include/configs/corenet_ds.h

   1 /*
   2  * Copyright 2009-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * Corenet DS style board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include "../board/freescale/common/ics307_clk.h"
  14
  15 #ifdef CONFIG_RAMBOOT_PBL
  16 #ifdef CONFIG_SECURE_BOOT
  17 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  18 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  19 #ifdef CONFIG_NAND
  20 #define CONFIG_RAMBOOT_NAND
  21 #endif
  22 #define CONFIG_BOOTSCRIPT_COPY_RAM
  23 #else
  24 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  25 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  26 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg
  27 #if defined(CONFIG_TARGET_P3041DS)
  28 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p3041ds.cfg
  29 #elif defined(CONFIG_TARGET_P4080DS)
  30 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p4080ds.cfg
  31 #elif defined(CONFIG_TARGET_P5020DS)
  32 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5020ds.cfg
  33 #elif defined(CONFIG_TARGET_P5040DS)
  34 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5040ds.cfg
  35 #endif
  36 #endif
  37 #endif
  38
  39 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  40 /* Set 1M boot space */
  41 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  42 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  43                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  44 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  45 #endif
  46
  47 /* High Level Configuration Options */
  48 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  49 #define CONFIG_MP                       /* support multiple processors */
  50
  51 #ifndef CONFIG_SYS_TEXT_BASE
  52 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  53 #endif
  54
  55 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  56 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  57 #endif
  58
  59 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  60 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  61 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  62 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  63 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  64 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  65
  66 #define CONFIG_ENV_OVERWRITE
  67
  68 #ifndef CONFIG_MTD_NOR_FLASH
  69 #else
  70 #define CONFIG_FLASH_CFI_DRIVER
  71 #define CONFIG_SYS_FLASH_CFI
  72 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  73 #endif
  74
  75 #if defined(CONFIG_SPIFLASH)
  76 #define CONFIG_SYS_EXTRA_ENV_RELOC
  77 #define CONFIG_ENV_IS_IN_SPI_FLASH
  78 #define CONFIG_ENV_SPI_BUS              0
  79 #define CONFIG_ENV_SPI_CS               0
  80 #define CONFIG_ENV_SPI_MAX_HZ           10000000
  81 #define CONFIG_ENV_SPI_MODE             0
  82 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  83 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  84 #define CONFIG_ENV_SECT_SIZE            0x10000
  85 #elif defined(CONFIG_SDCARD)
  86 #define CONFIG_SYS_EXTRA_ENV_RELOC
  87 #define CONFIG_FSL_FIXED_MMC_LOCATION
  88 #define CONFIG_SYS_MMC_ENV_DEV          0
  89 #define CONFIG_ENV_SIZE                 0x2000
  90 #define CONFIG_ENV_OFFSET               (512 * 1658)
  91 #elif defined(CONFIG_NAND)
  92 #define CONFIG_SYS_EXTRA_ENV_RELOC
  93 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
  94 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
  95 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
  96 #define CONFIG_ENV_IS_IN_REMOTE
  97 #define CONFIG_ENV_ADDR         0xffe20000
  98 #define CONFIG_ENV_SIZE         0x2000
  99 #elif defined(CONFIG_ENV_IS_NOWHERE)
 100 #define CONFIG_ENV_SIZE         0x2000
 101 #else
 102 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 103 #define CONFIG_ENV_SIZE         0x2000
 104 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 105 #endif
 106
 107 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 108
 109 /*
 110  * These can be toggled for performance analysis, otherwise use default.
