include/configs/cyrus.h

   1 /*
   2  * Based on corenet_ds.h
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_CYRUS
  11
  12 #if !defined(CONFIG_ARCH_P5020) && !defined(CONFIG_ARCH_P5040)
  13 #error Must call Cyrus CONFIG with a specific CPU enabled.
  14 #endif
  15
  16 #define CONFIG_SDCARD
  17 #define CONFIG_FSL_SATA_V2
  18 #define CONFIG_PCIE3
  19 #define CONFIG_PCIE4
  20 #ifdef CONFIG_ARCH_P5020
  21 #define CONFIG_SYS_FSL_RAID_ENGINE
  22 #define CONFIG_SYS_DPAA_RMAN
  23 #endif
  24 #define CONFIG_SYS_DPAA_PME
  25
  26 /*
  27  * Corenet DS style board configuration file
  28  */
  29 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  30 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  31 #define CONFIG_SYS_FSL_PBL_PBI board/varisys/cyrus/pbi.cfg
  32 #if defined(CONFIG_ARCH_P5020)
  33 #define CONFIG_SYS_CLK_FREQ 133000000
  34 #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5020_v2.cfg
  35 #elif defined(CONFIG_ARCH_P5040)
  36 #define CONFIG_SYS_CLK_FREQ 100000000
  37 #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5040.cfg
  38 #endif
  39
  40 /* High Level Configuration Options */
  41 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  42 #define CONFIG_MP                       /* support multiple processors */
  43
  44 #define CONFIG_SYS_MMC_MAX_DEVICE     1
  45
  46 #ifndef CONFIG_SYS_TEXT_BASE
  47 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  48 #endif
  49
  50 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  51 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  52 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  53 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  54 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  55 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  56
  57 #define CONFIG_ENV_OVERWRITE
  58
  59 #if defined(CONFIG_SDCARD)
  60 #define CONFIG_SYS_EXTRA_ENV_RELOC
  61 #define CONFIG_ENV_IS_IN_MMC
  62 #define CONFIG_FSL_FIXED_MMC_LOCATION
  63 #define CONFIG_SYS_MMC_ENV_DEV          0
  64 #define CONFIG_ENV_SIZE                 0x2000
  65 #define CONFIG_ENV_OFFSET               (512 * 1658)
  66 #endif
  67
  68 /*
  69  * These can be toggled for performance analysis, otherwise use default.
  70  */
  71 #define CONFIG_SYS_CACHE_STASHING
  72 #define CONFIG_BACKSIDE_L2_CACHE
  73 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
  74 #define CONFIG_BTB                      /* toggle branch predition */
  75 #define CONFIG_DDR_ECC
  76 #ifdef CONFIG_DDR_ECC
  77 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  78 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  79 #endif
  80
  81 #define CONFIG_ENABLE_36BIT_PHYS
  82
  83 #ifdef CONFIG_PHYS_64BIT
  84 #define CONFIG_ADDR_MAP
  85 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
  86 #endif
  87
  88 /* test POST memory test */
  89 #undef CONFIG_POST
  90 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
  91 #define CONFIG_SYS_MEMTEST_END          0x00400000
  92 #define CONFIG_SYS_ALT_MEMTEST
  93 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
  94
  95 /*
  96  *  Config the L3 Cache as L3 SRAM
  97  */
  98 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
  99 #ifdef CONFIG_PHYS_64BIT
 100 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
 101 #else
 102 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
 103 #endif
 104 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
 105 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 106
 107 #ifdef CONFIG_PHYS_64BIT
 108 #define CONFIG_SYS_DCSRBAR              0xf0000000
 109 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 110 #endif
 111
 112 /*
 113  * DDR Setup
 114  */
 115 #define CONFIG_VERY_BIG_RAM
 116 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 117 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 118
 119 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 120 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 121
 122 #define CONFIG_DDR_SPD
 123
 124 #define CONFIG_SYS_SPD_BUS_NUM  1
 125 #define SPD_EEPROM_ADDRESS1     0x51
 126 #define SPD_EEPROM_ADDRESS2     0x52
 127 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 128
 129 /*
 130  * Local Bus Definitions
 131  */
 132
 133 #define CONFIG_SYS_LBC0_BASE            0xe0000000 /* Start of LBC Registers */
 134 #ifdef CONFIG_PHYS_64BIT
 135 #define CONFIG_SYS_LBC0_BASE_PHYS       0xfe0000000ull
 136 #else
 137 #define CONFIG_SYS_LBC0_BASE_PHYS       CONFIG_SYS_LBC0_BASE
 138 #endif
 139
 140 #define CONFIG_SYS_LBC1_BASE            0xe1000000 /* Start of LBC Registers */
