CONFIG_USBDOWNLOAD_GADGET
 261 #define CONFIG_CMD_DFU
 262 #define CONFIG_DFU_FUNCTION
 263 #define CONFIG_DFU_NAND
 264 #define CONFIG_DFU_MMC
 265 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
 266
 267 /* USB Storage */
 268 #define CONFIG_USB_STORAGE
 269 #define CONFIG_USB_GADGET_MASS_STORAGE
 270 #define CONFIG_CMD_USB_MASS_STORAGE
 271
 272 /* Enable SPI support */
 273 #ifdef CONFIG_OF_CONTROL
 274 #define CONFIG_DM_SPI
 275 #define CONFIG_CMD_SPI
 276 #define CONFIG_FSL_DSPI
 277 #endif
 278
 279 #endif /* __CONFIG_H */