include/configs/colibri_vf.h

   1 /*
   2  * Copyright 2015-2016 Toradex, Inc.
   3  *
   4  * Configuration settings for the Toradex VF50/VF61 modules.
   5  *
   6  * Based on vf610twr.h:
   7  * Copyright 2013 Freescale Semiconductor, Inc.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #include <asm/arch/imx-regs.h>
  16
  17 #define CONFIG_VF610
  18 #define CONFIG_SYS_THUMB_BUILD
  19 #define CONFIG_SYS_FSL_CLK
  20
  21 #define CONFIG_ARCH_MISC_INIT
  22 #define CONFIG_DISPLAY_BOARDINFO_LATE   /* Calls show_board_info() */
  23
  24 #define CONFIG_SKIP_LOWLEVEL_INIT
  25
  26 #define CONFIG_CMD_FUSE
  27 #ifdef CONFIG_CMD_FUSE
  28 #define CONFIG_MXC_OCOTP
  29 #endif
  30
  31 /* Size of malloc() pool */
  32 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  33
  34 #define CONFIG_BOARD_EARLY_INIT_F
  35
  36 /* Allow to overwrite serial and ethaddr */
  37 #define CONFIG_ENV_OVERWRITE
  38 #define CONFIG_ENV_VARS_UBOOT_CONFIG
  39 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  40 #define CONFIG_BAUDRATE                 115200
  41
  42 /* NAND support */
  43 #define CONFIG_CMD_NAND
  44 #define CONFIG_SYS_NAND_ONFI_DETECTION
  45 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  46 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR
  47
  48 /* Dynamic MTD partition support */
  49 #define CONFIG_CMD_MTDPARTS     /* Enable 'mtdparts' command line support */
  50 #define CONFIG_MTD_PARTITIONS
  51 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
  52 #define MTDIDS_DEFAULT          "nand0=vf610_nfc"
  53 #define MTDPARTS_DEFAULT        "mtdparts=vf610_nfc:"           \
  54                                 "128k(vf-bcb)ro,"               \
  55                                 "1408k(u-boot)ro,"              \
  56                                 "512k(u-boot-env),"             \
  57                                 "-(ubi)"
  58
  59 #define CONFIG_FSL_ESDHC
  60 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  61 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  62
  63 #define CONFIG_GENERIC_MMC
  64 #define CONFIG_DOS_PARTITION
  65
  66 #define CONFIG_RBTREE
  67 #define CONFIG_LZO
  68 #define CONFIG_CMD_UBIFS        /* increases size by almost 60 KB */
  69
  70 #define CONFIG_FEC_MXC
  71 #define CONFIG_MII
  72 #define IMX_FEC_BASE                    ENET1_BASE_ADDR
  73 #define CONFIG_FEC_XCV_TYPE             RMII
  74 #define CONFIG_FEC_MXC_PHYADDR          0
  75 #define CONFIG_PHYLIB
  76 #define CONFIG_PHY_MICREL
  77
  78 #define CONFIG_IPADDR           192.168.10.2
  79 #define CONFIG_NETMASK          255.255.255.0
  80 #define CONFIG_SERVERIP         192.168.10.1
  81
  82 #define CONFIG_LOADADDR                 0x80008000
  83 #define CONFIG_FDTADDR                  0x84000000
  84
  85 /* We boot from the gfxRAM area of the OCRAM. */
  86 #define CONFIG_SYS_TEXT_BASE            0x3f408000
  87 #define CONFIG_BOARD_SIZE_LIMIT         524288
  88
  89 #define SD_BOOTCMD \
  90         "sdargs=root=/dev/mmcblk0p2 rw rootwait\0"      \
  91         "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
  92         "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
  93         "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
  94         "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
  95         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  96
  97 #define NFS_BOOTCMD \
  98         "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
  99         "nfsboot=run setup; " \
 100         "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
 101         "${setupargs} ${vidargs}; echo Booting from NFS...;" \
 102         "dhcp ${kernel_addr_r} && "     \
 103         "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
 104         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 105
 106 #define UBI_BOOTCMD     \
 107         "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
 108         "ubi.fm_autoconvert=1\0" \
 109         "ubiboot=run setup; " \