 141 #ifdef CONFIG_PHYS_64BIT
 142 #define CONFIG_SYS_LBC1_BASE_PHYS       0xfe1000000ull
 143 #else
 144 #define CONFIG_SYS_LBC1_BASE_PHYS       CONFIG_SYS_LBC1_BASE
 145 #endif
 146
 147 /* Set the local bus clock 1/16 of platform clock */
 148 #define CONFIG_SYS_LBC_LCRR             (LCRR_CLKDIV_16 | LCRR_EADC_1)
 149
 150 #define CONFIG_SYS_BR0_PRELIM \
 151 (BR_PHYS_ADDR(CONFIG_SYS_LBC0_BASE_PHYS) | BR_PS_16 | BR_V)
 152 #define CONFIG_SYS_BR1_PRELIM \
 153 (BR_PHYS_ADDR(CONFIG_SYS_LBC1_BASE_PHYS) | BR_PS_16 | BR_V)
 154
 155 #define CONFIG_SYS_OR0_PRELIM   0xfff00010
 156 #define CONFIG_SYS_OR1_PRELIM   0xfff00010
 157
 158 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 159
 160 #if defined(CONFIG_RAMBOOT_PBL)
 161 #define CONFIG_SYS_RAMBOOT
 162 #endif
 163
 164 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 165 #define CONFIG_MISC_INIT_R
 166
 167 #define CONFIG_HWCONFIG
 168
 169 /* define to use L1 as initial stack */
 170 #define CONFIG_L1_INIT_RAM
 171 #define CONFIG_SYS_INIT_RAM_LOCK
 172 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 173 #ifdef CONFIG_PHYS_64BIT
 174 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 175 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 176 /* The assembler doesn't like typecast */
 177 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 178         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 179           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 180 #else
 181 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
 182 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 183 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 184 #endif
 185 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000      /* Size of used area in RAM */
 186
 187 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 188 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 189
 190 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 191 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 192
 193 /* Serial Port - controlled on board with jumper J8
 194  * open - index 2
 195  * shorted - index 1
 196  */
 197 #define CONFIG_CONS_INDEX       1
 198 #define CONFIG_SYS_NS16550_SERIAL
 199 #define CONFIG_SYS_NS16550_REG_SIZE     1
 200 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 201
 202 #define CONFIG_SYS_BAUDRATE_TABLE       \
 203 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 204
 205 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 206 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 207 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 208 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 209
 210 /* I2C */
 211 #define CONFIG_SYS_I2C
 212 #define CONFIG_SYS_I2C_FSL
 213 #define CONFIG_I2C_MULTI_BUS
 214 #define CONFIG_I2C_CMD_TREE
 215 #define CONFIG_SYS_FSL_I2C_SPEED                400000  /* I2C speed and slave address */
 216 #define CONFIG_SYS_FSL_I2C_SLAVE                0x7F
 217 #define CONFIG_SYS_FSL_I2C_OFFSET               0x118000
 218 #define CONFIG_SYS_FSL_I2C2_SPEED               400000  /* I2C speed and slave address */
 219 #define CONFIG_SYS_FSL_I2C2_SLAVE               0x7F
 220 #define CONFIG_SYS_FSL_I2C2_OFFSET              0x118100
 221 #define CONFIG_SYS_FSL_I2C3_SPEED               400000  /* I2C speed and slave address */
 222 #define CONFIG_SYS_FSL_I2C3_SLAVE               0x7F
 223 #define CONFIG_SYS_FSL_I2C3_OFFSET              0x119000
 224 #define CONFIG_SYS_FSL_I2C4_SPEED               400000  /* I2C speed and slave address */
 225 #define CONFIG_SYS_FSL_I2C4_SLAVE               0x7F
 226 #define CONFIG_SYS_FSL_I2C4_OFFSET              0x119100
 227
 228 #define CONFIG_ID_EEPROM
 229 #define CONFIG_SYS_I2C_EEPROM_NXID
 230 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 231 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 232 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 233
 234 #define CONFIG_SYS_I2C_GENERIC_MAC
 235 #define CONFIG_SYS_I2C_MAC1_BUS 3
 236 #define CONFIG_SYS_I2C_MAC1_CHIP_ADDR 0x57
 237 #define CONFIG_SYS_I2C_MAC1_DATA_ADDR 0xf2
 238 #define CONFIG_SYS_I2C_MAC2_BUS 0
 239 #define CONFIG_SYS_I2C_MAC2_CHIP_ADDR 0x50
 240 #define CONFIG_SYS_I2C_MAC2_DATA_ADDR 0xfa
 241
 242 #define CONFIG_CMD_DATE                 1
 243 #define CONFIG_RTC_MCP79411             1
 244 #define CONFIG_SYS_RTC_BUS_NUM          3
 245 #define CONFIG_SYS_I2C_RTC_ADDR         0x6f
 246
 247 /*
 248  * eSPI - Enhanced SPI
 249  */
 250
 251 /*
 252  * General PCI
 253  * Memory space is mapped 1-1, but I/O space must start from 0.
