include/configs/colibri_vf.h

   1 /*
   2  * Copyright 2015 Toradex, Inc.
   3  *
   4  * Configuration settings for the Toradex VF50/VF61 module.
   5  *
   6  * Based on vf610twr.h:
   7  * Copyright 2013 Freescale Semiconductor, Inc.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #define CONFIG_SYS_CACHELINE_SIZE       32
  16
  17 #include <asm/arch/imx-regs.h>
  18
  19 #define CONFIG_VF610
  20 #define CONFIG_SYS_THUMB_BUILD
  21 #define CONFIG_USE_ARCH_MEMCPY
  22 #define CONFIG_USE_ARCH_MEMSET
  23 #define CONFIG_SYS_FSL_CLK
  24
  25 #define CONFIG_ARCH_MISC_INIT
  26 #define CONFIG_DISPLAY_CPUINFO
  27 #define CONFIG_DISPLAY_BOARDINFO
  28
  29 #define CONFIG_SKIP_LOWLEVEL_INIT
  30
  31 #define CONFIG_CMD_FUSE
  32 #ifdef CONFIG_CMD_FUSE
  33 #define CONFIG_MXC_OCOTP
  34 #endif
  35
  36 /* Size of malloc() pool */
  37 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  38
  39 #define CONFIG_BOARD_EARLY_INIT_F
  40
  41 #define LPUART_BASE                     UART0_BASE
  42
  43 /* Allow to overwrite serial and ethaddr */
  44 #define CONFIG_ENV_OVERWRITE
  45 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  46 #define CONFIG_VERSION_VARIABLE
  47 #define CONFIG_SYS_UART_PORT            (0)
  48 #define CONFIG_BAUDRATE                 115200
  49 #define CONFIG_CMD_ASKENV
  50
  51 /* NAND support */
  52 #define CONFIG_CMD_NAND
  53 #define CONFIG_SYS_NAND_ONFI_DETECTION
  54 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  55 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR
  56
  57 /* GPIO support */
  58 #define CONFIG_DM_GPIO
  59 #define CONFIG_VYBRID_GPIO
  60
  61 /* Dynamic MTD partition support */
  62 #define CONFIG_CMD_MTDPARTS     /* Enable 'mtdparts' command line support */
  63 #define CONFIG_MTD_PARTITIONS
  64 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
  65 #define MTDIDS_DEFAULT          "nand0=vf610_nfc"
  66 #define MTDPARTS_DEFAULT        "mtdparts=vf610_nfc:"           \
  67                                 "128k(vf-bcb)ro,"               \
  68                                 "1408k(u-boot)ro,"              \
  69                                 "512k(u-boot-env),"             \
  70                                 "-(ubi)"
  71
  72 #define CONFIG_MMC
  73 #define CONFIG_FSL_ESDHC
  74 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  75 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  76
  77 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
  78
  79 #define CONFIG_CMD_MMC
  80 #define CONFIG_GENERIC_MMC
  81 #define CONFIG_CMD_FAT
  82 #define CONFIG_CMD_EXT3
  83 #define CONFIG_CMD_EXT4
  84 #define CONFIG_DOS_PARTITION
  85
  86 #define CONFIG_RBTREE
  87 #define CONFIG_LZO
  88 #define CONFIG_CMD_FS_GENERIC
  89 #define CONFIG_CMD_BOOTZ
  90 #define CONFIG_CMD_UBI
  91 #define CONFIG_MTD_UBI_FASTMAP
  92 #define CONFIG_CMD_UBIFS        /* increases size by almost 60 KB */
  93
  94 #define CONFIG_CMD_PING
  95 #define CONFIG_CMD_DHCP
  96 #define CONFIG_CMD_MII
  97 #define CONFIG_FEC_MXC
  98 #define CONFIG_MII
  99 #define IMX_FEC_BASE                    ENET1_BASE_ADDR
 100 #define CONFIG_FEC_XCV_TYPE             RMII
 101 #define CONFIG_FEC_MXC_PHYADDR          0
 102 #define CONFIG_PHYLIB
 103 #define CONFIG_PHY_MICREL
 104
 105 #define CONFIG_IPADDR           192.168.10.2
 106 #define CONFIG_NETMASK          255.255.255.0
 107 #define CONFIG_SERVERIP         192.168.10.1
 108
 109 #define CONFIG_BOOTDELAY                1
 110 #define CONFIG_BOARD_LATE_INIT
 111
 112 #define CONFIG_LOADADDR                 0x80008000
 113 #define CONFIG_FDTADDR                  0x84000000
 114
 115 /* We boot from the gfxRAM area of the OCRAM. */
 116 #define CONFIG_SYS_TEXT_BASE            0x3f408000
 117 #define CONFIG_BOARD_SIZE_LIMIT         524288
 118
 119 #define SD_BOOTCMD \
 120         "sdargs=root=/dev/mmcblk0p2 rw rootwait\0"      \
 121         "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
 122         "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
 123         "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
 124         "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
 125         "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 126
 127 #define NFS_BOOTCMD \
 128         "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
 129         "nfsboot=run setup; " \
 130         "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
 131         "${setupargs} ${vidargs}; echo Booting from NFS...;" \
 132         "dhcp ${kernel_addr_r} && "     \
 133         "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
 134         "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 135
 136 #define UBI_BOOTCMD     \
 137         "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
 138         "ubi.fm_autoconvert=1\0" \
 139         "ubiboot=run setup; " \
 140         "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
 141         "${setupargs} ${vidargs}; echo Booting from NAND...; " \
 142         "ubi part ubi && ubifsmount ubi0:rootfs && " \
 143         "ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
