include/configs/da850evm.h

   1 /*
   2  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * Based on davinci_dvevm.h. Original Copyrights follow:
   5  *
   6  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21  */
  22
  23 #ifndef __CONFIG_H
  24 #define __CONFIG_H
  25
  26 /*
  27  * Board
  28  */
  29 #define CONFIG_DRIVER_TI_EMAC
  30 #define CONFIG_USE_SPIFLASH
  31
  32
  33 /*
  34  * SoC Configuration
  35  */
  36 #define CONFIG_MACH_DAVINCI_DA850_EVM
  37 #define CONFIG_ARM926EJS                /* arm926ejs CPU core */
  38 #define CONFIG_SOC_DA8XX                /* TI DA8xx SoC */
  39 #define CONFIG_SOC_DA850                /* TI DA850 SoC */
  40 #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
  41 #define CONFIG_SYS_CLK_FREQ             clk_get(DAVINCI_ARM_CLKID)
  42 #define CONFIG_SYS_OSCIN_FREQ           24000000
  43 #define CONFIG_SYS_TIMERBASE            DAVINCI_TIMER0_BASE
  44 #define CONFIG_SYS_HZ_CLOCK             clk_get(DAVINCI_AUXCLK_CLKID)
  45 #define CONFIG_SYS_HZ                   1000
  46 #define CONFIG_SYS_TEXT_BASE            0xc1080000
  47 #define CONFIG_SYS_DA850_PLL_INIT
  48 #define CONFIG_SYS_DA850_DDR_INIT
  49
  50 /*
  51  * Memory Info
  52  */
  53 #define CONFIG_SYS_MALLOC_LEN   (0x10000 + 1*1024*1024) /* malloc() len */
  54 #define PHYS_SDRAM_1            DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
  55 #define PHYS_SDRAM_1_SIZE       (64 << 20) /* SDRAM size 64MB */
  56 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
  57
  58 /* memtest start addr */
  59 #define CONFIG_SYS_MEMTEST_START        (PHYS_SDRAM_1 + 0x2000000)
  60
  61 /* memtest will be run on 16MB */
  62 #define CONFIG_SYS_MEMTEST_END  (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
  63
  64 #define CONFIG_NR_DRAM_BANKS    1 /* we have 1 bank of DRAM */
  65 #define CONFIG_STACKSIZE        (256*1024) /* regular stack */
  66
  67 #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC (       \
  68         DAVINCI_SYSCFG_SUSPSRC_TIMER0 |         \
  69         DAVINCI_SYSCFG_SUSPSRC_SPI1 |           \
  70         DAVINCI_SYSCFG_SUSPSRC_UART2 |          \
  71         DAVINCI_SYSCFG_SUSPSRC_EMAC |           \
  72         DAVINCI_SYSCFG_SUSPSRC_I2C)
  73
  74 /*
  75  * PLL configuration
  76  */
  77 #define CONFIG_SYS_DV_CLKMODE          0
  78 #define CONFIG_SYS_DA850_PLL0_POSTDIV  1
  79 #define CONFIG_SYS_DA850_PLL0_PLLDIV1  0x8000
  80 #define CONFIG_SYS_DA850_PLL0_PLLDIV2  0x8001
  81 #define CONFIG_SYS_DA850_PLL0_PLLDIV3  0x8002
  82 #define CONFIG_SYS_DA850_PLL0_PLLDIV4  0x8003
  83 #define CONFIG_SYS_DA850_PLL0_PLLDIV5  0x8002
  84 #define CONFIG_SYS_DA850_PLL0_PLLDIV6  CONFIG_SYS_DA850_PLL0_PLLDIV1
  85 #define CONFIG_SYS_DA850_PLL0_PLLDIV7  0x8005
  86
  87 #define CONFIG_SYS_DA850_PLL1_POSTDIV  1
  88 #define CONFIG_SYS_DA850_PLL1_PLLDIV1  0x8000
  89 #define CONFIG_SYS_DA850_PLL1_PLLDIV2  0x8001
  90 #define CONFIG_SYS_DA850_PLL1_PLLDIV3  0x8002
  91
  92 #define CONFIG_SYS_DA850_PLL0_PLLM     24
  93 #define CONFIG_SYS_DA850_PLL1_PLLM     21
  94
  95 /*
  96  * DDR2 memory configuration
  97  */
  98 #define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \
