include/configs/colibri_vf.h

   1 /*
   2  * Copyright 2015 Toradex, Inc.
   3  *
   4  * Configuration settings for the Toradex VF50/VF61 module.
   5  *
   6  * Based on vf610twr.h:
   7  * Copyright 2013 Freescale Semiconductor, Inc.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #include <asm/arch/imx-regs.h>
  16 #include <config_cmd_default.h>
  17
  18 #define CONFIG_VF610
  19 #define CONFIG_SYS_THUMB_BUILD
  20 #define CONFIG_USE_ARCH_MEMCPY
  21 #define CONFIG_USE_ARCH_MEMSET
  22
  23 #define CONFIG_SYS_GENERIC_BOARD
  24 #define CONFIG_ARCH_MISC_INIT
  25 #define CONFIG_DISPLAY_CPUINFO
  26 #define CONFIG_DISPLAY_BOARDINFO
  27
  28 #define CONFIG_SKIP_LOWLEVEL_INIT
  29
  30 #define CONFIG_CMD_FUSE
  31 #ifdef CONFIG_CMD_FUSE
  32 #define CONFIG_MXC_OCOTP
  33 #endif
  34
  35 /* Size of malloc() pool */
  36 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  37
  38 #define CONFIG_BOARD_EARLY_INIT_F
  39
  40 #define CONFIG_FSL_LPUART
  41 #define LPUART_BASE                     UART0_BASE
  42
  43 /* Allow to overwrite serial and ethaddr */
  44 #define CONFIG_ENV_OVERWRITE
  45 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  46 #define CONFIG_VERSION_VARIABLE
  47 #define CONFIG_SYS_UART_PORT            (0)
  48 #define CONFIG_BAUDRATE                 115200
  49 #define CONFIG_CMD_ASKENV
  50
  51 /* NAND support */
  52 #define CONFIG_CMD_NAND
  53 #define CONFIG_SYS_NAND_ONFI_DETECTION
  54 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  55 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR
  56
  57 /* GPIO support */
  58 #define CONFIG_DM_GPIO
  59 #define CONFIG_CMD_GPIO
  60 #define CONFIG_VYBRID_GPIO
  61
  62 /* Dynamic MTD partition support */
  63 #define CONFIG_CMD_MTDPARTS     /* Enable 'mtdparts' command line support */
  64 #define CONFIG_MTD_PARTITIONS
  65 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
  66 #define MTDIDS_DEFAULT          "nand0=vf610_nfc"
  67 #define MTDPARTS_DEFAULT        "mtdparts=vf610_nfc:"           \
  68                                 "128k(vf-bcb)ro,"               \
  69                                 "1408k(u-boot)ro,"              \
  70                                 "512k(u-boot-env),"             \
  71                                 "-(ubi)"
  72
  73 #undef CONFIG_CMD_IMLS
  74
  75 #define CONFIG_MMC
  76 #define CONFIG_FSL_ESDHC
  77 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  78 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  79
  80 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
  81
  82 #define CONFIG_CMD_MMC
  83 #define CONFIG_GENERIC_MMC
  84 #define CONFIG_CMD_FAT
  85 #define CONFIG_CMD_EXT3
  86 #define CONFIG_CMD_EXT4
  87 #define CONFIG_DOS_PARTITION
  88
  89 #define CONFIG_RBTREE
  90 #define CONFIG_LZO
  91 #define CONFIG_CMD_FS_GENERIC
  92 #define CONFIG_CMD_BOOTZ
  93 #define CONFIG_CMD_UBI
  94 #define CONFIG_MTD_UBI_FASTMAP
  95 #define CONFIG_CMD_UBIFS        /* increases size by almost 60 KB */
  96
  97 #define CONFIG_CMD_PING
  98 #define CONFIG_CMD_DHCP
  99 #define CONFIG_CMD_MII
 100 #define CONFIG_CMD_NET
 101 #define CONFIG_FEC_MXC
 102 #define CONFIG_MII
 103 #define IMX_FEC_BASE                    ENET1_BASE_ADDR
 104 #define CONFIG_FEC_XCV_TYPE             RMII
 105 #define CONFIG_FEC_MXC_PHYADDR          0
 106 #define CONFIG_PHYLIB
 107 #define CONFIG_PHY_MICREL
 108
 109 #define CONFIG_IPADDR           192.168.10.2
 110 #define CONFIG_NETMASK          255.255.255.0
 111 #define CONFIG_SERVERIP         192.168.10.1
 112
 113 #define CONFIG_BOOTDELAY                1
 114 #define CONFIG_BOARD_LATE_INIT
 115
 116 #define CONFIG_LOADADDR                 0x80008000
 117 #define CONFIG_FDTADDR                  0x84000000
 118
 119 /* We boot from the gfxRAM area of the OCRAM. */
 120 #define CONFIG_SYS_TEXT_BASE            0x3f408000
 121 #define CONFIG_BOARD_SIZE_LIMIT         524288
 122
 123 #define SD_BOOTCMD \
 124         "sdargs=root=/dev/mmcblk0p2 rw rootwait\0"      \
 125         "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
 126         "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
 127         "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
 128         "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
 129         "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 130
 131 #define NFS_BOOTCMD \
 132         "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
 133         "nfsboot=run setup; " \
 134         "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
 135         "${setupargs} ${vidargs}; echo Booting from NFS...;" \
 136         "dhcp ${kernel_addr_r} && "     \
 137         "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
 138         "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 139
 140 #define UBI_BOOTCMD     \
 141         "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
 142         "ubi.fm_autoconvert=1\0" \
 143         "ubiboot=run setup; " \
 144         "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
 145         "${setupargs} ${vidargs}; echo Booting from NAND...; " \
