include/configs/digsy_mtc.h

   1 /*
   2  * (C) Copyright 2003-2004
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * (C) Copyright 2005-2007
   6  * Modified for InterControl digsyMTC MPC5200 board by
   7  * Frank Bodammer, GCD Hard- & Software GmbH,
   8  *                 frank.bodammer@gcd-solutions.de
   9  *
  10  * (C) Copyright 2009 Semihalf
  11  * Optimized for digsyMTC by: Grzegorz Bernacki <gjb@semihalf.com>
  12  *
  13  * SPDX-License-Identifier:     GPL-2.0+
  14  */
  15
  16 #ifndef __CONFIG_H
  17 #define __CONFIG_H
  18
  19 /*
  20  * High Level Configuration Options
  21  */
  22
  23 #define CONFIG_MPC5xxx          1       /* This is an MPC5xxx CPU */
  24 #define CONFIG_MPC5200          1       /* (more precisely an MPC5200 CPU) */
  25 #define CONFIG_DIGSY_MTC        1       /* ... on InterControl digsyMTC board */
  26
  27 /*
  28  * Valid values for CONFIG_SYS_TEXT_BASE are:
  29  * 0xFFF00000   boot high (standard configuration)
  30  * 0xFE000000   boot low
  31  * 0x00100000   boot from RAM (for testing only)
  32  */
  33 #ifndef CONFIG_SYS_TEXT_BASE
  34 #define CONFIG_SYS_TEXT_BASE    0xFFF00000      /* Standard: boot high */
  35 #endif
  36
  37 #define CONFIG_SYS_MPC5XXX_CLKIN        33000000
  38
  39 #define CONFIG_SYS_CACHELINE_SIZE       32
  40
  41 /*
  42  * Serial console configuration
  43  */
  44 #define CONFIG_PSC_CONSOLE      4       /* console is on PSC4  */
  45 #define CONFIG_BAUDRATE         115200  /* ... at 115200  bps  */
  46 #define CONFIG_SYS_BAUDRATE_TABLE       \
  47         { 9600, 19200, 38400, 57600, 115200, 230400 }
  48
  49 /*
  50  * PCI Mapping:
  51  * 0x40000000 - 0x4fffffff - PCI Memory
  52  * 0x50000000 - 0x50ffffff - PCI IO Space
  53  */
  54 #define CONFIG_PCI              1
  55 #define CONFIG_PCI_PNP          1
  56 #define CONFIG_PCI_SCAN_SHOW    1
  57 #define CONFIG_PCI_BOOTDELAY    250
  58
  59 #define CONFIG_PCI_MEM_BUS      0x40000000
  60 #define CONFIG_PCI_MEM_PHYS     CONFIG_PCI_MEM_BUS
  61 #define CONFIG_PCI_MEM_SIZE     0x10000000
  62
  63 #define CONFIG_PCI_IO_BUS       0x50000000
  64 #define CONFIG_PCI_IO_PHYS      CONFIG_PCI_IO_BUS
  65 #define CONFIG_PCI_IO_SIZE      0x01000000
  66
  67 /*
  68  *  Partitions
  69  */
  70 #define CONFIG_DOS_PARTITION
  71 #define CONFIG_BZIP2
  72
  73 /*
  74  * Video
  75  */
  76 #define CONFIG_VIDEO
  77
  78 #ifdef CONFIG_VIDEO
  79 #define CONFIG_VIDEO_MB862xx
  80 #define CONFIG_VIDEO_MB862xx_ACCEL
  81 #define CONFIG_VIDEO_CORALP
  82 #define CONFIG_CFB_CONSOLE
  83 #define CONFIG_VIDEO_LOGO
  84 #define CONFIG_VIDEO_BMP_LOGO
  85 #define CONFIG_VIDEO_SW_CURSOR
  86 #define CONFIG_VGA_AS_SINGLE_DEVICE
  87 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  88 #define CONFIG_SPLASH_SCREEN
  89 #define CONFIG_VIDEO_BMP_GZIP
  90 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (2 << 20)       /* decompressed img */
  91
  92 /* Coral-PA clock frequency, geo and other both 133MHz */
  93 #define CONFIG_SYS_MB862xx_CCF  0x00050000
  94 /* Video SDRAM parameters */
  95 #define CONFIG_SYS_MB862xx_MMR  0x11d7fa72
  96 #endif
  97
  98 /*
  99  * Command line configuration.