 144         "ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
 145         "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 146
 147 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
 148
 149 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
 150
 151 #define CONFIG_EXTRA_ENV_SETTINGS \
 152         "kernel_addr_r=0x82000000\0" \
 153         "fdt_addr_r=0x84000000\0" \
 154         "kernel_file=zImage\0" \
 155         "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
 156         "fdt_board=eval-v3\0" \
 157         "defargs=\0" \
 158         "console=ttyLP0\0" \
 159         "setup=setenv setupargs " \
 160         "console=tty1 console=${console}" \
 161         ",${baudrate}n8 ${memargs}\0" \
 162         "setsdupdate=mmc rescan && set interface mmc && " \
 163         "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 164         "source ${loadaddr}\0" \
 165         "setusbupdate=usb start && set interface usb && " \
 166         "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 167         "source ${loadaddr}\0" \
 168         "setupdate=run setsdupdate || run setusbupdate\0" \
 169         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 170         "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 171         SD_BOOTCMD \
 172         NFS_BOOTCMD \
 173         UBI_BOOTCMD
 174
 175 /* Miscellaneous configurable options */
 176 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 177 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
 178 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 179 #undef CONFIG_AUTO_COMPLETE
 180 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 181 #define CONFIG_SYS_PBSIZE               \
 182                         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 183 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 184 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 185
 186 #define CONFIG_CMD_MEMTEST
 187 #define CONFIG_SYS_MEMTEST_START        0x80010000
 188 #define CONFIG_SYS_MEMTEST_END          0x87C00000
 189
 190 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 191 #define CONFIG_SYS_HZ                   1000
 192 #define CONFIG_CMDLINE_EDITING
 193
 194 /*
 195  * Stack sizes
 196  * The stack sizes are set up in start.S using the settings below
 197  */
 198 #define CONFIG_STACKSIZE                (128 * 1024)    /* regular stack */
 199
 200 /* Physical memory map */
 201 #define CONFIG_NR_DRAM_BANKS            1
 202 #define PHYS_SDRAM                      (0x80000000)
 203 #define PHYS_SDRAM_SIZE                 (256 * 1024 * 1024)
 204
 205 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 206 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 207 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 208
 209 #define CONFIG_SYS_INIT_SP_OFFSET \
 210         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 211 #define CONFIG_SYS_INIT_SP_ADDR \
 212         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 213
 214 /* Environment organization */
 215 #define CONFIG_SYS_NO_FLASH
 216
 217 #ifdef CONFIG_ENV_IS_IN_MMC
 218 #define CONFIG_SYS_MMC_ENV_DEV          0
 219 #define CONFIG_ENV_OFFSET               (12 * 64 * 1024)
 220 #define CONFIG_ENV_SIZE                 (8 * 1024)
 221 #endif
 222
 223 #ifdef CONFIG_ENV_IS_IN_NAND
 224 #define CONFIG_ENV_SIZE                 (64 * 2048)
 225 #define CONFIG_ENV_RANGE                (4 * 64 * 2048)
 226 #define CONFIG_ENV_OFFSET               (12 * 64 * 2048)
 227 #endif
 228
 229 #define CONFIG_OF_LIBFDT
 230 #define CONFIG_CMD_BOOTZ
 231
 232 #define CONFIG_SYS_NO_FLASH
 233
 234 #define CONFIG_SYS_CACHELINE_SIZE 32
 235
 236 /* USB Host Support */
 237 #define CONFIG_CMD_USB
 238 #define CONFIG_USB_EHCI
 239 #define CONFIG_USB_EHCI_VF
 240 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 241 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 242
 243 /* USB Client Support */
 244 #define CONFIG_USB_GADGET
 245 #define CONFIG_CI_UDC
 246 #define CONFIG_USB_GADGET_DUALSPEED
 247 #define CONFIG_USB_GADGET_VBUS_DRAW      2
 248 #define CONFIG_TRDX_VID                  0x1B67
 249 #define CONFIG_TRDX_PID_COLIBRI_VF50     0x0016
 250 #define CONFIG_TRDX_PID_COLIBRI_VF61     0x0017
 251 #define CONFIG_TRDX_PID_COLIBRI_VF61IT   0x0018
 252 #define CONFIG_TRDX_PID_COLIBRI_VF50IT   0x0019
 253 #define CONFIG_G_DNL_MANUFACTURER        "Toradex"
 254 #define CONFIG_G_DNL_VENDOR_NUM          CONFIG_TRDX_VID
 255 #define CONFIG_G_DNL_PRODUCT_NUM         CONFIG_TRDX_PID_COLIBRI_VF50
 256
 257 /* USB DFU */
 258 #define CONFIG_USB_GADGET_DOWNLOAD
 259 #define CONFIG_CMD_DFU
 260 #define CONFIG_USB_FUNCTION_DFU
 261 #define CONFIG_DFU_NAND
 262 #define CONFIG_DFU_MMC
 263 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
 264
 265 /* USB Storage */
 266 #define CONFIG_USB_STORAGE
 267 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 268 #define CONFIG_CMD_USB_MASS_STORAGE
 269
 270 /* Enable SPI support */
 271 #ifdef CONFIG_OF_CONTROL
 272 #define CONFIG_DM_SPI
 273 #define CONFIG_CMD_SPI
 274 #endif
 275
 276 #endif /* __CONFIG_H */