include/configs/corenet_ds.h

   1 /*
   2  * Copyright 2009-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * Corenet DS style board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include "../board/freescale/common/ics307_clk.h"
  14
  15 #ifdef CONFIG_RAMBOOT_PBL
  16 #ifdef CONFIG_SECURE_BOOT
  17 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  18 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  19 #ifdef CONFIG_NAND
  20 #define CONFIG_RAMBOOT_NAND
  21 #endif
  22 #define CONFIG_BOOTSCRIPT_COPY_RAM
  23 #else
  24 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  25 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  26 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg
  27 #if defined(CONFIG_TARGET_P3041DS)
  28 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p3041ds.cfg
  29 #elif defined(CONFIG_TARGET_P4080DS)
  30 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p4080ds.cfg
  31 #elif defined(CONFIG_TARGET_P5020DS)
  32 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5020ds.cfg
  33 #elif defined(CONFIG_TARGET_P5040DS)
  34 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5040ds.cfg
  35 #endif
  36 #endif
  37 #endif
  38
  39 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  40 /* Set 1M boot space */
  41 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  42 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  43                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  44 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  45 #endif
  46
  47 /* High Level Configuration Options */
  48 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  49 #define CONFIG_MP                       /* support multiple processors */
  50
  51 #ifndef CONFIG_SYS_TEXT_BASE
  52 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  53 #endif
  54
  55 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  56 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  57 #endif
  58
  59 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  60 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  61 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  62 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  63 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  64 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  65
  66 #define CONFIG_ENV_OVERWRITE
  67
  68 #ifndef CONFIG_MTD_NOR_FLASH
  69 #else
  70 #define CONFIG_FLASH_CFI_DRIVER
  71 #define CONFIG_SYS_FLASH_CFI
  72 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  73 #endif
  74
  75 #if defined(CONFIG_SPIFLASH)
  76 #define CONFIG_SYS_EXTRA_ENV_RELOC
  77 #define CONFIG_ENV_SPI_BUS              0
  78 #define CONFIG_ENV_SPI_CS               0
  79 #define CONFIG_ENV_SPI_MAX_HZ           10000000
  80 #define CONFIG_ENV_SPI_MODE             0
  81 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  82 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  83 #define CONFIG_ENV_SECT_SIZE            0x10000
  84 #elif defined(CONFIG_SDCARD)
  85 #define CONFIG_SYS_EXTRA_ENV_RELOC
  86 #define CONFIG_FSL_FIXED_MMC_LOCATION
  87 #define CONFIG_SYS_MMC_ENV_DEV          0
  88 #define CONFIG_ENV_SIZE                 0x2000
  89 #define CONFIG_ENV_OFFSET               (512 * 1658)
  90 #elif defined(CONFIG_NAND)
  91 #define CONFIG_SYS_EXTRA_ENV_RELOC
  92 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
  93 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
  94 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
  95 #define CONFIG_ENV_IS_IN_REMOTE
  96 #define CONFIG_ENV_ADDR         0xffe20000
  97 #define CONFIG_ENV_SIZE         0x2000
  98 #elif defined(CONFIG_ENV_IS_NOWHERE)
  99 #define CONFIG_ENV_SIZE         0x2000
 100 #else
 101 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 102 #define CONFIG_ENV_SIZE         0x2000
 103 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 104 #endif
 105
 106 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 107
 108 /*
 109  * These can be toggled for performance analysis, otherwise use default.