 111  */
 112 #define CONFIG_SYS_CACHE_STASHING
 113 #define CONFIG_BACKSIDE_L2_CACHE
 114 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 115 #define CONFIG_BTB                      /* toggle branch predition */
 116 #define CONFIG_DDR_ECC
 117 #ifdef CONFIG_DDR_ECC
 118 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 119 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 120 #endif
 121
 122 #define CONFIG_ENABLE_36BIT_PHYS
 123
 124 #ifdef CONFIG_PHYS_64BIT
 125 #define CONFIG_ADDR_MAP
 126 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 127 #endif
 128
 129 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 130 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 131 #define CONFIG_SYS_MEMTEST_END          0x00400000
 132 #define CONFIG_SYS_ALT_MEMTEST
 133 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 134
 135 /*
 136  *  Config the L3 Cache as L3 SRAM
 137  */
 138 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 139 #ifdef CONFIG_PHYS_64BIT
 140 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
 141 #else
 142 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
 143 #endif
 144 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
 145 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 146
 147 #ifdef CONFIG_PHYS_64BIT
 148 #define CONFIG_SYS_DCSRBAR              0xf0000000
 149 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 150 #endif
 151
 152 /* EEPROM */
 153 #define CONFIG_ID_EEPROM
 154 #define CONFIG_SYS_I2C_EEPROM_NXID
 155 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 156 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 157 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 158
 159 /*
 160  * DDR Setup
 161  */
 162 #define CONFIG_VERY_BIG_RAM
 163 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 164 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 165
 166 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 167 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 168
 169 #define CONFIG_DDR_SPD
 170
 171 #define CONFIG_SYS_SPD_BUS_NUM  1
 172 #define SPD_EEPROM_ADDRESS1     0x51
 173 #define SPD_EEPROM_ADDRESS2     0x52
 174 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 175 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 176
 177 /*
 178  * Local Bus Definitions
 179  */
 180
 181 /* Set the local bus clock 1/8 of platform clock */
 182 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 183
 184 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* Start of PromJet */
 185 #ifdef CONFIG_PHYS_64BIT
 186 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 187 #else
 188 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 189 #endif
 190
 191 #define CONFIG_SYS_FLASH_BR_PRELIM \
 192                 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) \
 193                  | BR_PS_16 | BR_V)
 194 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 195                                         | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 196
 197 #define CONFIG_SYS_BR1_PRELIM \
 198         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 199 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 200
 201 #define PIXIS_BASE              0xffdf0000      /* PIXIS registers */
 202 #ifdef CONFIG_PHYS_64BIT
 203 #define PIXIS_BASE_PHYS         0xfffdf0000ull
 204 #else
 205 #define PIXIS_BASE_PHYS         PIXIS_BASE
 206 #endif
 207
 208 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 209 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 210
 211 #define PIXIS_LBMAP_SWITCH      7
 212 #define PIXIS_LBMAP_MASK        0xf0
 213 #define PIXIS_LBMAP_SHIFT       4
 214 #define PIXIS_LBMAP_ALTBANK     0x40
 215
 216 #define CONFIG_SYS_FLASH_QUIET_TEST
 217 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 218
 219 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 220 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 221 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 222 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 223
 224 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 225
 226 #if defined(CONFIG_RAMBOOT_PBL)
 227 #define CONFIG_SYS_RAMBOOT
 228 #endif
 229
 230 /* Nand Flash */
 231 #ifdef CONFIG_NAND_FSL_ELBC
 232 #define CONFIG_SYS_NAND_BASE            0xffa00000
 233 #ifdef CONFIG_PHYS_64BIT
 234 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 235 #else
 236 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 237 #endif
 238
 239 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 240 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 241 #define CONFIG_CMD_NAND
 242 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 243
 244 /* NAND flash config */
 245 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 246                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 247                                | BR_PS_8               /* Port Size = 8 bit */ \
 248                                | BR_MS_FCM             /* MSEL = FCM */ \
 249                                | BR_V)                 /* valid */
 250 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 251                                | OR_FCM_PGS            /* Large Page*/ \
 252                                | OR_FCM_CSCT \
 253                                | OR_FCM_CST \
 254                                | OR_FCM_CHT \
 255                                | OR_FCM_SCY_1 \
 256                                | OR_FCM_TRLX \
 257                                | OR_FCM_EHTR)
 258
 259 #ifdef CONFIG_NAND
 260 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 261 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 262 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 263 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 264 #else
 265 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 266 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 267 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 268 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 269 #endif
 270 #else
 271 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 272 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 273 #endif /* CONFIG_NAND_FSL_ELBC */
 274
 275 #define CONFIG_SYS_FLASH_EMPTY_INFO
 276 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 277 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 278
 279 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 280 #define CONFIG_MISC_INIT_R
 281
 282 #define CONFIG_HWCONFIG
 283
 284 /* define to use L1 as initial stack */
 285 #define CONFIG_L1_INIT_RAM
 286 #define CONFIG_SYS_INIT_RAM_LOCK
 287 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 288 #ifdef CONFIG_PHYS_64BIT
 289 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 290 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 291 /* The assembler doesn't like typecast */
 292 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 293         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 294           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 295 #else
 296 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
 297 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 298 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 299 #endif
 300 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000      /* Size of used area in RAM */
 301
 302 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 303 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 304
 305 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 306 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 307
 308 /* Serial Port - controlled on board with jumper J8
 309  * open - index 2
 310  * shorted - index 1
 311  */
 312 #define CONFIG_CONS_INDEX       1
 313 #define CONFIG_SYS_NS16550_SERIAL
 314 #define CONFIG_SYS_NS16550_REG_SIZE     1
 315 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 316
 317 #define CONFIG_SYS_BAUDRATE_TABLE       \
 318         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 319
 320 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 321 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 322 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 323 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 324
 325 /* I2C */
 326 #define CONFIG_SYS_I2C
 327 #define CONFIG_SYS_I2C_FSL
 328 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 329 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 330 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 331 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 332 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 333 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 334
 335 /*
 336  * RapidIO
 337  */
 338 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 339 #ifdef CONFIG_PHYS_64BIT
 340 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 341 #else
 342 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 343 #endif
 344 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 345
 346 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 347 #ifdef CONFIG_PHYS_64BIT
 348 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 349 #else
 350 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 351 #endif
 352 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 353
 354 /*
 355  * for slave u-boot IMAGE instored in master memory space,
 356  * PHYS must be aligned based on the SIZE
 357  */
 358 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 359 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 360 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 361 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 362 /*
 363  * for slave UCODE and ENV instored in master memory space,
 364  * PHYS must be aligned based on the SIZE
 365  */
 366 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 367 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 368 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 369
 370 /* slave core release by master*/
 371 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 372 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 373
 374 /*
 375  * SRIO_PCIE_BOOT - SLAVE
 376  */
 377 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 378 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 379 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 380                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 381 #endif
 382
 383 /*
 384  * eSPI - Enhanced SPI
 385  */
 386 #define CONFIG_SF_DEFAULT_SPEED         10000000
 387 #define CONFIG_SF_DEFAULT_MODE          0
 388
 389 /*
 390  * General PCI
 391  * Memory space is mapped 1-1, but I/O space must start from 0.