  99                                         DV_DDR_PHY_EXT_STRBEN | \
 100                                         (0x4 << DV_DDR_PHY_RD_LATENCY_SHIFT))
 101
 102 #define CONFIG_SYS_DA850_DDR2_SDBCR (           \
 103         (1 << DV_DDR_SDCR_MSDRAMEN_SHIFT) |     \
 104         (1 << DV_DDR_SDCR_DDREN_SHIFT) |        \
 105         (1 << DV_DDR_SDCR_SDRAMEN_SHIFT) |      \
 106         (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) |    \
 107         (0x3 << DV_DDR_SDCR_CL_SHIFT) |         \
 108         (0x2 << DV_DDR_SDCR_IBANK_SHIFT) |      \
 109         (0x2 << DV_DDR_SDCR_PAGESIZE_SHIFT))
 110
 111 /* SDBCR2 is only used if IBANK_POS bit in SDBCR is set */
 112 #define CONFIG_SYS_DA850_DDR2_SDBCR2 0
 113
 114 #define CONFIG_SYS_DA850_DDR2_SDTIMR (          \
 115         (14 << DV_DDR_SDTMR1_RFC_SHIFT) |       \
 116         (2 << DV_DDR_SDTMR1_RP_SHIFT) |         \
 117         (2 << DV_DDR_SDTMR1_RCD_SHIFT) |        \
 118         (1 << DV_DDR_SDTMR1_WR_SHIFT) |         \
 119         (5 << DV_DDR_SDTMR1_RAS_SHIFT) |        \
 120         (8 << DV_DDR_SDTMR1_RC_SHIFT) |         \
 121         (1 << DV_DDR_SDTMR1_RRD_SHIFT) |        \
 122         (0 << DV_DDR_SDTMR1_WTR_SHIFT))
 123
 124 #define CONFIG_SYS_DA850_DDR2_SDTIMR2 (         \
 125         (7 << DV_DDR_SDTMR2_RASMAX_SHIFT) |     \
 126         (0 << DV_DDR_SDTMR2_XP_SHIFT) |         \
 127         (0 << DV_DDR_SDTMR2_ODT_SHIFT) |        \
 128         (17 << DV_DDR_SDTMR2_XSNR_SHIFT) |      \
 129         (199 << DV_DDR_SDTMR2_XSRD_SHIFT) |     \
 130         (0 << DV_DDR_SDTMR2_RTP_SHIFT) |        \
 131         (0 << DV_DDR_SDTMR2_CKE_SHIFT))
 132
 133 #define CONFIG_SYS_DA850_DDR2_SDRCR    0x00000494
 134 #define CONFIG_SYS_DA850_DDR2_PBBPR    0x30
 135
 136 /*
 137  * Serial Driver info
 138  */
 139 #define CONFIG_SYS_NS16550
 140 #define CONFIG_SYS_NS16550_SERIAL
 141 #define CONFIG_SYS_NS16550_REG_SIZE     -4      /* NS16550 register size */
 142 #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */
 143 #define CONFIG_SYS_NS16550_CLK  clk_get(DAVINCI_UART2_CLKID)
 144 #define CONFIG_CONS_INDEX       1               /* use UART0 for console */
 145 #define CONFIG_BAUDRATE         115200          /* Default baud rate */
 146
 147 #define CONFIG_SPI
 148 #define CONFIG_SPI_FLASH
 149 #define CONFIG_SPI_FLASH_STMICRO
 150 #define CONFIG_SPI_FLASH_WINBOND
 151 #define CONFIG_DAVINCI_SPI
 152 #define CONFIG_SYS_SPI_BASE             DAVINCI_SPI1_BASE
 153 #define CONFIG_SYS_SPI_CLK              clk_get(DAVINCI_SPI1_CLKID)
 154 #define CONFIG_SF_DEFAULT_SPEED         30000000
 155 #define CONFIG_ENV_SPI_MAX_HZ   CONFIG_SF_DEFAULT_SPEED
 156
 157 /*
 158  * I2C Configuration
 159  */
 160 #define CONFIG_HARD_I2C
 161 #define CONFIG_DRIVER_DAVINCI_I2C
 162 #define CONFIG_SYS_I2C_SPEED            25000
 163 #define CONFIG_SYS_I2C_SLAVE            10 /* Bogus, master-only in U-Boot */
 164 #define CONFIG_SYS_I2C_EXPANDER_ADDR   0x20
 165
 166 /*
 167  * Flash & Environment
 168  */
 169 #ifdef CONFIG_USE_NAND
 170 #undef CONFIG_ENV_IS_IN_FLASH
 171 #define CONFIG_NAND_DAVINCI
 172 #define CONFIG_SYS_NO_FLASH
 173 #define CONFIG_ENV_IS_IN_NAND           /* U-Boot env in NAND Flash  */