 110  */
 111 #define CONFIG_SYS_CACHE_STASHING
 112 #define CONFIG_BACKSIDE_L2_CACHE
 113 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 114 #define CONFIG_BTB                      /* toggle branch predition */
 115 #define CONFIG_DDR_ECC
 116 #ifdef CONFIG_DDR_ECC
 117 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 118 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 119 #endif
 120
 121 #define CONFIG_ENABLE_36BIT_PHYS
 122
 123 #ifdef CONFIG_PHYS_64BIT
 124 #define CONFIG_ADDR_MAP
 125 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 126 #endif
 127
 128 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 129 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 130 #define CONFIG_SYS_MEMTEST_END          0x00400000
 131 #define CONFIG_SYS_ALT_MEMTEST
 132 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 133
 134 /*
 135  *  Config the L3 Cache as L3 SRAM
 136  */
 137 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 138 #ifdef CONFIG_PHYS_64BIT
 139 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
 140 #else
 141 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
 142 #endif
 143 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
 144 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 145
 146 #ifdef CONFIG_PHYS_64BIT
 147 #define CONFIG_SYS_DCSRBAR              0xf0000000
 148 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 149 #endif
 150
 151 /* EEPROM */
 152 #define CONFIG_ID_EEPROM
 153 #define CONFIG_SYS_I2C_EEPROM_NXID
 154 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 155 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 156 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 157
 158 /*
 159  * DDR Setup
 160  */
 161 #define CONFIG_VERY_BIG_RAM
 162 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 163 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 164
 165 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 166 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 167
 168 #define CONFIG_DDR_SPD
 169
 170 #define CONFIG_SYS_SPD_BUS_NUM  1
 171 #define SPD_EEPROM_ADDRESS1     0x51
 172 #define SPD_EEPROM_ADDRESS2     0x52
 173 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 174 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 175
 176 /*
 177  * Local Bus Definitions
 178  */
 179
 180 /* Set the local bus clock 1/8 of platform clock */
 181 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 182
 183 #define CONFIG_SYS_FLASH_BASE           0xe0000000      /* Start of PromJet */
 184 #ifdef CONFIG_PHYS_64BIT
 185 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 186 #else
 187 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 188 #endif
 189
 190 #define CONFIG_SYS_FLASH_BR_PRELIM \
 191                 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) \
 192                  | BR_PS_16 | BR_V)
 193 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 194                                         | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 195
 196 #define CONFIG_SYS_BR1_PRELIM \
 197         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 198 #define CONFIG_SYS_OR1_PRELIM   0xf8000ff7
 199
 200 #define PIXIS_BASE              0xffdf0000      /* PIXIS registers */
 201 #ifdef CONFIG_PHYS_64BIT
 202 #define PIXIS_BASE_PHYS         0xfffdf0000ull
 203 #else
 204 #define PIXIS_BASE_PHYS         PIXIS_BASE
 205 #endif
 206
 207 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 208 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 209
 210 #define PIXIS_LBMAP_SWITCH      7
 211 #define PIXIS_LBMAP_MASK        0xf0
 212 #define PIXIS_LBMAP_SHIFT       4
 213 #define PIXIS_LBMAP_ALTBANK     0x40
 214
 215 #define CONFIG_SYS_FLASH_QUIET_TEST
 216 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 217
 218 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 219 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 220 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 221 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 222
 223 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 224
 225 #if defined(CONFIG_RAMBOOT_PBL)
 226 #define CONFIG_SYS_RAMBOOT
 227 #endif
 228
 229 /* Nand Flash */
 230 #ifdef CONFIG_NAND_FSL_ELBC
 231 #define CONFIG_SYS_NAND_BASE            0xffa00000
 232 #ifdef CONFIG_PHYS_64BIT
 233 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 234 #else
 235 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 236 #endif
 237
 238 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 239 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 240 #define CONFIG_CMD_NAND
 241 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 242
 243 /* NAND flash config */
 244 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 245                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 246                                | BR_PS_8               /* Port Size = 8 bit */ \
 247                                | BR_MS_FCM             /* MSEL = FCM */ \
 248                                | BR_V)                 /* valid */
 249 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 250                                | OR_FCM_PGS            /* Large Page*/ \
 251                                | OR_FCM_CSCT \
 252                                | OR_FCM_CST \
 253                                | OR_FCM_CHT \
 254                                | OR_FCM_SCY_1 \
 255                                | OR_FCM_TRLX \
 256                                | OR_FCM_EHTR)
 257
 258 #ifdef CONFIG_NAND
 259 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 260 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 261 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 262 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 263 #else
 264 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 265 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 266 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 267 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 268 #endif
 269 #else
 270 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 271 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 272 #endif /* CONFIG_NAND_FSL_ELBC */
 273
 274 #define CONFIG_SYS_FLASH_EMPTY_INFO
 275 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 276 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 277
 278 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 279 #define CONFIG_MISC_INIT_R
 280
 281 #define CONFIG_HWCONFIG
 282
 283 /* define to use L1 as initial stack */
 284 #define CONFIG_L1_INIT_RAM
 285 #define CONFIG_SYS_INIT_RAM_LOCK
 286 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 287 #ifdef CONFIG_PHYS_64BIT
 288 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 289 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 290 /* The assembler doesn't like typecast */
 291 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 292         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 293           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 294 #else
 295 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
 296 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 297 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 298 #endif
 299 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000      /* Size of used area in RAM */
 300
 301 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 302 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 303
 304 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 305 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 306
 307 /* Serial Port - controlled on board with jumper J8
 308  * open - index 2
 309  * shorted - index 1
 310  */
 311 #define CONFIG_CONS_INDEX       1
 312 #define CONFIG_SYS_NS16550_SERIAL
 313 #define CONFIG_SYS_NS16550_REG_SIZE     1
 314 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 315
 316 #define CONFIG_SYS_BAUDRATE_TABLE       \
 317         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 318
 319 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 320 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 321 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 322 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 323
 324 /* I2C */
 325 #define CONFIG_SYS_I2C
 326 #define CONFIG_SYS_I2C_FSL
 327 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 328 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 329 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 330 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 331 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 332 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 333
 334 /*
 335  * RapidIO
 336  */
 337 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 338 #ifdef CONFIG_PHYS_64BIT
 339 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 340 #else
 341 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 342 #endif
 343 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 344
 345 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 346 #ifdef CONFIG_PHYS_64BIT
 347 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 348 #else
 349 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 350 #endif
 351 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 352
 353 /*
 354  * for slave u-boot IMAGE instored in master memory space,
 355  * PHYS must be aligned based on the SIZE
 356  */
 357 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 358 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 359 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 360 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 361 /*
 362  * for slave UCODE and ENV instored in master memory space,
 363  * PHYS must be aligned based on the SIZE
 364  */
 365 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 366 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 367 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 368
 369 /* slave core release by master*/
 370 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 371 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 372
 373 /*
 374  * SRIO_PCIE_BOOT - SLAVE
 375  */
 376 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 377 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 378 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 379                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 380 #endif
 381
 382 /*
 383  * eSPI - Enhanced SPI
 384  */
 385 #define CONFIG_SF_DEFAULT_SPEED         10000000
 386 #define CONFIG_SF_DEFAULT_MODE          0
 387
 388 /*
 389  * General PCI
 390  * Memory space is mapped 1-1, but I/O space must start from 0.
