include/configs/db-88f6720.h

   1 /*
   2  * Copyright (C) 2016 Stefan Roese <sr@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef _CONFIG_DB_88F6720_H
   8 #define _CONFIG_DB_88F6720_H
   9
  10 /*
  11  * High Level Configuration Options (easy to change)
  12  */
  13 #define CONFIG_DISPLAY_BOARDINFO_LATE
  14
  15 /*
  16  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  17  * for DDR ECC byte filling in the SPL before loading the main
  18  * U-Boot into it.
  19  */
  20 #define CONFIG_SYS_TEXT_BASE    0x00800000
  21 #define CONFIG_SYS_TCLK         200000000       /* 200MHz */
  22
  23 /*
  24  * Commands configuration
  25  */
  26 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  27 #define CONFIG_CMD_ENV
  28
  29 /* I2C */
  30 #define CONFIG_SYS_I2C
  31 #define CONFIG_SYS_I2C_MVTWSI
  32 #define CONFIG_I2C_MVTWSI_BASE0         MVEBU_TWSI_BASE
  33 #define CONFIG_SYS_I2C_SLAVE            0x0
  34 #define CONFIG_SYS_I2C_SPEED            100000
  35
  36 /* USB/EHCI configuration */
  37 #define CONFIG_EHCI_IS_TDI
  38 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
  39
  40 /* SPI NOR flash default params, used by sf commands */
  41 #define CONFIG_SF_DEFAULT_SPEED         1000000
  42 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_3
  43
  44 /* Environment in SPI NOR flash */
  45 #define CONFIG_ENV_IS_IN_SPI_FLASH
  46 #define CONFIG_ENV_OFFSET               (1 << 20) /* 1MiB in */
  47 #define CONFIG_ENV_SIZE                 (64 << 10) /* 64KiB */
  48 #define CONFIG_ENV_SECT_SIZE            (64 << 10) /* 64KiB sectors */
  49
  50 #define CONFIG_PHY_MARVELL              /* there is a marvell phy */
  51 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer aneg time */
  52
  53 #define CONFIG_SYS_CONSOLE_INFO_QUIET   /* don't print console @ startup */
  54 #define CONFIG_SYS_ALT_MEMTEST
  55
  56 /* Additional FS support/configuration */
  57 #define CONFIG_SUPPORT_VFAT
  58
  59 /*
  60  * mv-common.h should be defined after CMD configs since it used them
  61  * to enable certain macros
  62  */
  63 #include "mv-common.h"
  64
  65 /*
  66  * Memory layout while starting into the bin_hdr via the
  67  * BootROM:
  68  *
  69  * 0x4000.4000 - 0x4003.4000    headers space (192KiB)
  70  * 0x4000.4030                  bin_hdr start address
  71  * 0x4003.4000 - 0x4004.7c00    BootROM memory allocations (15KiB)
  72  * 0x4007.fffc                  BootROM stack top
  73  *
  74  * The address space between 0x4007.fffc and 0x400f.fff is not locked in
  75  * L2 cache thus cannot be used.
  76  */
  77
  78 /* SPL */
  79 /* Defines for SPL */
  80 #define CONFIG_SPL_FRAMEWORK
  81 #define CONFIG_SPL_TEXT_BASE            0x40004030
  82 #define CONFIG_SPL_MAX_SIZE             ((128 << 10) - 0x4030)
  83
  84 #define CONFIG_SPL_BSS_START_ADDR       (0x40000000 + (128 << 10))
  85 #define CONFIG_SPL_BSS_MAX_SIZE         (16 << 10)
  86
  87 #ifdef CONFIG_SPL_BUILD
  88 #define CONFIG_SYS_MALLOC_SIMPLE
  89 #endif
  90
  91 #define CONFIG_SPL_STACK                (0x40000000 + ((192 - 16) << 10))
  92 #define CONFIG_SPL_BOOTROM_SAVE         (CONFIG_SPL_STACK + 4)
  93
  94 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  95 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  96 #define CONFIG_SPL_SERIAL_SUPPORT
  97
  98 /* SPL related SPI defines */
  99 #define CONFIG_SPL_SPI_SUPPORT
 100 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 101 #define CONFIG_SPL_SPI_LOAD
 102 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x20000
 103 #define CONFIG_SYS_U_BOOT_OFFS          CONFIG_SYS_SPI_U_BOOT_OFFS
 104
 105 #endif /* _CONFIG_DB_88F6720_H */