include/configs/colibri_vf.h

   1 /*
   2  * Copyright 2015-2016 Toradex, Inc.
   3  *
   4  * Configuration settings for the Toradex VF50/VF61 modules.
   5  *
   6  * Based on vf610twr.h:
   7  * Copyright 2013 Freescale Semiconductor, Inc.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #include <asm/arch/imx-regs.h>
  16
  17 #define CONFIG_VF610
  18 #define CONFIG_SYS_THUMB_BUILD
  19 #define CONFIG_SYS_FSL_CLK
  20
  21 #define CONFIG_ARCH_MISC_INIT
  22 #define CONFIG_DISPLAY_BOARDINFO_LATE   /* Calls show_board_info() */
  23
  24 #define CONFIG_SKIP_LOWLEVEL_INIT
  25
  26 #define CONFIG_CMD_FUSE
  27 #ifdef CONFIG_CMD_FUSE
  28 #define CONFIG_MXC_OCOTP
  29 #endif
  30
  31 /* Size of malloc() pool */
  32 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  33
  34 #define CONFIG_BOARD_EARLY_INIT_F
  35
  36 /* Allow to overwrite serial and ethaddr */
  37 #define CONFIG_ENV_OVERWRITE
  38 #define CONFIG_ENV_VARS_UBOOT_CONFIG
  39 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  40 #define CONFIG_BAUDRATE                 115200
  41
  42 /* NAND support */
  43 #define CONFIG_CMD_NAND
  44 #define CONFIG_SYS_NAND_ONFI_DETECTION
  45 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  46 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR
  47
  48 /* Dynamic MTD partition support */
  49 #define CONFIG_CMD_MTDPARTS     /* Enable 'mtdparts' command line support */
  50 #define CONFIG_MTD_PARTITIONS
  51 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
  52 #define MTDIDS_DEFAULT          "nand0=vf610_nfc"
  53 #define MTDPARTS_DEFAULT        "mtdparts=vf610_nfc:"           \
  54                                 "128k(vf-bcb)ro,"               \
  55                                 "1408k(u-boot)ro,"              \
  56                                 "512k(u-boot-env),"             \
  57                                 "-(ubi)"
  58
  59 #define CONFIG_MMC
  60 #define CONFIG_FSL_ESDHC
  61 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  62 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  63
  64 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
  65
  66 #define CONFIG_GENERIC_MMC
  67 #define CONFIG_DOS_PARTITION
  68
  69 #define CONFIG_RBTREE
  70 #define CONFIG_LZO
  71 #define CONFIG_CMD_UBIFS        /* increases size by almost 60 KB */
  72
  73 #define CONFIG_FEC_MXC
  74 #define CONFIG_MII
  75 #define IMX_FEC_BASE                    ENET1_BASE_ADDR
  76 #define CONFIG_FEC_XCV_TYPE             RMII
  77 #define CONFIG_FEC_MXC_PHYADDR          0
  78 #define CONFIG_PHYLIB
  79 #define CONFIG_PHY_MICREL
  80
  81 #define CONFIG_IPADDR           192.168.10.2
  82 #define CONFIG_NETMASK          255.255.255.0
  83 #define CONFIG_SERVERIP         192.168.10.1
  84
  85 #define CONFIG_BOARD_LATE_INIT
  86
  87 #define CONFIG_LOADADDR                 0x80008000
  88 #define CONFIG_FDTADDR                  0x84000000
  89
  90 /* We boot from the gfxRAM area of the OCRAM. */
  91 #define CONFIG_SYS_TEXT_BASE            0x3f408000
  92 #define CONFIG_BOARD_SIZE_LIMIT         524288
  93
  94 #define SD_BOOTCMD \
  95         "sdargs=root=/dev/mmcblk0p2 rw rootwait\0"      \
  96         "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
  97         "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
  98         "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
  99         "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
 100         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 101
 102 #define NFS_BOOTCMD \
 103         "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
 104         "nfsboot=run setup; " \
 105         "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
 106         "${setupargs} ${vidargs}; echo Booting from NFS...;" \
 107         "dhcp ${kernel_addr_r} && "     \
 108         "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
 109         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 110
 111 #define UBI_BOOTCMD     \
 112         "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
 113         "ubi.fm_autoconvert=1\0" \