 391  */
 392
 393 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 394 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 395 #ifdef CONFIG_PHYS_64BIT
 396 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 397 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 398 #else
 399 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 400 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 401 #endif
 402 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 403 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 404 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 405 #ifdef CONFIG_PHYS_64BIT
 406 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 407 #else
 408 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 409 #endif
 410 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 411
 412 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 413 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 414 #ifdef CONFIG_PHYS_64BIT
 415 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 416 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 417 #else
 418 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 419 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 420 #endif
 421 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 422 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 423 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 424 #ifdef CONFIG_PHYS_64BIT
 425 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 426 #else
 427 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 428 #endif
 429 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 430
 431 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 432 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 433 #ifdef CONFIG_PHYS_64BIT
 434 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 435 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 436 #else
 437 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 438 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 439 #endif
 440 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 441 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 442 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 443 #ifdef CONFIG_PHYS_64BIT
 444 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 445 #else
 446 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 447 #endif
 448 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 449
 450 /* controller 4, Base address 203000 */
 451 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 452 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 453 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 454 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 455 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 456 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 457
 458 /* Qman/Bman */
 459 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 460 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 461 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 462 #ifdef CONFIG_PHYS_64BIT
 463 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 464 #else
 465 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 466 #endif
 467 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 468 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 469 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 470 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 471 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 472 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 473                                         CONFIG_SYS_BMAN_CENA_SIZE)
 474 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 475 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 476 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 477 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 478 #ifdef CONFIG_PHYS_64BIT
 479 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 480 #else
 481 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 482 #endif
 483 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 484 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 485 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 486 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 487 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 488 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 489                                         CONFIG_SYS_QMAN_CENA_SIZE)
 490 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 491 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 492
 493 #define CONFIG_SYS_DPAA_FMAN
 494 #define CONFIG_SYS_DPAA_PME
 495 /* Default address of microcode for the Linux Fman driver */
 496 #if defined(CONFIG_SPIFLASH)
 497 /*
 498  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 499  * env, so we got 0x110000.
 500  */
 501 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 502 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 503 #elif defined(CONFIG_SDCARD)
 504 /*
 505  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 506  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 507  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 508  */
 509 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 510 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 511 #elif defined(CONFIG_NAND)
 512 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 513 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 514 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 515 /*
 516  * Slave has no ucode locally, it can fetch this from remote. When implementing
 517  * in two corenet boards, slave's ucode could be stored in master's memory
 518  * space, the address can be mapped from slave TLB->slave LAW->
 519  * slave SRIO or PCIE outbound window->master inbound window->
 520  * master LAW->the ucode address in master's memory space.
 521  */
 522 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 523 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 524 #else
 525 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 526 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 527 #endif
 528 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 529 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 530
 531 #ifdef CONFIG_SYS_DPAA_FMAN
 532 #define CONFIG_FMAN_ENET
 533 #define CONFIG_PHYLIB_10G
 534 #define CONFIG_PHY_VITESSE
 535 #define CONFIG_PHY_TERANETICS
 536 #endif
 537
 538 #ifdef CONFIG_PCI
 539 #define CONFIG_PCI_INDIRECT_BRIDGE
 540
 541 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 542 #endif  /* CONFIG_PCI */
 543
 544 /* SATA */
 545 #ifdef CONFIG_FSL_SATA_V2
 546 #define CONFIG_LIBATA
 547 #define CONFIG_FSL_SATA
 548
 549 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 550 #define CONFIG_SATA1
 551 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 552 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 553 #define CONFIG_SATA2
 554 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 555 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 556
 557 #define CONFIG_LBA48
 558 #endif
 559
 560 #ifdef CONFIG_FMAN_ENET
 561 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x1c
 562 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x1d
 563 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x1e
 564 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1f
 565 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  4
 566
 567 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR  0x1c
 568 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR  0x1d
 569 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR  0x1e
 570 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR  0x1f
 571 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR  0
 572
 573 #define CONFIG_SYS_TBIPA_VALUE  8
 574 #define CONFIG_MII              /* MII PHY management */
 575 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 576 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 577 #endif
 578
 579 /*
 580  * Environment
 581  */
 582 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 583 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 584
 585 /*
 586  * Command line configuration.
