include/configs/dbau1x00.h

   1 /*
   2  * (C) Copyright 2003
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * This file contains the configuration parameters for the dbau1x00 board.
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #define CONFIG_DBAU1X00         1
  16 #define CONFIG_SOC_AU1X00       1  /* alchemy series cpu */
  17
  18 #define CONFIG_SYS_GENERIC_BOARD
  19 #define CONFIG_DISPLAY_BOARDINFO
  20
  21 #ifdef CONFIG_DBAU1000
  22 /* Also known as Merlot */
  23 #define CONFIG_SOC_AU1000       1
  24 #else
  25 #ifdef CONFIG_DBAU1100
  26 #define CONFIG_SOC_AU1100       1
  27 #else
  28 #ifdef CONFIG_DBAU1500
  29 #define CONFIG_SOC_AU1500       1
  30 #else
  31 #ifdef CONFIG_DBAU1550
  32 /* Cabernet */
  33 #define CONFIG_SOC_AU1550       1
  34 #else
  35 #error "No valid board set"
  36 #endif
  37 #endif
  38 #endif
  39 #endif
  40
  41 #define CONFIG_ETHADDR          DE:AD:BE:EF:01:01    /* Ethernet address */
  42
  43 #define CONFIG_BOOTDELAY        2       /* autoboot after 2 seconds     */
  44
  45 #define CONFIG_BAUDRATE         115200
  46
  47 /* valid baudrates */
  48
  49 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  50 #undef  CONFIG_BOOTARGS
  51
  52 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  53         "addmisc=setenv bootargs ${bootargs} "                          \
  54                 "console=ttyS0,${baudrate} "                            \
  55                 "panic=1\0"                                             \
  56         "bootfile=/tftpboot/vmlinux.srec\0"                             \
  57         "load=tftp 80500000 ${u-boot}\0"                                \
  58         ""
  59
  60 #ifdef CONFIG_DBAU1550
  61 /* Boot from flash by default, revert to bootp */
  62 #define CONFIG_BOOTCOMMAND      "bootm 0xbfc20000; bootp; bootm"
  63 #else /* CONFIG_DBAU1550 */
  64 #define CONFIG_BOOTCOMMAND      "bootp;bootm"
  65 #endif /* CONFIG_DBAU1550 */
  66
  67
  68 /*
  69  * BOOTP options
  70  */
  71 #define CONFIG_BOOTP_BOOTFILESIZE
  72 #define CONFIG_BOOTP_BOOTPATH
  73 #define CONFIG_BOOTP_GATEWAY
  74 #define CONFIG_BOOTP_HOSTNAME
  75
  76
  77 /*
  78  * Command line configuration.
  79  */
  80 #include <config_cmd_default.h>
  81
  82 #undef CONFIG_CMD_BDI
  83 #undef CONFIG_CMD_BEDBUG
  84 #undef CONFIG_CMD_ELF
  85 #undef CONFIG_CMD_SAVEENV
  86 #undef CONFIG_CMD_FAT
  87 #undef CONFIG_CMD_FPGA
  88 #undef CONFIG_CMD_MII
  89 #undef CONFIG_CMD_RUN
  90
  91
  92 #ifdef CONFIG_DBAU1550
  93
  94 #define CONFIG_CMD_FLASH
  95 #define CONFIG_CMD_LOADB
  96 #define CONFIG_CMD_NET
  97
  98 #undef CONFIG_CMD_I2C
  99 #undef CONFIG_CMD_IDE
 100 #undef CONFIG_CMD_NFS
 101 #undef CONFIG_CMD_PCMCIA
 102
 103 #else
 104
 105 #define CONFIG_CMD_IDE
 106 #define CONFIG_CMD_DHCP
 107
 108 #undef CONFIG_CMD_FLASH
 109 #undef CONFIG_CMD_LOADB
 110 #undef CONFIG_CMD_LOADS
 111
 112 #endif
 113
 114
 115 /*
 116  * Miscellaneous configurable options
 117  */
 118 #define CONFIG_SYS_LONGHELP                             /* undef to save memory      */
 119
 120 #define CONFIG_SYS_PROMPT               "DbAu1xx0 # "   /* Monitor Command Prompt    */
 121
 122 #define CONFIG_SYS_CBSIZE               256             /* Console I/O Buffer Size   */
 123 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)  /* Print Buffer Size */
 124 #define CONFIG_SYS_MAXARGS              16              /* max number of command args*/
 125
 126 #define CONFIG_SYS_MALLOC_LEN           128*1024
 127
 128 #define CONFIG_SYS_BOOTPARAMS_LEN       128*1024
 129
 130 #define CONFIG_SYS_MHZ                  396
 131
 132 #if (CONFIG_SYS_MHZ % 12) != 0
 133 #error "Invalid CPU frequency - must be multiple of 12!"