 100  */
 101 #include <config_cmd_default.h>
 102
 103 #ifdef CONFIG_VIDEO
 104 #define CONFIG_CMD_BMP
 105 #endif
 106 #define CONFIG_CMD_CACHE
 107 #define CONFIG_CMD_DATE
 108 #define CONFIG_CMD_DHCP
 109 #define CONFIG_CMD_DIAG
 110 #define CONFIG_CMD_EEPROM
 111 #define CONFIG_CMD_ELF
 112 #define CONFIG_CMD_EXT2
 113 #define CONFIG_CMD_FAT
 114 #define CONFIG_CMD_I2C
 115 #define CONFIG_CMD_IDE
 116 #define CONFIG_CMD_IRQ
 117 #define CONFIG_CMD_MII
 118 #define CONFIG_CMD_PCI
 119 #define CONFIG_CMD_PING
 120 #define CONFIG_CMD_REGINFO
 121 #define CONFIG_CMD_SAVES
 122 #define CONFIG_CMD_SPI
 123 #define CONFIG_CMD_USB
 124
 125 #if (CONFIG_SYS_TEXT_BASE == 0xFF000000)
 126 #define CONFIG_SYS_LOWBOOT      1
 127 #endif
 128
 129 /*
 130  * Autobooting
 131  */
 132 #define CONFIG_BOOTDELAY        1
 133
 134 #undef  CONFIG_BOOTARGS
 135
 136 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 137         "fw_image=digsyMPC.img\0"                                       \
 138         "mtcb_start=mtc led diag orange; run mtcb_1\0"                  \
 139         "mtcb_clearled=for x in user1 user2 usbpwr usbbusy; "           \
 140                 "do mtc led $x; done\0"                                 \
 141         "mtcb_1=if mtc key; then run mtcb_clearled mtcb_update; "       \
 142                 "else run mtcb_fw; fi\0"                                \
 143         "mtcb_fw=if bootm ff000000; then echo FIRMWARE OK!; "           \
 144                 "else echo BAD FIRMWARE CRC!; mtc led diag red; fi\0"   \
 145         "mtcb_update=mtc led user1 orange;"                             \
 146                 "while mtc key; do ; done; run mtcb_2;\0"               \
 147         "mtcb_2=mtc led user1 green 2; usb reset; run mtcb_usb1;\0"     \
 148         "mtcb_usb1=if fatload usb 0 400000 script.img; "                \
 149                 "then run mtcb_doscript; else run mtcb_usb2; fi\0"      \
 150         "mtcb_usb2=if fatload usb 0 400000 $fw_image; "                 \
 151                 "then run mtcb_dousb; else run mtcb_ide; fi\0"          \
 152         "mtcb_doscript=run mtcb_usbleds; mtc led user2 orange 2; "      \
 153                 "run mtcb_wait_flickr mtcb_ds_1;\0"                     \
 154         "mtcb_ds_1=if imi 400000; then mtc led usbbusy; "               \
 155                 "source 400000; else run mtcb_error; fi\0"              \
 156         "mtcb_dousb=run mtcb_usbleds mtcb_wait_flickr mtcb_du_1;\0"     \
 157         "mtcb_du_1=if imi 400000; then run mtcb_du_2; "                 \
 158                 "else run mtcb_error; fi\0"                             \
 159         "mtcb_du_2=run mtcb_clear mtcb_prog; mtc led usbbusy; "         \
 160                 "run mtcb_checkfw\0"                                    \
 161         "mtcb_checkfw=if imi ff000000; then run mtcb_success; "         \
 162                 "else run mtcb_error; fi\0"                             \
 163         "mtcb_waitkey=mtc key; until test $? -eq 0; do mtc key; done\0" \
 164         "mtcb_wait_flickr=run mtcb_waitkey mtcb_uledflckr\0"            \
 165         "mtcb_usbleds=mtc led usbpwr green; mtc led usbbusy orange 1;\0"\
 166         "mtcb_uledflckr=mtc led user1 orange 11\0"                      \
 167         "mtcb_error=mtc led user1 red\0"                                \
 168         "mtcb_clear=erase ff000000 ff0fffff\0"                          \
 169         "mtcb_prog=cp.b 400000 ff000000 ${filesize}\0"                  \