 110         "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
 111         "${setupargs} ${vidargs}; echo Booting from NAND...; " \
 112         "ubi part ubi && " \
 113         "ubi read ${kernel_addr_r} kernel && " \
 114         "ubi read ${fdt_addr_r} dtb && " \
 115         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 116
 117 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
 118
 119 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
 120
 121 #define CONFIG_EXTRA_ENV_SETTINGS \
 122         "kernel_addr_r=0x82000000\0" \
 123         "fdt_addr_r=0x84000000\0" \
 124         "kernel_file=zImage\0" \
 125         "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
 126         "fdt_board=eval-v3\0" \
 127         "fdt_fixup=;\0" \
 128         "defargs=\0" \
 129         "console=ttyLP0\0" \
 130         "setup=setenv setupargs " \
 131         "console=tty1 console=${console}" \
 132         ",${baudrate}n8 ${memargs}\0" \
 133         "setsdupdate=mmc rescan && set interface mmc && " \
 134         "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 135         "source ${loadaddr}\0" \
 136         "setusbupdate=usb start && set interface usb && " \
 137         "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 138         "source ${loadaddr}\0" \
 139         "setupdate=run setsdupdate || run setusbupdate\0" \
 140         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 141         "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 142         SD_BOOTCMD \
 143         NFS_BOOTCMD \
 144         UBI_BOOTCMD
 145
 146 /* Miscellaneous configurable options */
 147 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 148 #undef CONFIG_AUTO_COMPLETE
 149 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 150 #define CONFIG_SYS_PBSIZE               \
 151                         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 152 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 153 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 154
 155 #define CONFIG_SYS_MEMTEST_START        0x80010000
 156 #define CONFIG_SYS_MEMTEST_END          0x87C00000
 157
 158 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 159 #define CONFIG_SYS_HZ                   1000
 160 #define CONFIG_CMDLINE_EDITING
 161
 162 /*
 163  * Stack sizes
 164  * The stack sizes are set up in start.S using the settings below
 165  */
 166 #define CONFIG_STACKSIZE                (128 * 1024)    /* regular stack */
 167
 168 /* Physical memory map */
 169 #define CONFIG_NR_DRAM_BANKS            1
 170 #define PHYS_SDRAM                      (0x80000000)
 171 #define PHYS_SDRAM_SIZE                 (256 * 1024 * 1024)
 172
 173 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 174 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 175 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 176
 177 #define CONFIG_SYS_INIT_SP_OFFSET \
 178         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 179 #define CONFIG_SYS_INIT_SP_ADDR \
 180         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 181
 182 /* Environment organization */
 183 #define CONFIG_SYS_NO_FLASH
 184
 185 #ifdef CONFIG_ENV_IS_IN_MMC
 186 #define CONFIG_SYS_MMC_ENV_DEV          0
 187 #define CONFIG_ENV_OFFSET               (12 * 64 * 1024)
 188 #define CONFIG_ENV_SIZE                 (8 * 1024)
 189 #endif
 190
 191 #ifdef CONFIG_ENV_IS_IN_NAND
 192 #define CONFIG_ENV_SIZE                 (64 * 2048)
 193 #define CONFIG_ENV_RANGE                (4 * 64 * 2048)
 194 #define CONFIG_ENV_OFFSET               (12 * 64 * 2048)
 195 #endif
 196
 197 #define CONFIG_SYS_NO_FLASH
 198
 199 /* USB Host Support */
 200 #define CONFIG_USB_EHCI
 201 #define CONFIG_USB_EHCI_VF
 202 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 203 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 204
 205 /* USB DFU */
 206 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
 207
 208 /* USB Storage */
 209 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 210
 211 #endif /* __CONFIG_H */