 134 #endif
 135
 136 #define CONFIG_SYS_MIPS_TIMER_FREQ      (CONFIG_SYS_MHZ * 1000000)
 137
 138 #define CONFIG_SYS_SDRAM_BASE           0x80000000     /* Cached addr */
 139
 140 #define CONFIG_SYS_LOAD_ADDR            0x81000000     /* default load address  */
 141
 142 #define CONFIG_SYS_MEMTEST_START        0x80100000
 143 #define CONFIG_SYS_MEMTEST_END          0x80800000
 144
 145 /*-----------------------------------------------------------------------
 146  * FLASH and environment organization
 147  */
 148 #ifdef CONFIG_DBAU1550
 149
 150 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of memory banks */
 151 #define CONFIG_SYS_MAX_FLASH_SECT       (512)   /* max number of sectors on one chip */
 152
 153 #define PHYS_FLASH_1            0xb8000000 /* Flash Bank #1 */
 154 #define PHYS_FLASH_2            0xbc000000 /* Flash Bank #2 */
 155
 156 #else /* CONFIG_DBAU1550 */
 157
 158 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of memory banks */
 159 #define CONFIG_SYS_MAX_FLASH_SECT       (128)   /* max number of sectors on one chip */
 160
 161 #define PHYS_FLASH_1            0xbec00000 /* Flash Bank #1 */
 162 #define PHYS_FLASH_2            0xbfc00000 /* Flash Bank #2 */
 163
 164 #endif /* CONFIG_DBAU1550 */
 165
 166 #define CONFIG_SYS_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2}
 167
 168 #define CONFIG_SYS_FLASH_CFI           1
 169 #define CONFIG_FLASH_CFI_DRIVER    1
 170
 171 /* The following #defines are needed to get flash environment right */
 172 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 173 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)
 174
 175 #define CONFIG_SYS_INIT_SP_OFFSET       0x400000
 176
 177 /* We boot from this flash, selected with dip switch */
 178 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_2
 179
 180 /* timeout values are in ticks */
 181 #define CONFIG_SYS_FLASH_ERASE_TOUT     (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
 182 #define CONFIG_SYS_FLASH_WRITE_TOUT     (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
 183
 184 #define CONFIG_ENV_IS_NOWHERE   1
 185
 186 /* Address and size of Primary Environment Sector       */
 187 #define CONFIG_ENV_ADDR         0xB0030000
 188 #define CONFIG_ENV_SIZE         0x10000
 189
 190 #define CONFIG_FLASH_16BIT
 191
 192 #define CONFIG_NR_DRAM_BANKS    2
 193
 194
 195 #ifdef CONFIG_DBAU1550
 196 #define MEM_SIZE 192
 197 #else
 198 #define MEM_SIZE 64
 199 #endif
 200
 201 #define CONFIG_MEMSIZE_IN_BYTES
 202
 203 #ifndef CONFIG_DBAU1550
 204 /*---ATA PCMCIA ------------------------------------*/
 205 #define CONFIG_SYS_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
 206 #define CONFIG_SYS_PCMCIA_MEM_ADDR 0x20000000
 207 #define CONFIG_PCMCIA_SLOT_A
 208
 209 #define CONFIG_ATAPI 1
 210 #define CONFIG_MAC_PARTITION 1
 211
 212 /* We run CF in "true ide" mode or a harddrive via pcmcia */
 213 #define CONFIG_IDE_PCMCIA 1
 214
 215 /* We only support one slot for now */
 216 #define CONFIG_SYS_IDE_MAXBUS           1       /* max. 1 IDE bus               */
 217 #define CONFIG_SYS_IDE_MAXDEVICE        1       /* max. 1 drive per IDE bus     */
 218
 219 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 220 #undef  CONFIG_IDE_RESET                /* reset for ide not supported  */
 221
 222 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 223
 224 #define CONFIG_SYS_ATA_BASE_ADDR       CONFIG_SYS_PCMCIA_MEM_ADDR
 225
 226 /* Offset for data I/O                  */
 227 #define CONFIG_SYS_ATA_DATA_OFFSET     8
 228
 229 /* Offset for normal register accesses  */
 230 #define CONFIG_SYS_ATA_REG_OFFSET      0
 231
 232 /* Offset for alternate registers       */
 233 #define CONFIG_SYS_ATA_ALT_OFFSET      0x0100
 234 #endif /* CONFIG_DBAU1550 */
 235
 236 /*-----------------------------------------------------------------------
 237  * Cache Configuration
 238  */
 239 #define CONFIG_SYS_DCACHE_SIZE          16384
 240 #define CONFIG_SYS_ICACHE_SIZE          16384
 241 #define CONFIG_SYS_CACHELINE_SIZE       32
 242
 243 #endif  /* __CONFIG_H */