include/configs/db-mv784mp-gp.h

   1 /*
   2  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef _CONFIG_DB_MV7846MP_GP_H
   8 #define _CONFIG_DB_MV7846MP_GP_H
   9
  10 /*
  11  * High Level Configuration Options (easy to change)
  12  */
  13 #define CONFIG_ARMADA_XP                /* SOC Family Name */
  14 #define CONFIG_DB_784MP_GP              /* Board target name for DDR training */
  15
  16 #ifdef CONFIG_SPL_BUILD
  17 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  18 #endif
  19 #define CONFIG_DISPLAY_BOARDINFO_LATE
  20
  21 /*
  22  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  23  * for DDR ECC byte filling in the SPL before loading the main
  24  * U-Boot into it.
  25  */
  26 #define CONFIG_SYS_TEXT_BASE    0x00800000
  27 #define CONFIG_SYS_TCLK         250000000       /* 250MHz */
  28
  29 /*
  30  * Commands configuration
  31  */
  32 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  33 #define CONFIG_CMD_DHCP
  34 #define CONFIG_CMD_ENV
  35 #define CONFIG_CMD_I2C
  36 #define CONFIG_CMD_IDE
  37 #define CONFIG_CMD_NAND
  38 #define CONFIG_CMD_PCI
  39 #define CONFIG_CMD_PING
  40 #define CONFIG_CMD_SF
  41 #define CONFIG_CMD_SPI
  42 #define CONFIG_CMD_TFTPPUT
  43 #define CONFIG_CMD_TIME
  44
  45 /* I2C */
  46 #define CONFIG_SYS_I2C
  47 #define CONFIG_SYS_I2C_MVTWSI
  48 #define CONFIG_I2C_MVTWSI_BASE0         MVEBU_TWSI_BASE
  49 #define CONFIG_SYS_I2C_SLAVE            0x0
  50 #define CONFIG_SYS_I2C_SPEED            100000
  51
  52 /* USB/EHCI configuration */
  53 #define CONFIG_EHCI_IS_TDI
  54 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
  55
  56 /* SPI NOR flash default params, used by sf commands */
  57 #define CONFIG_SF_DEFAULT_SPEED         1000000
  58 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_3
  59 #define CONFIG_SPI_FLASH_STMICRO
  60
  61 /* Environment in SPI NOR flash */
  62 #define CONFIG_ENV_IS_IN_SPI_FLASH
  63 #define CONFIG_ENV_OFFSET               (1 << 20) /* 1MiB in */
  64 #define CONFIG_ENV_SIZE                 (64 << 10) /* 64KiB */
  65 #define CONFIG_ENV_SECT_SIZE            (64 << 10) /* 64KiB sectors */
  66
  67 #define CONFIG_PHY_MARVELL              /* there is a marvell phy */
  68 #define CONFIG_PHY_ADDR                 { 0x10, 0x11, 0x12, 0x13 }
  69 #define CONFIG_SYS_NETA_INTERFACE_TYPE  PHY_INTERFACE_MODE_QSGMII
  70 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer aneg time */
  71 #define CONFIG_RESET_PHY_R
  72
  73 #define CONFIG_SYS_CONSOLE_INFO_QUIET   /* don't print console @ startup */
  74 #define CONFIG_SYS_ALT_MEMTEST
  75
  76 /* SATA support */
  77 #ifdef CONFIG_CMD_IDE
  78 #define __io
  79 #define CONFIG_IDE_PREINIT
  80 #define CONFIG_MVSATA_IDE
  81
  82 /* Needs byte-swapping for ATA data register */
  83 #define CONFIG_IDE_SWAP_IO
  84
  85 #define CONFIG_SYS_ATA_REG_OFFSET       0x0100 /* Offset for register access */
  86 #define CONFIG_SYS_ATA_DATA_OFFSET      0x0100 /* Offset for data I/O */
  87 #define CONFIG_SYS_ATA_ALT_OFFSET       0x0100
  88
