include/configs/db-mv784mp-gp.h

   1 /*
   2  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef _CONFIG_DB_MV7846MP_GP_H
   8 #define _CONFIG_DB_MV7846MP_GP_H
   9
  10 /*
  11  * High Level Configuration Options (easy to change)
  12  */
  13 #define CONFIG_ARMADA_XP                /* SOC Family Name */
  14 #define CONFIG_DB_784MP_GP              /* Board target name for DDR training */
  15
  16 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  17 #define CONFIG_SYS_GENERIC_BOARD
  18 #define CONFIG_DISPLAY_BOARDINFO_LATE
  19
  20 #define CONFIG_SYS_TEXT_BASE    0x04000000
  21 #define CONFIG_SYS_TCLK         250000000       /* 250MHz */
  22
  23 /*
  24  * Commands configuration
  25  */
  26 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  27 #define CONFIG_CMD_DHCP
  28 #define CONFIG_CMD_ENV
  29 #define CONFIG_CMD_I2C
  30 #define CONFIG_CMD_PING
  31 #define CONFIG_CMD_SF
  32 #define CONFIG_CMD_SPI
  33 #define CONFIG_CMD_TFTPPUT
  34 #define CONFIG_CMD_TIME
  35
  36 /* I2C */
  37 #define CONFIG_SYS_I2C
  38 #define CONFIG_SYS_I2C_MVTWSI
  39 #define CONFIG_I2C_MVTWSI_BASE0         MVEBU_TWSI_BASE
  40 #define CONFIG_SYS_I2C_SLAVE            0x0
  41 #define CONFIG_SYS_I2C_SPEED            100000
  42
  43 /* SPI NOR flash default params, used by sf commands */
  44 #define CONFIG_SF_DEFAULT_SPEED         1000000
  45 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_3
  46 #define CONFIG_SPI_FLASH_STMICRO
  47
  48 /* Environment in SPI NOR flash */
  49 #define CONFIG_ENV_IS_IN_SPI_FLASH
  50 #define CONFIG_ENV_OFFSET               (1 << 20) /* 1MiB in */
  51 #define CONFIG_ENV_SIZE                 (64 << 10) /* 64KiB */
  52 #define CONFIG_ENV_SECT_SIZE            (64 << 10) /* 64KiB sectors */
  53
  54 #define CONFIG_PHY_MARVELL              /* there is a marvell phy */
  55 #define CONFIG_PHY_ADDR                 { 0x10, 0x11, 0x12, 0x13 }
  56 #define CONFIG_SYS_NETA_INTERFACE_TYPE  PHY_INTERFACE_MODE_QSGMII
  57 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer aneg time */
  58 #define CONFIG_RESET_PHY_R
  59
  60 #define CONFIG_SYS_CONSOLE_INFO_QUIET   /* don't print console @ startup */
  61 #define CONFIG_SYS_ALT_MEMTEST
  62
  63 /*
  64  * mv-common.h should be defined after CMD configs since it used them
  65  * to enable certain macros
  66  */
  67 #include "mv-common.h"
  68
  69 /*
  70  * Memory layout while starting into the bin_hdr via the
  71  * BootROM:
  72  *
  73  * 0x4000.4000 - 0x4003.4000    headers space (192KiB)
  74  * 0x4000.4030                  bin_hdr start address
  75  * 0x4003.4000 - 0x4004.7c00    BootROM memory allocations (15KiB)
  76  * 0x4007.fffc                  BootROM stack top
  77  *
  78  * The address space between 0x4007.fffc and 0x400f.fff is not locked in
  79  * L2 cache thus cannot be used.
  80  */
  81
  82 /* SPL */
  83 /* Defines for SPL */
  84 #define CONFIG_SPL_FRAMEWORK
  85 #define CONFIG_SPL_TEXT_BASE            0x40004030
  86 #define CONFIG_SPL_MAX_SIZE             ((128 << 10) - 0x4030)
  87
  88 #define CONFIG_SPL_BSS_START_ADDR       (0x40000000 + (128 << 10))
  89 #define CONFIG_SPL_BSS_MAX_SIZE         (16 << 10)
  90
  91 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
  92                                          CONFIG_SPL_BSS_MAX_SIZE)
  93 #define CONFIG_SYS_SPL_MALLOC_SIZE      (16 << 10)
  94
  95 #define CONFIG_SPL_STACK                (0x40000000 + ((192 - 16) << 10))
  96 #define CONFIG_SPL_BOOTROM_SAVE         (CONFIG_SPL_STACK + 4)
  97
  98 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  99 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 100 #define CONFIG_SPL_SERIAL_SUPPORT
 101 #define CONFIG_SPL_I2C_SUPPORT
 102
 103 /* SPL related SPI defines */
 104 #define CONFIG_SPL_SPI_SUPPORT
 105 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 106 #define CONFIG_SPL_SPI_LOAD
 107 #define CONFIG_SPL_SPI_BUS              0
 108 #define CONFIG_SPL_SPI_CS               0
 109 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x20000
 110
 111 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
 112 #define CONFIG_SYS_MVEBU_DDR
 113 #define CONFIG_SPD_EEPROM               0x4e
 114
 115 #endif /* _CONFIG_DB_MV7846MP_GP_H */