 587  */
 588 #define CONFIG_CMD_REGINFO
 589
 590 #ifdef CONFIG_PCI
 591 #define CONFIG_CMD_PCI
 592 #endif
 593
 594 /*
 595 * USB
 596 */
 597 #define CONFIG_HAS_FSL_DR_USB
 598 #define CONFIG_HAS_FSL_MPH_USB
 599
 600 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 601 #define CONFIG_USB_EHCI_FSL
 602 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 603 #endif
 604
 605 #ifdef CONFIG_MMC
 606 #define CONFIG_FSL_ESDHC
 607 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 608 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 609 #endif
 610
 611 /*
 612  * Miscellaneous configurable options
 613  */
 614 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 615 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 616 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 617 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 618 #ifdef CONFIG_CMD_KGDB
 619 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 620 #else
 621 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 622 #endif
 623 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 624 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 625 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 626
 627 /*
 628  * For booting Linux, the board info and command line data
 629  * have to be in the first 64 MB of memory, since this is
 630  * the maximum mapped by the Linux kernel during initialization.
 631  */
 632 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 633 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 634
 635 #ifdef CONFIG_CMD_KGDB
 636 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 637 #endif
 638
 639 /*
 640  * Environment Configuration
 641  */
 642 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 643 #define CONFIG_BOOTFILE         "uImage"
 644 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 645
 646 /* default location for tftp and bootm */
 647 #define CONFIG_LOADADDR         1000000
 648
 649 #ifdef CONFIG_TARGET_P4080DS
 650 #define __USB_PHY_TYPE  ulpi
 651 #else
 652 #define __USB_PHY_TYPE  utmi
 653 #endif
 654
 655 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 656         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 657         "bank_intlv=cs0_cs1;"                                   \
 658         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 659         "usb2:dr_mode=peripheral,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 660         "netdev=eth0\0"                                         \
 661         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 662         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 663         "tftpflash=tftpboot $loadaddr $uboot && "               \
 664         "protect off $ubootaddr +$filesize && "                 \
 665         "erase $ubootaddr +$filesize && "                       \
 666         "cp.b $loadaddr $ubootaddr $filesize && "               \
 667         "protect on $ubootaddr +$filesize && "                  \
 668         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 669         "consoledev=ttyS0\0"                                    \
 670         "ramdiskaddr=2000000\0"                                 \
 671         "ramdiskfile=p4080ds/ramdisk.uboot\0"                   \
 672         "fdtaddr=1e00000\0"                                     \
 673         "fdtfile=p4080ds/p4080ds.dtb\0"                         \
 674         "bdev=sda3\0"
 675
 676 #define CONFIG_HDBOOT                                   \
 677         "setenv bootargs root=/dev/$bdev rw "           \
 678         "console=$consoledev,$baudrate $othbootargs;"   \
 679         "tftp $loadaddr $bootfile;"                     \
 680         "tftp $fdtaddr $fdtfile;"                       \
 681         "bootm $loadaddr - $fdtaddr"
 682
 683 #define CONFIG_NFSBOOTCOMMAND                   \
 684         "setenv bootargs root=/dev/nfs rw "     \
 685         "nfsroot=$serverip:$rootpath "          \
 686         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 687         "console=$consoledev,$baudrate $othbootargs;"   \
 688         "tftp $loadaddr $bootfile;"             \
 689         "tftp $fdtaddr $fdtfile;"               \
 690         "bootm $loadaddr - $fdtaddr"
 691
 692 #define CONFIG_RAMBOOTCOMMAND                           \
 693         "setenv bootargs root=/dev/ram rw "             \
 694         "console=$consoledev,$baudrate $othbootargs;"   \
 695         "tftp $ramdiskaddr $ramdiskfile;"               \
 696         "tftp $loadaddr $bootfile;"                     \
 697         "tftp $fdtaddr $fdtfile;"                       \
 698         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 699
 700 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 701
 702 #include <asm/fsl_secure_boot.h>
 703
 704 #endif  /* __CONFIG_H */