  89 /* Each 8-bit ATA register is aligned to a 4-bytes address */
  90 #define CONFIG_SYS_ATA_STRIDE           4
  91
  92 /* CONFIG_CMD_IDE requires some #defines for ATA registers */
  93 #define CONFIG_SYS_IDE_MAXBUS           2
  94 #define CONFIG_SYS_IDE_MAXDEVICE        CONFIG_SYS_IDE_MAXBUS
  95
  96 /* ATA registers base is at SATA controller base */
  97 #define CONFIG_SYS_ATA_BASE_ADDR        MVEBU_AXP_SATA_BASE
  98 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x2000
  99 #define CONFIG_SYS_ATA_IDE1_OFFSET      0x4000
 100
 101 #define CONFIG_DOS_PARTITION
 102 #endif /* CONFIG_CMD_IDE */
 103
 104 /* PCIe support */
 105 #define CONFIG_PCI
 106 #define CONFIG_PCI_MVEBU
 107 #define CONFIG_PCI_PNP
 108 #define CONFIG_PCI_SCAN_SHOW
 109 #define CONFIG_E1000    /* enable Intel E1000 support for testing */
 110
 111 /* NAND */
 112 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 113 #define CONFIG_SYS_NAND_ONFI_DETECTION
 114
 115 /*
 116  * mv-common.h should be defined after CMD configs since it used them
 117  * to enable certain macros
 118  */
 119 #include "mv-common.h"
 120
 121 /*
 122  * Memory layout while starting into the bin_hdr via the
 123  * BootROM:
 124  *
 125  * 0x4000.4000 - 0x4003.4000    headers space (192KiB)
 126  * 0x4000.4030                  bin_hdr start address
 127  * 0x4003.4000 - 0x4004.7c00    BootROM memory allocations (15KiB)
 128  * 0x4007.fffc                  BootROM stack top
 129  *
 130  * The address space between 0x4007.fffc and 0x400f.fff is not locked in
 131  * L2 cache thus cannot be used.
 132  */
 133
 134 /* SPL */
 135 /* Defines for SPL */
 136 #define CONFIG_SPL_FRAMEWORK
 137 #define CONFIG_SPL_TEXT_BASE            0x40004030
 138 #define CONFIG_SPL_MAX_SIZE             ((128 << 10) - 0x4030)
 139
 140 #define CONFIG_SPL_BSS_START_ADDR       (0x40000000 + (128 << 10))
 141 #define CONFIG_SPL_BSS_MAX_SIZE         (16 << 10)
 142
 143 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
 144                                          CONFIG_SPL_BSS_MAX_SIZE)
 145 #define CONFIG_SYS_SPL_MALLOC_SIZE      (16 << 10)
 146
 147 #define CONFIG_SPL_STACK                (0x40000000 + ((192 - 16) << 10))
 148 #define CONFIG_SPL_BOOTROM_SAVE         (CONFIG_SPL_STACK + 4)
 149
 150 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 151 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 152 #define CONFIG_SPL_SERIAL_SUPPORT
 153 #define CONFIG_SPL_I2C_SUPPORT
 154
 155 /* SPL related SPI defines */
 156 #define CONFIG_SPL_SPI_SUPPORT
 157 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 158 #define CONFIG_SPL_SPI_LOAD
 159 #define CONFIG_SPL_SPI_BUS              0
 160 #define CONFIG_SPL_SPI_CS               0
 161 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x20000
 162 #define CONFIG_SYS_U_BOOT_OFFS          CONFIG_SYS_SPI_U_BOOT_OFFS
 163
 164 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
 165 #define CONFIG_SYS_MVEBU_DDR_AXP
 166 #define CONFIG_SPD_EEPROM               0x4e
 167
 168 #endif /* _CONFIG_DB_MV7846MP_GP_H */