include/configs/db-88f6820-gp.h

   1 /*
   2  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef _CONFIG_DB_88F6820_GP_H
   8 #define _CONFIG_DB_88F6820_GP_H
   9
  10 /*
  11  * High Level Configuration Options (easy to change)
  12  */
  13 #define CONFIG_ARMADA_XP                /* SOC Family Name */
  14 #define CONFIG_DB_88F6820_GP            /* Board target name for DDR training */
  15
  16 #define CONFIG_SYS_L2_PL310
  17
  18 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  19 #define CONFIG_SYS_GENERIC_BOARD
  20 #define CONFIG_DISPLAY_BOARDINFO_LATE
  21
  22 #define CONFIG_SYS_TEXT_BASE    0x04000000
  23 #define CONFIG_SYS_TCLK         250000000       /* 250MHz */
  24
  25 /*
  26  * Commands configuration
  27  */
  28 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  29 #define CONFIG_CMD_CACHE
  30 #define CONFIG_CMD_DHCP
  31 #define CONFIG_CMD_ENV
  32 #define CONFIG_CMD_I2C
  33 #define CONFIG_CMD_PING
  34 #define CONFIG_CMD_SF
  35 #define CONFIG_CMD_SPI
  36 #define CONFIG_CMD_TFTPPUT
  37 #define CONFIG_CMD_TIME
  38
  39 /* I2C */
  40 #define CONFIG_SYS_I2C
  41 #define CONFIG_SYS_I2C_MVTWSI
  42 #define CONFIG_I2C_MVTWSI_BASE0         MVEBU_TWSI_BASE
  43 #define CONFIG_SYS_I2C_SLAVE            0x0
  44 #define CONFIG_SYS_I2C_SPEED            100000
  45
  46 /* SPI NOR flash default params, used by sf commands */
  47 #define CONFIG_SF_DEFAULT_SPEED         1000000
  48 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_3
  49 #define CONFIG_SPI_FLASH_STMICRO
  50
  51 /* Environment in SPI NOR flash */
  52 #define CONFIG_ENV_IS_IN_SPI_FLASH
  53 #define CONFIG_ENV_OFFSET               (1 << 20) /* 1MiB in */
  54 #define CONFIG_ENV_SIZE                 (64 << 10) /* 64KiB */
  55 #define CONFIG_ENV_SECT_SIZE            (256 << 10) /* 256KiB sectors */
  56
  57 #define CONFIG_PHY_MARVELL              /* there is a marvell phy */
  58 #define CONFIG_PHY_ADDR                 { 1, 0 }
  59 #define CONFIG_SYS_NETA_INTERFACE_TYPE  PHY_INTERFACE_MODE_RGMII
  60 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer aneg time */
  61
  62 #define CONFIG_SYS_CONSOLE_INFO_QUIET   /* don't print console @ startup */
  63 #define CONFIG_SYS_ALT_MEMTEST
  64
  65 /* Keep device tree and initrd in lower memory so the kernel can access them */
  66 #define CONFIG_EXTRA_ENV_SETTINGS       \
  67         "fdt_high=0x10000000\0"         \
  68         "initrd_high=0x10000000\0"
  69
  70 /*
  71  * mv-common.h should be defined after CMD configs since it used them
  72  * to enable certain macros
  73  */
  74 #include "mv-common.h"
  75
  76 #endif /* _CONFIG_DB_88F6820_GP_H */