 392  */
 393
 394 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 395 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 396 #ifdef CONFIG_PHYS_64BIT
 397 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 398 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 399 #else
 400 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 401 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 402 #endif
 403 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 404 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 405 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 406 #ifdef CONFIG_PHYS_64BIT
 407 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 408 #else
 409 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 410 #endif
 411 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 412
 413 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 414 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 415 #ifdef CONFIG_PHYS_64BIT
 416 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 417 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 418 #else
 419 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 420 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 421 #endif
 422 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 423 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 424 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 425 #ifdef CONFIG_PHYS_64BIT
 426 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 427 #else
 428 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 429 #endif
 430 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 431
 432 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 433 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 434 #ifdef CONFIG_PHYS_64BIT
 435 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 436 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 437 #else
 438 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 439 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 440 #endif
 441 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 442 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 443 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 444 #ifdef CONFIG_PHYS_64BIT
 445 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 446 #else
 447 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 448 #endif
 449 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 450
 451 /* controller 4, Base address 203000 */
 452 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 453 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 454 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 455 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 456 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 457 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 458
 459 /* Qman/Bman */
 460 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 461 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 462 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 463 #ifdef CONFIG_PHYS_64BIT
 464 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 465 #else
 466 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 467 #endif
 468 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 469 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 470 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 471 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 472 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 473 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 474                                         CONFIG_SYS_BMAN_CENA_SIZE)
 475 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 476 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 477 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 478 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 479 #ifdef CONFIG_PHYS_64BIT
 480 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 481 #else
 482 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 483 #endif
 484 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 485 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 486 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 487 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 488 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 489 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 490                                         CONFIG_SYS_QMAN_CENA_SIZE)
 491 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 492 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 493
 494 #define CONFIG_SYS_DPAA_FMAN
 495 #define CONFIG_SYS_DPAA_PME
 496 /* Default address of microcode for the Linux Fman driver */
 497 #if defined(CONFIG_SPIFLASH)
 498 /*
 499  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 500  * env, so we got 0x110000.
 501  */
 502 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 503 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 504 #elif defined(CONFIG_SDCARD)
 505 /*
 506  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 507  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 508  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 509  */
 510 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 511 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 512 #elif defined(CONFIG_NAND)
 513 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 514 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 515 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 516 /*
 517  * Slave has no ucode locally, it can fetch this from remote. When implementing
 518  * in two corenet boards, slave's ucode could be stored in master's memory
 519  * space, the address can be mapped from slave TLB->slave LAW->
 520  * slave SRIO or PCIE outbound window->master inbound window->
 521  * master LAW->the ucode address in master's memory space.
 522  */
 523 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 524 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 525 #else
 526 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 527 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 528 #endif
 529 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 530 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 531
 532 #ifdef CONFIG_SYS_DPAA_FMAN
 533 #define CONFIG_FMAN_ENET
 534 #define CONFIG_PHYLIB_10G
 535 #define CONFIG_PHY_VITESSE
 536 #define CONFIG_PHY_TERANETICS
 537 #endif
 538
 539 #ifdef CONFIG_PCI
 540 #define CONFIG_PCI_INDIRECT_BRIDGE
 541
 542 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 543 #endif  /* CONFIG_PCI */
 544
 545 /* SATA */
 546 #ifdef CONFIG_FSL_SATA_V2
 547 #define CONFIG_LIBATA
 548 #define CONFIG_FSL_SATA
 549
 550 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 551 #define CONFIG_SATA1
 552 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 553 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 554 #define CONFIG_SATA2
 555 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 556 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 557
 558 #define CONFIG_LBA48
 559 #endif
 560
 561 #ifdef CONFIG_FMAN_ENET
 562 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x1c
 563 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x1d
 564 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x1e
 565 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1f
 566 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  4
 567
 568 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR  0x1c
 569 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR  0x1d
 570 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR  0x1e
 571 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR  0x1f
 572 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR  0
 573
 574 #define CONFIG_SYS_TBIPA_VALUE  8
 575 #define CONFIG_MII              /* MII PHY management */
 576 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 577 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 578 #endif
 579
 580 /*
 581  * Environment
 582  */
 583 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 584 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 585
 586 /*
 587  * Command line configuration.