 170         "mtcb_success=mtc led user1 green\0"                            \
 171         "mtcb_ide=if fatload ide 0 400000 $fw_image;"                   \
 172                 "then run mtcb_doide; else run mtcb_error; fi\0"        \
 173         "mtcb_doide=mtc led user2 green 1;"                             \
 174                 "run mtcb_wait_flickr mtcb_di_1;\0"                     \
 175         "mtcb_di_1=if imi 400000; then run mtcb_di_2;"                  \
 176                 "else run mtcb_error; fi\0"                             \
 177         "mtcb_di_2=run mtcb_clear; run mtcb_prog mtcb_checkfw\0"        \
 178         "ramdisk_num_sector=16\0"                                       \
 179         "flash_base=ff000000\0"                                         \
 180         "flashdisk_size=e00000\0"                                       \
 181         "env_sector=fff60000\0"                                         \
 182         "flashdisk_start=ff100000\0"                                    \
 183         "load_cmd=tftp 400000 digsyMPC.img\0"                           \
 184         "clear_cmd=erase ff000000 ff0fffff\0"                           \
 185         "flash_cmd=cp.b 400000 ff000000 ${filesize}\0"                  \
 186         "update_cmd=run load_cmd; "                                     \
 187         "iminfo 400000; "                                               \
 188         "run clear_cmd flash_cmd; "                                     \
 189         "iminfo ff000000\0"                                             \
 190         "spi_driver=yes\0"                                              \
 191         "spi_watchdog=no\0"                                             \
 192         "ftps_start=yes\0"                                              \
 193         "ftps_user1=admin\0"                                            \
 194         "ftps_pass1=admin\0"                                            \
 195         "ftps_base1=/\0"                                                \
 196         "ftps_home1=/\0"                                                \
 197         "plc_sio_srv=no\0"                                              \
 198         "plc_sio_baud=57600\0"                                          \
 199         "plc_sio_parity=no\0"                                           \
 200         "plc_sio_stop=1\0"                                              \
 201         "plc_sio_com=2\0"                                               \
 202         "plc_eth_srv=yes\0"                                             \
 203         "plc_eth_port=1200\0"                                           \
 204         "plc_root=/ide/\0"                                              \
 205         "diag_level=0\0"                                                \
 206         "webvisu=no\0"                                                  \
 207         "plc_can1_routing=no\0"                                         \
 208         "plc_can1_baudrate=250\0"                                       \
 209         "plc_can2_routing=no\0"                                         \
 210         "plc_can2_baudrate=250\0"                                       \
 211         "plc_can3_routing=no\0"                                         \
 212         "plc_can3_baudrate=250\0"                                       \
 213         "plc_can4_routing=no\0"                                         \