 114         "ubiboot=run setup; " \
 115         "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
 116         "${setupargs} ${vidargs}; echo Booting from NAND...; " \
 117         "ubi part ubi && " \
 118         "ubi read ${kernel_addr_r} kernel && " \
 119         "ubi read ${fdt_addr_r} dtb && " \
 120         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 121
 122 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
 123
 124 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
 125
 126 #define CONFIG_EXTRA_ENV_SETTINGS \
 127         "kernel_addr_r=0x82000000\0" \
 128         "fdt_addr_r=0x84000000\0" \
 129         "kernel_file=zImage\0" \
 130         "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
 131         "fdt_board=eval-v3\0" \
 132         "fdt_fixup=;\0" \
 133         "defargs=\0" \
 134         "console=ttyLP0\0" \
 135         "setup=setenv setupargs " \
 136         "console=tty1 console=${console}" \
 137         ",${baudrate}n8 ${memargs}\0" \
 138         "setsdupdate=mmc rescan && set interface mmc && " \
 139         "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 140         "source ${loadaddr}\0" \
 141         "setusbupdate=usb start && set interface usb && " \
 142         "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 143         "source ${loadaddr}\0" \
 144         "setupdate=run setsdupdate || run setusbupdate\0" \
 145         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 146         "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 147         SD_BOOTCMD \
 148         NFS_BOOTCMD \
 149         UBI_BOOTCMD
 150
 151 /* Miscellaneous configurable options */
 152 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 153 #undef CONFIG_AUTO_COMPLETE
 154 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 155 #define CONFIG_SYS_PBSIZE               \
 156                         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 157 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 158 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 159
 160 #define CONFIG_SYS_MEMTEST_START        0x80010000
 161 #define CONFIG_SYS_MEMTEST_END          0x87C00000
 162
 163 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 164 #define CONFIG_SYS_HZ                   1000
 165 #define CONFIG_CMDLINE_EDITING
 166
 167 /*
 168  * Stack sizes
 169  * The stack sizes are set up in start.S using the settings below
 170  */
 171 #define CONFIG_STACKSIZE                (128 * 1024)    /* regular stack */
 172
 173 /* Physical memory map */
 174 #define CONFIG_NR_DRAM_BANKS            1
 175 #define PHYS_SDRAM                      (0x80000000)
 176 #define PHYS_SDRAM_SIZE                 (256 * 1024 * 1024)
 177
 178 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 179 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 180 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 181
 182 #define CONFIG_SYS_INIT_SP_OFFSET \
 183         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 184 #define CONFIG_SYS_INIT_SP_ADDR \
 185         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 186
 187 /* Environment organization */
 188 #define CONFIG_SYS_NO_FLASH
 189
 190 #ifdef CONFIG_ENV_IS_IN_MMC
 191 #define CONFIG_SYS_MMC_ENV_DEV          0
 192 #define CONFIG_ENV_OFFSET               (12 * 64 * 1024)
 193 #define CONFIG_ENV_SIZE                 (8 * 1024)
 194 #endif
 195
 196 #ifdef CONFIG_ENV_IS_IN_NAND
 197 #define CONFIG_ENV_SIZE                 (64 * 2048)
 198 #define CONFIG_ENV_RANGE                (4 * 64 * 2048)
 199 #define CONFIG_ENV_OFFSET               (12 * 64 * 2048)
 200 #endif
 201
 202 #define CONFIG_SYS_NO_FLASH
 203
 204 /* USB Host Support */
 205 #define CONFIG_USB_EHCI
 206 #define CONFIG_USB_EHCI_VF
 207 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 208 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 209
 210 /* USB DFU */
 211 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
 212
 213 /* USB Storage */
 214 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 215
 216 #endif /* __CONFIG_H */