 174 #define CONFIG_ENV_OFFSET               0x0 /* Block 0--not used by bootcode */
 175 #define CONFIG_ENV_SIZE                 (128 << 10)
 176 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 177 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 178 #define CONFIG_SYS_NAND_PAGE_2K
 179 #define CONFIG_SYS_NAND_CS              3
 180 #define CONFIG_SYS_NAND_BASE            DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
 181 #define CONFIG_SYS_CLE_MASK             0x10
 182 #define CONFIG_SYS_ALE_MASK             0x8
 183 #undef CONFIG_SYS_NAND_HW_ECC
 184 #define CONFIG_SYS_MAX_NAND_DEVICE      1 /* Max number of NAND devices */
 185 #endif
 186
 187 /*
 188  * Network & Ethernet Configuration
 189  */
 190 #ifdef CONFIG_DRIVER_TI_EMAC
 191 #define CONFIG_MII
 192 #define CONFIG_BOOTP_DEFAULT
 193 #define CONFIG_BOOTP_DNS
 194 #define CONFIG_BOOTP_DNS2
 195 #define CONFIG_BOOTP_SEND_HOSTNAME
 196 #define CONFIG_NET_RETRY_COUNT  10
 197 #endif
 198
 199 #ifdef CONFIG_USE_NOR
 200 #define CONFIG_ENV_IS_IN_FLASH
 201 #define CONFIG_FLASH_CFI_DRIVER
 202 #define CONFIG_SYS_FLASH_CFI
 203 #define CONFIG_SYS_FLASH_PROTECTION
 204 #define CONFIG_SYS_MAX_FLASH_BANKS      1 /* max number of flash banks */
 205 #define CONFIG_SYS_FLASH_SECT_SZ        (128 << 10) /* 128KB */
 206 #define CONFIG_ENV_OFFSET               (CONFIG_SYS_FLASH_SECT_SZ * 3)
 207 #define CONFIG_ENV_SIZE                 (10 << 10) /* 10KB */
 208 #define CONFIG_SYS_FLASH_BASE           DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
 209 #define PHYS_FLASH_SIZE                 (8 << 20) /* Flash size 8MB */
 210 #define CONFIG_SYS_MAX_FLASH_SECT ((PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)\
 211                + 3)
 212 #define CONFIG_ENV_SECT_SIZE            CONFIG_SYS_FLASH_SECT_SZ
 213 #endif
 214
 215 #ifdef CONFIG_USE_SPIFLASH
 216 #undef CONFIG_ENV_IS_IN_FLASH
 217 #undef CONFIG_ENV_IS_IN_NAND
 218 #define CONFIG_ENV_IS_IN_SPI_FLASH
 219 #define CONFIG_ENV_SIZE                 (64 << 10)
 220 #define CONFIG_ENV_OFFSET               (256 << 10)
 221 #define CONFIG_ENV_SECT_SIZE            (64 << 10)
 222 #define CONFIG_SYS_NO_FLASH
 223 #endif
 224
 225 /*
 226  * U-Boot general configuration
 227  */
 228 #define CONFIG_MISC_INIT_R
 229 #define CONFIG_BOARD_EARLY_INIT_F
 230 #define CONFIG_BOOTFILE         "uImage" /* Boot file name */
 231 #define CONFIG_SYS_PROMPT       "U-Boot > " /* Command Prompt */
 232 #define CONFIG_SYS_CBSIZE       1024 /* Console I/O Buffer Size */
 233 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 234 #define CONFIG_SYS_MAXARGS      16 /* max number of command args */
 235 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 236 #define CONFIG_SYS_LOAD_ADDR    (PHYS_SDRAM_1 + 0x700000)
 237 #define CONFIG_VERSION_VARIABLE
 238 #define CONFIG_AUTO_COMPLETE
 239 #define CONFIG_SYS_HUSH_PARSER
 240 #define CONFIG_CMDLINE_EDITING
 241 #define CONFIG_SYS_LONGHELP
 242 #define CONFIG_CRC32_VERIFY
 243 #define CONFIG_MX_CYCLIC
 244
 245 /*
 246  * Linux Information
 247  */
 248 #define LINUX_BOOT_PARAM_ADDR   (PHYS_SDRAM_1 + 0x100)
 249 #define CONFIG_HWCONFIG         /* enable hwconfig */