 588  */
 589 #define CONFIG_CMD_REGINFO
 590
 591 #ifdef CONFIG_PCI
 592 #define CONFIG_CMD_PCI
 593 #endif
 594
 595 /*
 596 * USB
 597 */
 598 #define CONFIG_HAS_FSL_DR_USB
 599 #define CONFIG_HAS_FSL_MPH_USB
 600
 601 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 602 #define CONFIG_USB_EHCI_FSL
 603 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 604 #endif
 605
 606 #ifdef CONFIG_MMC
 607 #define CONFIG_FSL_ESDHC
 608 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 609 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 610 #endif
 611
 612 /*
 613  * Miscellaneous configurable options
 614  */
 615 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 616 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 617 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 618 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 619 #ifdef CONFIG_CMD_KGDB
 620 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 621 #else
 622 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 623 #endif
 624 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 625 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 626 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 627
 628 /*
 629  * For booting Linux, the board info and command line data
 630  * have to be in the first 64 MB of memory, since this is
 631  * the maximum mapped by the Linux kernel during initialization.
 632  */
 633 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 634 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 635
 636 #ifdef CONFIG_CMD_KGDB
 637 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 638 #endif
 639
 640 /*
 641  * Environment Configuration
 642  */
 643 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 644 #define CONFIG_BOOTFILE         "uImage"
 645 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 646
 647 /* default location for tftp and bootm */
 648 #define CONFIG_LOADADDR         1000000
 649
 650 #ifdef CONFIG_TARGET_P4080DS
 651 #define __USB_PHY_TYPE  ulpi
 652 #else
 653 #define __USB_PHY_TYPE  utmi
 654 #endif
 655
 656 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 657         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 658         "bank_intlv=cs0_cs1;"                                   \
 659         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 660         "usb2:dr_mode=peripheral,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 661         "netdev=eth0\0"                                         \
 662         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 663         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 664         "tftpflash=tftpboot $loadaddr $uboot && "               \
 665         "protect off $ubootaddr +$filesize && "                 \
 666         "erase $ubootaddr +$filesize && "                       \
 667         "cp.b $loadaddr $ubootaddr $filesize && "               \
 668         "protect on $ubootaddr +$filesize && "                  \
 669         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 670         "consoledev=ttyS0\0"                                    \
 671         "ramdiskaddr=2000000\0"                                 \
 672         "ramdiskfile=p4080ds/ramdisk.uboot\0"                   \
 673         "fdtaddr=1e00000\0"                                     \
 674         "fdtfile=p4080ds/p4080ds.dtb\0"                         \
 675         "bdev=sda3\0"
 676
 677 #define CONFIG_HDBOOT                                   \
 678         "setenv bootargs root=/dev/$bdev rw "           \
 679         "console=$consoledev,$baudrate $othbootargs;"   \
 680         "tftp $loadaddr $bootfile;"                     \
 681         "tftp $fdtaddr $fdtfile;"                       \
 682         "bootm $loadaddr - $fdtaddr"
 683
 684 #define CONFIG_NFSBOOTCOMMAND                   \
 685         "setenv bootargs root=/dev/nfs rw "     \
 686         "nfsroot=$serverip:$rootpath "          \
 687         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 688         "console=$consoledev,$baudrate $othbootargs;"   \
 689         "tftp $loadaddr $bootfile;"             \
 690         "tftp $fdtaddr $fdtfile;"               \
 691         "bootm $loadaddr - $fdtaddr"
 692
 693 #define CONFIG_RAMBOOTCOMMAND                           \
 694         "setenv bootargs root=/dev/ram rw "             \
 695         "console=$consoledev,$baudrate $othbootargs;"   \
 696         "tftp $ramdiskaddr $ramdiskfile;"               \
 697         "tftp $loadaddr $bootfile;"                     \
 698         "tftp $fdtaddr $fdtfile;"                       \
 699         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 700
 701 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 702
 703 #include <asm/fsl_secure_boot.h>
 704
 705 #endif  /* __CONFIG_H */