 214         "plc_can4_baudrate=250\0"                                       \
 215         "netdev=eth0\0"                                                 \
 216         "console=ttyPSC0\0"                                             \
 217         "kernel_addr_r=400000\0"                                        \
 218         "fdt_addr_r=600000\0"                                           \
 219         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 220         "nfsroot=${serverip}:${rootpath}\0"                             \
 221         "addip=setenv bootargs ${bootargs} "                            \
 222         "ip=${ipaddr}:${serverip}:${gatewayip}:"                        \
 223         "${netmask}:${hostname}:${netdev}:off panic=1\0"                \
 224         "addcons=setenv bootargs ${bootargs} console=${console},${baudrate}\0"\
 225         "rootpath=/opt/eldk/ppc_6xx\0"                                  \
 226         "net_nfs=tftp ${kernel_addr_r} ${bootfile};"                    \
 227                 "tftp ${fdt_addr_r} ${fdt_file};"                       \
 228                 "run nfsargs addip addcons;"                            \
 229                 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"              \
 230         "load=tftp 200000 ${u-boot}\0"                                  \
 231         "update=protect off FFF00000 +${filesize};"                     \
 232                 "erase FFF00000 +${filesize};"                          \
 233                 "cp.b 200000 FFF00000 ${filesize};"                     \
 234                 "protect on FFF00000 +${filesize}\0"                    \
 235         ""
 236
 237 #define CONFIG_BOOTCOMMAND      "run mtcb_start"
 238
 239 /*
 240  * SPI configuration
 241  */
 242 #define CONFIG_HARD_SPI         1
 243 #define CONFIG_MPC52XX_SPI      1
 244
 245 /*
 246  * I2C configuration
 247  */
 248 #define CONFIG_HARD_I2C         1
 249 #define CONFIG_SYS_I2C_MODULE   1
 250 #define CONFIG_SYS_I2C_SPEED    100000
 251 #define CONFIG_SYS_I2C_SLAVE    0x7F
 252
 253 /*
 254  * EEPROM configuration
 255  */
 256 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50    /* 1010000x */
 257 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 258 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 259 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   70
 260
 261 /*
 262  * RTC configuration
 263  */
 264 #if defined(CONFIG_DIGSY_REV5)
 265 #define CONFIG_SYS_I2C_RTC_ADDR 0x56
 266 #define CONFIG_RTC_RV3029
 267 /* Enable 5k Ohm trickle charge resistor */
 268 #define CONFIG_SYS_RV3029_TCR   0x20
 269 #else
 270 #define CONFIG_RTC_DS1337
 271 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 272 #define CONFIG_SYS_DS1339_TCR_VAL       0xAB    /* diode + 4k resistor */
 273 #endif
 274
 275 /*
 276  * Flash configuration
 277  */
 278 #define CONFIG_SYS_FLASH_CFI            1
 279 #define CONFIG_FLASH_CFI_DRIVER 1
 280
 281 #if defined(CONFIG_DIGSY_REV5)
 282 #define CONFIG_SYS_FLASH_BASE           0xFE000000
 283 #define CONFIG_SYS_FLASH_BASE_CS1       0xFC000000
 284 #define CONFIG_SYS_MAX_FLASH_BANKS      2
 285 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE, \
 286                                         CONFIG_SYS_FLASH_BASE_CS1}
 287 #define CONFIG_SYS_UPDATE_FLASH_SIZE
 288 #define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
 289 #else
 290 #define CONFIG_SYS_FLASH_BASE           0xFF000000