 146         "ubi part ubi && ubifsmount ubi0:rootfs && " \
 147         "ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
 148         "ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
 149         "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 150
 151 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
 152
 153 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
 154
 155 #define CONFIG_EXTRA_ENV_SETTINGS \
 156         "kernel_addr_r=0x82000000\0" \
 157         "fdt_addr_r=0x84000000\0" \
 158         "kernel_file=zImage\0" \
 159         "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
 160         "fdt_board=eval-v3\0" \
 161         "defargs=\0" \
 162         "console=ttyLP0\0" \
 163         "setup=setenv setupargs " \
 164         "console=tty1 console=${console}" \
 165         ",${baudrate}n8 ${memargs}\0" \
 166         "setsdupdate=mmc rescan && set interface mmc && " \
 167         "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 168         "source ${loadaddr}\0" \
 169         "setusbupdate=usb start && set interface usb && " \
 170         "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 171         "source ${loadaddr}\0" \
 172         "setupdate=run setsdupdate || run setusbupdate\0" \
 173         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 174         "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 175         SD_BOOTCMD \
 176         NFS_BOOTCMD \
 177         UBI_BOOTCMD
 178
 179 /* Miscellaneous configurable options */
 180 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 181 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
 182 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 183 #define CONFIG_SYS_PROMPT               "Colibri VFxx # "
 184 #undef CONFIG_AUTO_COMPLETE
 185 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 186 #define CONFIG_SYS_PBSIZE               \
 187                         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 188 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 189 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 190
 191 #define CONFIG_CMD_MEMTEST
 192 #define CONFIG_SYS_MEMTEST_START        0x80010000
 193 #define CONFIG_SYS_MEMTEST_END          0x87C00000
 194
 195 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 196 #define CONFIG_SYS_HZ                   1000
 197 #define CONFIG_CMDLINE_EDITING
 198
 199 /*
 200  * Stack sizes
 201  * The stack sizes are set up in start.S using the settings below
 202  */
 203 #define CONFIG_STACKSIZE                (128 * 1024)    /* regular stack */
 204
 205 /* Physical memory map */
 206 #define CONFIG_NR_DRAM_BANKS            1
 207 #define PHYS_SDRAM                      (0x80000000)
 208 #define PHYS_SDRAM_SIZE                 (256 * 1024 * 1024)
 209
 210 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 211 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 212 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 213
 214 #define CONFIG_SYS_INIT_SP_OFFSET \
 215         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 216 #define CONFIG_SYS_INIT_SP_ADDR \
 217         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 218
 219 /* Environment organization */
 220 #define CONFIG_SYS_NO_FLASH
 221
 222 #ifdef CONFIG_ENV_IS_IN_MMC
 223 #define CONFIG_SYS_MMC_ENV_DEV          0
 224 #define CONFIG_ENV_OFFSET               (12 * 64 * 1024)
 225 #define CONFIG_ENV_SIZE                 (8 * 1024)
 226 #endif
 227
 228 #ifdef CONFIG_ENV_IS_IN_NAND
 229 #define CONFIG_ENV_SIZE                 (64 * 2048)
 230 #define CONFIG_ENV_RANGE                (4 * 64 * 2048)
 231 #define CONFIG_ENV_OFFSET               (12 * 64 * 2048)
 232 #endif
 233
 234 #define CONFIG_OF_LIBFDT
 235 #define CONFIG_CMD_BOOTZ
 236
 237 #define CONFIG_SYS_NO_FLASH
 238
 239 #define CONFIG_SYS_CACHELINE_SIZE 32
 240
 241 /* USB Host Support */
 242 #define CONFIG_CMD_USB
 243 #define CONFIG_USB_EHCI
 244 #define CONFIG_USB_EHCI_VF
 245 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 246 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 247
 248 /* USB Client Support */
 249 #define CONFIG_USB_GADGET
 250 #define CONFIG_CI_UDC
 251 #define CONFIG_USB_GADGET_DUALSPEED
 252 #define CONFIG_USB_GADGET_VBUS_DRAW      2
 253 #define CONFIG_TRDX_VID                  0x1B67
 254 #define CONFIG_TRDX_PID_COLIBRI_VF50     0x0016
 255 #define CONFIG_TRDX_PID_COLIBRI_VF61     0x0017
 256 #define CONFIG_TRDX_PID_COLIBRI_VF61IT   0x0018
 257 #define CONFIG_TRDX_PID_COLIBRI_VF50IT   0x0019
 258 #define CONFIG_G_DNL_MANUFACTURER        "Toradex"
 259 #define CONFIG_G_DNL_VENDOR_NUM          CONFIG_TRDX_VID
 260 #define CONFIG_G_DNL_PRODUCT_NUM         CONFIG_TRDX_PID_COLIBRI_VF50
 261
 262 /* USB DFU */
 263 #define CONFIG_USBDOWNLOAD_GADGET
 264 #define CONFIG_CMD_DFU
 265 #define CONFIG_DFU_FUNCTION
 266 #define CONFIG_DFU_NAND
 267 #define CONFIG_DFU_MMC
 268 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
 269
 270 /* USB Storage */
 271 #define CONFIG_USB_STORAGE
 272 #define CONFIG_USB_GADGET_MASS_STORAGE
 273 #define CONFIG_CMD_USB_MASS_STORAGE
 274
 275 #endif /* __CONFIG_H */