 254  */
 255
 256 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 257 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 258 #ifdef CONFIG_PHYS_64BIT
 259 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 260 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 261 #else
 262 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 263 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 264 #endif
 265 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 266 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 267 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 268 #ifdef CONFIG_PHYS_64BIT
 269 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 270 #else
 271 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 272 #endif
 273 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 274
 275 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 276 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 277 #ifdef CONFIG_PHYS_64BIT
 278 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 279 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 280 #else
 281 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 282 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 283 #endif
 284 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 285 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 286 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 287 #ifdef CONFIG_PHYS_64BIT
 288 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 289 #else
 290 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 291 #endif
 292 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 293
 294 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 295 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 296 #ifdef CONFIG_PHYS_64BIT
 297 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 298 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 299 #else
 300 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 301 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 302 #endif
 303 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 304 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 305 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 306 #ifdef CONFIG_PHYS_64BIT
 307 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 308 #else
 309 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 310 #endif
 311 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 312
 313 /* controller 4, Base address 203000 */
 314 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 315 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 316 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x20000000      /* 512M */
 317 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 318 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 319 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 320
 321 /* Qman/Bman */
 322 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 323 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 324 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 325 #ifdef CONFIG_PHYS_64BIT
 326 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 327 #else
 328 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 329 #endif
 330 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 331 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 332 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 333 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 334 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 335 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 336                                          CONFIG_SYS_BMAN_CENA_SIZE)
 337 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 338 #define CONFIG_SYS_BMAN_SWP_ISDR_REG   0xE08
 339 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 340 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 341 #ifdef CONFIG_PHYS_64BIT
 342 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 343 #else
 344 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 345 #endif
 346 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 347 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 348 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 349 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 350 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 351 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 352                                           CONFIG_SYS_QMAN_CENA_SIZE)
 353 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 354 #define CONFIG_SYS_QMAN_SWP_ISDR_REG   0xE08
 355
 356 #define CONFIG_SYS_DPAA_FMAN
 357 /* Default address of microcode for the Linux Fman driver */
 358 /*
 359  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 360  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 361  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 362  */
 363 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 364 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 365
 366 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 367 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 368
 369 #ifdef CONFIG_SYS_DPAA_FMAN
 370 #define CONFIG_FMAN_ENET
 371 #define CONFIG_PHY_MICREL
 372 #define CONFIG_PHY_MICREL_KSZ9021
 373 #endif
 374
 375 #ifdef CONFIG_PCI
 376 #define CONFIG_PCI_INDIRECT_BRIDGE
 377 #define CONFIG_NET_MULTI
 378
 379 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 380 #endif  /* CONFIG_PCI */
 381
 382 /* SATA */
 383 #ifdef CONFIG_FSL_SATA_V2
 384 #define CONFIG_LIBATA
 385 #define CONFIG_FSL_SATA
 386
 387 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 388 #define CONFIG_SATA1
 389 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 390 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 391 #define CONFIG_SATA2
 392 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 393 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 394
 395 #define CONFIG_LBA48
 396 #define CONFIG_CMD_SATA
 397 #endif
 398
 399 #ifdef CONFIG_FMAN_ENET
 400 #define CONFIG_SYS_TBIPA_VALUE  8
 401 #define CONFIG_MII              /* MII PHY management */
 402 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 403 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 404 #endif
 405
 406 /*
 407  * Environment
 408  */
 409 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 410 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 411
 412 /*
 413  * Command line configuration.