 291 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 292 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
 293 #endif
 294
 295 #define CONFIG_SYS_MAX_FLASH_SECT       256
 296 #define CONFIG_FLASH_16BIT
 297 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
 298 #define CONFIG_SYS_FLASH_SIZE   0x01000000
 299 #define CONFIG_SYS_FLASH_ERASE_TOUT     240000
 300 #define CONFIG_SYS_FLASH_WRITE_TOUT     500
 301
 302 #define CONFIG_OF_LIBFDT  1
 303 #define CONFIG_OF_BOARD_SETUP   1
 304
 305 #define OF_CPU                  "PowerPC,5200@0"
 306 #define OF_SOC                  "soc5200@f0000000"
 307 #define OF_TBCLK                (bd->bi_busfreq / 4)
 308
 309 #define CONFIG_BOARD_EARLY_INIT_R
 310 #define CONFIG_MISC_INIT_R
 311
 312 /*
 313  * Environment settings
 314  */
 315 #define CONFIG_ENV_IS_IN_FLASH  1
 316 #if defined(CONFIG_LOWBOOT)
 317 #define CONFIG_ENV_ADDR         0xFF060000
 318 #else   /* CONFIG_LOWBOOT */
 319 #define CONFIG_ENV_ADDR         0xFFF60000
 320 #endif  /* CONFIG_LOWBOOT */
 321 #define CONFIG_ENV_SIZE         0x10000
 322 #define CONFIG_ENV_SECT_SIZE    0x20000
 323 #define CONFIG_ENV_OVERWRITE    1
 324
 325 /*
 326  * Memory map
 327  */
 328 #define CONFIG_SYS_MBAR         0xF0000000
 329 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 330 #if !defined(CONFIG_SYS_LOWBOOT)
 331 #define CONFIG_SYS_DEFAULT_MBAR 0x80000000
 332 #else
 333 #define CONFIG_SYS_DEFAULT_MBAR 0xF0000000
 334 #endif
 335
 336 /*
 337  *  Use SRAM until RAM will be available
 338  */
 339 #define CONFIG_SYS_INIT_RAM_ADDR        MPC5XXX_SRAM
 340 #define CONFIG_SYS_INIT_RAM_SIZE                MPC5XXX_SRAM_SIZE
 341
 342 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 343         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 344 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 345
 346 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 347 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 348 #define CONFIG_SYS_RAMBOOT              1
 349 #endif
 350
 351 #define CONFIG_SYS_MONITOR_LEN  (256 << 10)
 352 #define CONFIG_SYS_MALLOC_LEN   (4096 << 10)
 353 #define CONFIG_SYS_BOOTMAPSZ    (8 << 20)
 354
 355 /*
 356  * Ethernet configuration
 357  */
 358 #define CONFIG_MPC5xxx_FEC      1
 359 #define CONFIG_MPC5xxx_FEC_MII100
 360 #if defined(CONFIG_DIGSY_REV5)
 361 #define CONFIG_PHY_ADDR         0x01
 362 #else
 363 #define CONFIG_PHY_ADDR         0x00
 364 #endif
 365 #define CONFIG_PHY_RESET_DELAY  1000
 366
 367 #define CONFIG_NETCONSOLE               /* include NetConsole support   */
 368
 369 /*
 370  * GPIO configuration
 371  * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1)
 372  *  Bit 0   (mask 0x80000000) : 0x1
 373  * SPI on Tmr2/3/4/5 pins
 374  *  Bit 2:3 (mask 0x30000000) : 0x2
 375  * ATA cs0/1 on csb_4/5
 376  *  Bit 6:7 (mask 0x03000000) : 0x2
 377  * Ethernet 100Mbit with MD
 378  *  Bits 12:15 (mask 0x000f0000): 0x5
 379  * USB - Two UARTs
 380  *  Bits 18:19 (mask 0x00003000) : 0x2
 381  * PSC3 - USB2 on PSC3
 382  *  Bits 20:23 (mask 0x00000f00) : 0x1
 383  * PSC2 - CAN1&2 on PSC2 pins
 384  *  Bits 25:27 (mask 0x00000070) : 0x1
 385  * PSC1 - AC97 functionality
 386  *  Bits 29:31 (mask 0x00000007) : 0x2
 387  */
 388 #define CONFIG_SYS_GPS_PORT_CONFIG      0xA2552112
 389
 390 /*
 391  * Miscellaneous configurable options
 392  */
 393 #define CONFIG_SYS_LONGHELP
 394 #define CONFIG_AUTO_COMPLETE    1
 395 #define CONFIG_CMDLINE_EDITING  1