 250 #define CONFIG_CMDLINE_TAG
 251 #define CONFIG_REVISION_TAG
 252 #define CONFIG_SETUP_MEMORY_TAGS
 253 #define CONFIG_BOOTARGS         \
 254         "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp"
 255 #define CONFIG_BOOTDELAY        3
 256 #define CONFIG_EXTRA_ENV_SETTINGS       "hwconfig=dsp:wake=yes"
 257
 258 /*
 259  * U-Boot commands
 260  */
 261 #include <config_cmd_default.h>
 262 #define CONFIG_CMD_ENV
 263 #define CONFIG_CMD_ASKENV
 264 #define CONFIG_CMD_DHCP
 265 #define CONFIG_CMD_DIAG
 266 #define CONFIG_CMD_MII
 267 #define CONFIG_CMD_PING
 268 #define CONFIG_CMD_SAVES
 269 #define CONFIG_CMD_MEMORY
 270
 271 #ifdef CONFIG_CMD_BDI
 272 #define CONFIG_CLOCKS
 273 #endif
 274
 275 #ifndef CONFIG_DRIVER_TI_EMAC
 276 #undef CONFIG_CMD_NET
 277 #undef CONFIG_CMD_DHCP
 278 #undef CONFIG_CMD_MII
 279 #undef CONFIG_CMD_PING
 280 #endif
 281
 282 #ifdef CONFIG_USE_NAND
 283 #undef CONFIG_CMD_FLASH
 284 #undef CONFIG_CMD_IMLS
 285 #define CONFIG_CMD_NAND
 286
 287 #define CONFIG_CMD_MTDPARTS
 288 #define CONFIG_MTD_DEVICE
 289 #define CONFIG_MTD_PARTITIONS
 290 #define CONFIG_LZO
 291 #define CONFIG_RBTREE
 292 #define CONFIG_CMD_UBI
 293 #define CONFIG_CMD_UBIFS
 294 #endif
 295
 296 #ifdef CONFIG_USE_SPIFLASH
 297 #undef CONFIG_CMD_IMLS
 298 #undef CONFIG_CMD_FLASH
 299 #define CONFIG_CMD_SPI
 300 #define CONFIG_CMD_SF
 301 #define CONFIG_CMD_SAVEENV
 302 #endif
 303
 304 #if !defined(CONFIG_USE_NAND) && \
 305         !defined(CONFIG_USE_NOR) && \
 306         !defined(CONFIG_USE_SPIFLASH)
 307 #define CONFIG_ENV_IS_NOWHERE
 308 #define CONFIG_SYS_NO_FLASH
 309 #define CONFIG_ENV_SIZE         (16 << 10)
 310 #undef CONFIG_CMD_IMLS
 311 #undef CONFIG_CMD_ENV
 312 #endif
 313
 314 /* SD/MMC configuration */
 315 #ifndef CONFIG_USE_NOR
 316 #define CONFIG_MMC
 317 #define CONFIG_DAVINCI_MMC_SD1
 318 #define CONFIG_GENERIC_MMC
 319 #define CONFIG_DAVINCI_MMC
 320 #endif
 321
 322 /*
 323  * Enable MMC commands only when
 324  * MMC support is present
 325  */
 326 #ifdef CONFIG_MMC
 327 #define CONFIG_DOS_PARTITION
 328 #define CONFIG_CMD_EXT2
 329 #define CONFIG_CMD_FAT
 330 #define CONFIG_CMD_MMC
 331 #endif
 332
 333 /* defines for SPL */
 334 #define CONFIG_SPL
 335 #define CONFIG_SPL_SPI_SUPPORT
 336 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 337 #define CONFIG_SPL_SPI_LOAD
 338 #define CONFIG_SPL_SPI_BUS 0
 339 #define CONFIG_SPL_SPI_CS 0
 340 #define CONFIG_SPL_SERIAL_SUPPORT
 341 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 342 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 343 #define CONFIG_SPL_LDSCRIPT     "board/$(BOARDDIR)/u-boot-spl-da850evm.lds"
 344 #define CONFIG_SPL_STACK        0x8001ff00
 345 #define CONFIG_SPL_TEXT_BASE    0x80000000
 346 #define CONFIG_SPL_MAX_SIZE     32768
 347 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x8000
 348 #define CONFIG_SYS_SPI_U_BOOT_SIZE      0x30000
 349
 350 /* additions for new relocation code, must added to all boards */
 351 #define CONFIG_SYS_SDRAM_BASE           0xc0000000
 352 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
 353                                         GENERATED_GBL_DATA_SIZE)
 354 #endif /* __CONFIG_H */