include/configs/db-mv784mp-gp.h

   1 /*
   2  * Copyright (C) 2014-2015 Stefan Roese <sr@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef _CONFIG_DB_MV7846MP_GP_H
   8 #define _CONFIG_DB_MV7846MP_GP_H
   9
  10 /*
  11  * High Level Configuration Options (easy to change)
  12  */
  13 #define CONFIG_DB_784MP_GP              /* Board target name for DDR training */
  14
  15 #define CONFIG_DISPLAY_BOARDINFO_LATE
  16
  17 /*
  18  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  19  * for DDR ECC byte filling in the SPL before loading the main
  20  * U-Boot into it.
  21  */
  22 #define CONFIG_SYS_TEXT_BASE    0x00800000
  23 #define CONFIG_SYS_TCLK         250000000       /* 250MHz */
  24
  25 /*
  26  * Commands configuration
  27  */
  28 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  29 #define CONFIG_CMD_CACHE
  30 #define CONFIG_CMD_DHCP
  31 #define CONFIG_CMD_ENV
  32 #define CONFIG_CMD_EXT2
  33 #define CONFIG_CMD_EXT4
  34 #define CONFIG_CMD_FAT
  35 #define CONFIG_CMD_FS_GENERIC
  36 #define CONFIG_CMD_I2C
  37 #define CONFIG_CMD_NAND
  38 #define CONFIG_CMD_PCI
  39 #define CONFIG_CMD_PING
  40 #define CONFIG_CMD_SATA
  41 #define CONFIG_CMD_SF
  42 #define CONFIG_CMD_SPI
  43 #define CONFIG_CMD_TFTPPUT
  44 #define CONFIG_CMD_TIME
  45
  46 /* I2C */
  47 #define CONFIG_SYS_I2C
  48 #define CONFIG_SYS_I2C_MVTWSI
  49 #define CONFIG_I2C_MVTWSI_BASE0         MVEBU_TWSI_BASE
  50 #define CONFIG_SYS_I2C_SLAVE            0x0
  51 #define CONFIG_SYS_I2C_SPEED            100000
  52
  53 /* USB/EHCI configuration */
  54 #define CONFIG_EHCI_IS_TDI
  55 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
  56
  57 /* SPI NOR flash default params, used by sf commands */
  58 #define CONFIG_SF_DEFAULT_SPEED         1000000
  59 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_3
  60
  61 /* Environment in SPI NOR flash */
  62 #define CONFIG_ENV_IS_IN_SPI_FLASH
  63 #define CONFIG_ENV_OFFSET               (1 << 20) /* 1MiB in */
  64 #define CONFIG_ENV_SIZE                 (64 << 10) /* 64KiB */
  65 #define CONFIG_ENV_SECT_SIZE            (64 << 10) /* 64KiB sectors */
  66
  67 #define CONFIG_PHY_MARVELL              /* there is a marvell phy */
  68 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer aneg time */
  69
  70 #define CONFIG_SYS_CONSOLE_INFO_QUIET   /* don't print console @ startup */
  71 #define CONFIG_SYS_ALT_MEMTEST
  72
  73 /* SATA support */
  74 #define CONFIG_SYS_SATA_MAX_DEVICE      2
  75 #define CONFIG_SATA_MV
  76 #define CONFIG_LIBATA
  77 #define CONFIG_LBA48
  78 #define CONFIG_EFI_PARTITION
  79 #define CONFIG_DOS_PARTITION
  80
  81 /* Additional FS support/configuration */
  82 #define CONFIG_SUPPORT_VFAT
  83
  84 /* PCIe support */
  85 #ifndef CONFIG_SPL_BUILD
  86 #define CONFIG_PCI
  87 #define CONFIG_PCI_MVEBU
  88 #define CONFIG_PCI_PNP
  89 #define CONFIG_PCI_SCAN_SHOW
  90 #endif
  91
  92 /* NAND */
  93 #define CONFIG_SYS_NAND_USE_FLASH_BBT
  94 #define CONFIG_SYS_NAND_ONFI_DETECTION
  95
  96 /*
  97  * mv-common.h should be defined after CMD configs since it used them
  98  * to enable certain macros
  99  */
 100 #include "mv-common.h"
 101
 102 /*
 103  * Memory layout while starting into the bin_hdr via the
 104  * BootROM:
 105  *
 106  * 0x4000.4000 - 0x4003.4000    headers space (192KiB)
 107  * 0x4000.4030                  bin_hdr start address
 108  * 0x4003.4000 - 0x4004.7c00    BootROM memory allocations (15KiB)
 109  * 0x4007.fffc                  BootROM stack top
 110  *
 111  * The address space between 0x4007.fffc and 0x400f.fff is not locked in
 112  * L2 cache thus cannot be used.
 113  */
 114
 115 /* SPL */
 116 /* Defines for SPL */
 117 #define CONFIG_SPL_FRAMEWORK
 118 #define CONFIG_SPL_TEXT_BASE            0x40004030
 119 #define CONFIG_SPL_MAX_SIZE             ((128 << 10) - 0x4030)
 120
 121 #define CONFIG_SPL_BSS_START_ADDR       (0x40000000 + (128 << 10))
 122 #define CONFIG_SPL_BSS_MAX_SIZE         (16 << 10)
 123
 124 #ifdef CONFIG_SPL_BUILD
 125 #define CONFIG_SYS_MALLOC_SIMPLE
 126 #endif
 127
 128 #define CONFIG_SPL_STACK                (0x40000000 + ((192 - 16) << 10))
 129 #define CONFIG_SPL_BOOTROM_SAVE         (CONFIG_SPL_STACK + 4)
 130
 131 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 132 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 133 #define CONFIG_SPL_SERIAL_SUPPORT
 134 #define CONFIG_SPL_I2C_SUPPORT
 135
 136 /* SPL related SPI defines */
 137 #define CONFIG_SPL_SPI_SUPPORT
 138 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 139 #define CONFIG_SPL_SPI_LOAD
 140 #define CONFIG_SPL_SPI_BUS              0
 141 #define CONFIG_SPL_SPI_CS               0
 142 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x20000
 143 #define CONFIG_SYS_U_BOOT_OFFS          CONFIG_SYS_SPI_U_BOOT_OFFS
 144
 145 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
 146 #define CONFIG_SPD_EEPROM               0x4e
 147 #define CONFIG_BOARD_ECC_SUPPORT        /* this board supports ECC */
 148
 149 #endif /* _CONFIG_DB_MV7846MP_GP_H */