 396 #define CONFIG_SYS_PROMPT       "=> "
 397 #define CONFIG_SYS_HUSH_PARSER
 398
 399 #define CONFIG_AUTOBOOT_KEYED
 400 #define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay
 401 #define CONFIG_AUTOBOOT_DELAY_STR       " "
 402
 403 #define CONFIG_LOOPW            1
 404 #define CONFIG_MX_CYCLIC        1
 405 #define CONFIG_ZERO_BOOTDELAY_CHECK
 406
 407 #define CONFIG_SYS_CBSIZE               1024
 408 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 409 #define CONFIG_SYS_MAXARGS              32
 410 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 411
 412 #define CONFIG_SYS_ALT_MEMTEST
 413 #define CONFIG_SYS_MEMTEST_SCRATCH      0x00001000
 414 #define CONFIG_SYS_MEMTEST_START        0x00010000
 415 #define CONFIG_SYS_MEMTEST_END          0x019fffff
 416
 417 #define CONFIG_SYS_LOAD_ADDR            0x00100000
 418
 419 #define CONFIG_SYS_HZ                   1000
 420
 421 /*
 422  * Various low-level settings
 423  */
 424 #define CONFIG_SYS_SDRAM_CS1            1
 425 #define CONFIG_SYS_XLB_PIPELINING       1
 426
 427 #define CONFIG_SYS_HID0_INIT            HID0_ICE | HID0_ICFI
 428 #define CONFIG_SYS_HID0_FINAL           HID0_ICE
 429
 430 #if defined(CONFIG_SYS_LOWBOOT)
 431 #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
 432 #define CONFIG_SYS_BOOTCS_SIZE          CONFIG_SYS_FLASH_SIZE
 433 #define CONFIG_SYS_BOOTCS_CFG           0x0002DD00
 434 #endif
 435
 436 #define CONFIG_SYS_CS4_START            0x60000000
 437 #define CONFIG_SYS_CS4_SIZE             0x1000
 438 #define CONFIG_SYS_CS4_CFG              0x0008FC00
 439
 440 #define CONFIG_SYS_CS0_START            CONFIG_SYS_FLASH_BASE
 441 #define CONFIG_SYS_CS0_SIZE             CONFIG_SYS_FLASH_SIZE
 442 #define CONFIG_SYS_CS0_CFG              0x0002DD00
 443
 444 #if defined(CONFIG_DIGSY_REV5)
 445 #define CONFIG_SYS_CS1_START            CONFIG_SYS_FLASH_BASE_CS1
 446 #define CONFIG_SYS_CS1_SIZE             CONFIG_SYS_FLASH_SIZE
 447 #define CONFIG_SYS_CS1_CFG              0x0002DD00
 448 #endif
 449
 450 #define CONFIG_SYS_CS_BURST             0x00000000
 451 #define CONFIG_SYS_CS_DEADCYCLE 0x11111111
 452
 453 #if !defined(CONFIG_SYS_LOWBOOT)
 454 #define CONFIG_SYS_RESET_ADDRESS        0xfff00100
 455 #else
 456 #define CONFIG_SYS_RESET_ADDRESS        0xff000100
 457 #endif
 458
 459 /*
 460  * USB
 461  */
 462 #define CONFIG_USB_OHCI_NEW
 463 #define CONFIG_SYS_OHCI_BE_CONTROLLER
 464 #define CONFIG_USB_STORAGE
 465
 466 #define CONFIG_USB_CLOCK        0x00013333
 467 #define CONFIG_USB_CONFIG       0x00002000
 468
 469 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      15
 470 #define CONFIG_SYS_USB_OHCI_REGS_BASE   MPC5XXX_USB
 471 #define CONFIG_SYS_USB_OHCI_SLOT_NAME   "mpc5200"
 472 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 473
 474 /*
 475  * IDE/ATA
 476  */
 477 #define CONFIG_IDE_RESET
 478 #define CONFIG_IDE_PREINIT
 479
 480 #define CONFIG_SYS_ATA_CS_ON_I2C2
 481 #define CONFIG_SYS_IDE_MAXBUS           1
 482 #define CONFIG_SYS_IDE_MAXDEVICE        1
 483
 484 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 485 #define CONFIG_SYS_ATA_BASE_ADDR        MPC5XXX_ATA
 486 #define CONFIG_SYS_ATA_DATA_OFFSET      (0x0060)
 487 #define CONFIG_SYS_ATA_REG_OFFSET       (CONFIG_SYS_ATA_DATA_OFFSET)
 488 #define CONFIG_SYS_ATA_ALT_OFFSET       (0x005C)
 489 #define CONFIG_SYS_ATA_STRIDE           4
 490
 491 #define CONFIG_ATAPI            1
 492 #define CONFIG_LBA48            1
 493
 494 #endif /* __CONFIG_H */