]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/colibri_vf.h
Merge git://git.denx.de/u-boot-mpc85xx
[people/ms/u-boot.git] / include / configs / colibri_vf.h
1 /*
2 * Copyright 2015-2016 Toradex, Inc.
3 *
4 * Configuration settings for the Toradex VF50/VF61 modules.
5 *
6 * Based on vf610twr.h:
7 * Copyright 2013 Freescale Semiconductor, Inc.
8 *
9 * SPDX-License-Identifier: GPL-2.0+
10 */
11
12 #ifndef __CONFIG_H
13 #define __CONFIG_H
14
15 #include <asm/arch/imx-regs.h>
16
17 #define CONFIG_VF610
18 #define CONFIG_SYS_THUMB_BUILD
19 #define CONFIG_USE_ARCH_MEMCPY
20 #define CONFIG_USE_ARCH_MEMSET
21 #define CONFIG_SYS_FSL_CLK
22
23 #define CONFIG_ARCH_MISC_INIT
24 #define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
25
26 #define CONFIG_SKIP_LOWLEVEL_INIT
27
28 #define CONFIG_CMD_FUSE
29 #ifdef CONFIG_CMD_FUSE
30 #define CONFIG_MXC_OCOTP
31 #endif
32
33 /* Size of malloc() pool */
34 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
35
36 #define CONFIG_BOARD_EARLY_INIT_F
37
38 /* Allow to overwrite serial and ethaddr */
39 #define CONFIG_ENV_OVERWRITE
40 #define CONFIG_ENV_VARS_UBOOT_CONFIG
41 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
42 #define CONFIG_BAUDRATE 115200
43
44 /* NAND support */
45 #define CONFIG_CMD_NAND
46 #define CONFIG_SYS_NAND_ONFI_DETECTION
47 #define CONFIG_SYS_MAX_NAND_DEVICE 1
48 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
49
50 /* Dynamic MTD partition support */
51 #define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
52 #define CONFIG_MTD_PARTITIONS
53 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
54 #define MTDIDS_DEFAULT "nand0=vf610_nfc"
55 #define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \
56 "128k(vf-bcb)ro," \
57 "1408k(u-boot)ro," \
58 "512k(u-boot-env)," \
59 "-(ubi)"
60
61 #define CONFIG_MMC
62 #define CONFIG_FSL_ESDHC
63 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
64 #define CONFIG_SYS_FSL_ESDHC_NUM 1
65
66 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
67
68 #define CONFIG_GENERIC_MMC
69 #define CONFIG_DOS_PARTITION
70
71 #define CONFIG_RBTREE
72 #define CONFIG_LZO
73 #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
74
75 #define CONFIG_FEC_MXC
76 #define CONFIG_MII
77 #define IMX_FEC_BASE ENET1_BASE_ADDR
78 #define CONFIG_FEC_XCV_TYPE RMII
79 #define CONFIG_FEC_MXC_PHYADDR 0
80 #define CONFIG_PHYLIB
81 #define CONFIG_PHY_MICREL
82
83 #define CONFIG_IPADDR 192.168.10.2
84 #define CONFIG_NETMASK 255.255.255.0
85 #define CONFIG_SERVERIP 192.168.10.1
86
87 #define CONFIG_BOARD_LATE_INIT
88
89 #define CONFIG_LOADADDR 0x80008000
90 #define CONFIG_FDTADDR 0x84000000
91
92 /* We boot from the gfxRAM area of the OCRAM. */
93 #define CONFIG_SYS_TEXT_BASE 0x3f408000
94 #define CONFIG_BOARD_SIZE_LIMIT 524288
95
96 #define SD_BOOTCMD \
97 "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
98 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
99 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
100 "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
101 "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
102 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
103
104 #define NFS_BOOTCMD \
105 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
106 "nfsboot=run setup; " \
107 "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
108 "${setupargs} ${vidargs}; echo Booting from NFS...;" \
109 "dhcp ${kernel_addr_r} && " \
110 "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
111 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
112
113 #define UBI_BOOTCMD \
114 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
115 "ubi.fm_autoconvert=1\0" \
116 "ubiboot=run setup; " \
117 "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \
118 "${setupargs} ${vidargs}; echo Booting from NAND...; " \
119 "ubi part ubi && " \
120 "ubi read ${kernel_addr_r} kernel && " \
121 "ubi read ${fdt_addr_r} dtb && " \
122 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
123
124 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
125
126 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
127
128 #define CONFIG_EXTRA_ENV_SETTINGS \
129 "kernel_addr_r=0x82000000\0" \
130 "fdt_addr_r=0x84000000\0" \
131 "kernel_file=zImage\0" \
132 "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
133 "fdt_board=eval-v3\0" \
134 "defargs=\0" \
135 "console=ttyLP0\0" \
136 "setup=setenv setupargs " \
137 "console=tty1 console=${console}" \
138 ",${baudrate}n8 ${memargs}\0" \
139 "setsdupdate=mmc rescan && set interface mmc && " \
140 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
141 "source ${loadaddr}\0" \
142 "setusbupdate=usb start && set interface usb && " \
143 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
144 "source ${loadaddr}\0" \
145 "setupdate=run setsdupdate || run setusbupdate\0" \
146 "mtdparts=" MTDPARTS_DEFAULT "\0" \
147 "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
148 SD_BOOTCMD \
149 NFS_BOOTCMD \
150 UBI_BOOTCMD
151
152 /* Miscellaneous configurable options */
153 #define CONFIG_SYS_LONGHELP /* undef to save memory */
154 #undef CONFIG_AUTO_COMPLETE
155 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
156 #define CONFIG_SYS_PBSIZE \
157 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
158 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
159 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
160
161 #define CONFIG_SYS_MEMTEST_START 0x80010000
162 #define CONFIG_SYS_MEMTEST_END 0x87C00000
163
164 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
165 #define CONFIG_SYS_HZ 1000
166 #define CONFIG_CMDLINE_EDITING
167
168 /*
169 * Stack sizes
170 * The stack sizes are set up in start.S using the settings below
171 */
172 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
173
174 /* Physical memory map */
175 #define CONFIG_NR_DRAM_BANKS 1
176 #define PHYS_SDRAM (0x80000000)
177 #define PHYS_SDRAM_SIZE (256 * 1024 * 1024)
178
179 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
180 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
181 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
182
183 #define CONFIG_SYS_INIT_SP_OFFSET \
184 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
185 #define CONFIG_SYS_INIT_SP_ADDR \
186 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
187
188 /* Environment organization */
189 #define CONFIG_SYS_NO_FLASH
190
191 #ifdef CONFIG_ENV_IS_IN_MMC
192 #define CONFIG_SYS_MMC_ENV_DEV 0
193 #define CONFIG_ENV_OFFSET (12 * 64 * 1024)
194 #define CONFIG_ENV_SIZE (8 * 1024)
195 #endif
196
197 #ifdef CONFIG_ENV_IS_IN_NAND
198 #define CONFIG_ENV_SIZE (64 * 2048)
199 #define CONFIG_ENV_RANGE (4 * 64 * 2048)
200 #define CONFIG_ENV_OFFSET (12 * 64 * 2048)
201 #endif
202
203 #define CONFIG_SYS_NO_FLASH
204
205 /* USB Host Support */
206 #define CONFIG_USB_EHCI
207 #define CONFIG_USB_EHCI_VF
208 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
209 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
210
211 /* USB DFU */
212 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
213
214 /* USB Storage */
215 #define CONFIG_USB_FUNCTION_MASS_STORAGE
216
217 #endif /* __CONFIG_H */