 414  */
 415 #define CONFIG_CMD_ERRATA
 416 #define CONFIG_CMD_IRQ
 417 #define CONFIG_CMD_REGINFO
 418
 419 #ifdef CONFIG_PCI
 420 #define CONFIG_CMD_PCI
 421 #endif
 422
 423 /*
 424  * USB
 425  */
 426 #define CONFIG_HAS_FSL_DR_USB
 427 #define CONFIG_HAS_FSL_MPH_USB
 428
 429 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 430 #define CONFIG_USB_EHCI
 431 #define CONFIG_USB_EHCI_FSL
 432 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 433 #define CONFIG_EHCI_IS_TDI
 434 #define CONFIG_SYS_USB_EVENT_POLL
 435  /* _VIA_CONTROL_EP  */
 436 #endif
 437
 438 #ifdef CONFIG_MMC
 439 #define CONFIG_FSL_ESDHC
 440 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 441 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 442 #endif
 443
 444 /*
 445  * Miscellaneous configurable options
 446  */
 447 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 448 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 449 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 450 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 451 #ifdef CONFIG_CMD_KGDB
 452 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 453 #else
 454 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 455 #endif
 456 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 457 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 458 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 459
 460 /*
 461  * For booting Linux, the board info and command line data
 462  * have to be in the first 64 MB of memory, since this is
 463  * the maximum mapped by the Linux kernel during initialization.
 464  */
 465 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 466 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 467
 468 #ifdef CONFIG_CMD_KGDB
 469 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 470 #endif
 471
 472 /*
 473  * Environment Configuration
 474  */
 475 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 476 #define CONFIG_BOOTFILE         "uImage"
 477 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 478
 479 /* default location for tftp and bootm */
 480 #define CONFIG_LOADADDR         1000000
 481
 482
 483 #define CONFIG_BAUDRATE 115200
 484
 485 #define __USB_PHY_TYPE  utmi
 486
 487 #define CONFIG_EXTRA_ENV_SETTINGS \
 488 "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 489 "bank_intlv=cs0_cs1;"                                   \
 490 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 491 "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 492 "netdev=eth0\0"                                         \
 493 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 494 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"                     \
 495 "consoledev=ttyS0\0"                                    \
 496 "ramdiskaddr=2000000\0"                                 \
 497 "fdtaddr=1e00000\0"                                     \
 498 "bdev=sda3\0"
 499
 500 #define CONFIG_HDBOOT                                   \
 501 "setenv bootargs root=/dev/$bdev rw "           \
 502 "console=$consoledev,$baudrate $othbootargs;"   \
 503 "tftp $loadaddr $bootfile;"                     \
 504 "tftp $fdtaddr $fdtfile;"                       \
 505 "bootm $loadaddr - $fdtaddr"
 506
 507 #define CONFIG_NFSBOOTCOMMAND                   \
 508 "setenv bootargs root=/dev/nfs rw "     \
 509 "nfsroot=$serverip:$rootpath "          \
 510 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 511 "console=$consoledev,$baudrate $othbootargs;"   \
 512 "tftp $loadaddr $bootfile;"             \
 513 "tftp $fdtaddr $fdtfile;"               \
 514 "bootm $loadaddr - $fdtaddr"
 515
 516 #define CONFIG_RAMBOOTCOMMAND                           \
 517 "setenv bootargs root=/dev/ram rw "             \
 518 "console=$consoledev,$baudrate $othbootargs;"   \
 519 "tftp $ramdiskaddr $ramdiskfile;"               \
 520 "tftp $loadaddr $bootfile;"                     \
 521 "tftp $fdtaddr $fdtfile;"                       \
 522 "bootm $loadaddr $ramdiskaddr $fdtaddr"
 523
 524 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 525
 526 #include <asm/fsl_secure_boot.h>
 527
 528 #ifdef CONFIG_SECURE_BOOT
 529 #endif
 530
 531 #endif  /* __CONFIG_H */